Datenblatt-pdf.com


K2611 Schematic ( PDF Datasheet ) - Toshiba Semiconductor

Teilenummer K2611
Beschreibung 9A, 900V, N-Channel MOSFET, 2SK2611
Hersteller Toshiba Semiconductor
Logo Toshiba Semiconductor Logo 




Gesamt 6 Seiten
K2611 Datasheet, Funktion
www.DataSheet4U.com
2SK2611
TOSHIBA Field Effect Transistor Silicon N Channel MOS Type (π−MOSIII)
2SK2611
DCDC Converter, Relay Drive and Motor Drive
Applications
Unit: mm
z Low drainsource ON resistance : RDS (ON) = 1.1 (typ.)
z High forward transfer admittance : |Yfs| = 7.0 S (typ.)
z Low leakage current
: IDSS = 100 μA (max) (VDS = 720 V)
z Enhancementmode
: Vth = 2.0~4.0 V (VDS = 10 V, ID = 1 mA)
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Symbol
Rating
Unit
Drainsource voltage
Draingate voltage (RGS = 20 k)
Gatesource voltage
Drain current
DC (Note 1)
Pulse (Note 1)
Drain power dissipation (Tc = 25°C)
Single pulse avalanche energy
(Note 2)
Avalanche current
Repetitive avalanche energy (Note 3)
Channel temperature
Storage temperature range
VDSS
VDGR
VGSS
ID
IDP
PD
EAS
IAR
EAR
Tch
Tstg
900
900
±30
9
27
150
663
9
15
150
55~150
V
V
V
A
A
W
mJ
A
mJ
°C
°C
1. GATE
2. DRAIN (HEAT SINK)
3. SOURCE
JEDEC
JEITA
SC-65
TOSHIBA
2-16C1B
Weight: 4.6 g (typ.)
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in
temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e.
operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate
reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and
Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc).
Thermal Characteristics
Characteristics
Symbol
Max Unit
Thermal resistance, channel to case
Thermal resistance, channel to
ambient
Rth (chc)
Rth (cha)
0.833
50
°C / W
°C / W
Note 1: Please use devices on condition that the channel temperature is below 150°C.
Note 2: VDD = 90 V, Tch = 25°C (initial), L = 15 mH, RG = 25 , IAR = 9 A
Note 3: Repetitive rating: Pulse width limited by maximum channel temperature
This transistor is an electrostatic sensitive device.
Please handle with caution.
1 2006-11-10






K2611 Datasheet, Funktion
www.DataSheet4U.com
2SK2611
RESTRICTIONS ON PRODUCT USE
The information contained herein is subject to change without notice.
20070701-EN
TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
6 2006-11-10

6 Page







SeitenGesamt 6 Seiten
PDF Download[ K2611 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
K2610MOSFET ( Transistor ) - 2SK2610Toshiba Semiconductor
Toshiba Semiconductor
K26119A, 900V, N-Channel MOSFET, 2SK2611Toshiba Semiconductor
Toshiba Semiconductor
K2611BSilicon N-Channel MOSFETWinsemi
Winsemi
K2613MOSFET ( Transistor ) - 2SK2613Toshiba Semiconductor
Toshiba Semiconductor
K2614MOSFET ( Transistor ) - 2SK2614Toshiba
Toshiba

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche