Datenblatt-pdf.com


AQ8200 Schematic ( PDF Datasheet ) - Ando

Teilenummer AQ8200
Beschreibung Optical Test and Measurement System
Hersteller Ando
Logo Ando Logo 




Gesamt 12 Seiten
AQ8200 Datasheet, Funktion
www.DataSheet4U.com
Optical Test and
Measurement System
AQ8200 Series
For general evaluation of DWDM optical devices
AQ8202-01
AQ8202
AQ8204
AQ8203






AQ8200 Datasheet, Funktion
www.DataSheet4U.com
AQ8201-110 WDM DFB-LD Module (Light source)
Available wavelength range
Wavelength accuracy
Wavelength setting resolution
Spectral linewidth NARROW
WIDE
Optical output level
SMSR
Output level stability 15 minutes
24 hours
Wavelength stability 15 minutes
24 hours
Wavelength range
Optical attenuation range
Optical isolation
RIN
Internal modulation
Applicable fiber
Optical connector
Laser product safety class
Environmental conditions
Dimensions and mass
1524.110 to 1620.500 nm 1)
±0.01 nm (typ.) 2)
0.001 nm
5 MHz or less 3)
50 MHz (typ.) 3)
+10 dBm or more 2, 4)
45 dB (typ.) 3)
Within ±0.005 dB 5)
Within ±0.03 dB 5)
Within ±0.005 nm 2)
Within ±0.01 nm 2)
1.6 nm or more 2)
10 dB (0.01 dB step)
55 dB (typ.)
-145 dB/Hz (typ.) 3)
100 Hz to 300 kHz (CHOP)
SM (9/125 µm)
FC/Angled PC 6)
IEC60825-1: class3A,
21CFR1040.10: class IIIb 7)
Operation temperature: 5 to 40 °C
Storage temperature: 0 to 50 °C
Humidity: 85 % RH or less (no condensation)
Approx. 39.5 (W) x 130 (H) x 339 (D) mm
Approx. 0.7 kg
*Specifications assured at fixed temperature within 25±3 °C
*Specifications assured after warm-up for one hour
Notes:
1) Select from AQ8201-110 available wavelength.
2) Ambient temperature: 25±3 °C (at constant temperature), CW light, attenuation 0.0 dB,
central wavelength, at fiber end (FC/Angled PC-FC/SPC, 2 m, SMF), spectral linewidth:
NARROW
3) CW light, attenuation 0.0 dB, central wavelength
4) Using master cord
5) Ambient temperature: 25±3 °C (at constant temperature), CW light, attenuation 0.0 dB,
central wavelength, at fiber end (FC/Angled PC-FC/SPC, 2 m, SMF), spectral linewidth: WIDE
6) Angled PC manufactured by SEIKOH GIKEN or equivalent (step type)
7) Label examples
Laser product safety class label
• Option 01 (for high output level)
Optical output level
+13 dBm or more
Note: Ambient temperature: 25±3 °C, CW light, attenuation 0.0 dB, central wavelength, at
fiber end (FC/Angled PC-FC/SPC, 2 m, SMF or PMF), spectral linewidth: NARROW, using
master cord
• Option 02 (for PMF)
Applicable fiber
Polarization extinction ratio
PM (9/125 µm)
20 dB or more Note
Note: CW light, attenuation 0.0 dB, central wavelength, spectral linewidth: NARROW,
assured at the end of the optical connector mounted on the panel
• Option 03 External modulation (for sine waveform)
External modulation
Input connector
100 Hz to 300 kHz
SMA
Note: Cannot use Option 03 and Option 04 simultaneously
• Option 04 External modulation (for CHOP)
External modulation
Input connector
100 Hz to 300 kHz
SMA
Note: Cannot use Option 04 and Option 03 simultaneously
*Option 01 – 04 can be specified only in case of new order; unless specifically noted, options
can be used simultaneously
AQ8201-12, 12A ASE Module (Light source)
Spectrum density (-13 dBm/nm)
Total output power
Output level stability 5 minutes
1 hour
Optical modulation mode
Polarization extinction ratio
Optical attenuation range
Applicable fiber
Optical connector
Laser product safety class
Environmental conditions
Dimensions and mass
1525 to 1570 nm (typ.) 1)
1530 to 1565 nm 1)
+10 dBm or more 1, 2) (AQ8201-12)
+15 dBm or more 1, 2) (AQ8201-12A)
±0.005 dB (typ.) 1, 3)
Within ±0.05 dB 1, 4)
CW
0.1 dB (typ.)
6 dB (0.1 dB step)
SM (9/125 µm)
AQ9441 (*) Universal Adapter (option) 5)
IEC60825-1: class 3A
21CFR1040.10: class IIIb 6)
Operation temperature: 5 to 40 °C
Storage temperature: 0 to 50 °C
Humidity: 85 % RH or less (no condensation)
Approx. 79.5 (W) x 130 (H) x 339 (D) mm
Approx. 1.3 kg
*Specifications assured at fixed temperature within 25±3 °C
*Specifications assured after warm-up for one hour
Notes:
1) CW light, attenuation 0.0 dB, at SM fiber end (both end FC/PC, 2 m)
2) Using master cord
3) 5 minutes (at constant temperature in 20 to 30 °C)
4) One hour (at a temperature in 5 to 40 °C)
5) Specify FC, SC or ST.
6) Label examples
Laser product safety class label
6

6 Page









AQ8200 pdf, datenblatt
www.DataSheet4U.com
*Specifications are subject to change without notice.
Ando Electric Co., Ltd.
3-484, Tsukagoshi, Saiwai-ku, Kawasaki, Kanagawa, 212-8519 Japan Phone: +81 (0)44 549 7300 Fax: +81 (0)44 549 7450
Ando Corporation
20420 Century Boulevard Germantown, MD 20874, U.S.A. Phone: +1 301 916 0409 Fax: +1 301 916 1498
SAN JOSE OFFICE: 2021 N. Capitol Avenue, San Jose, CA 95132, U.S.A. Phone: +1 408 941 0100 Fax: +1 408 941 0103
Ando Europe B.V.
“Vijverdam”, Dalsteindreef 57, 1112XC Diemen, The Netherlands Phone: +31(0)20 698 1441 Fax: +31(0)20 699 8938
NIEDERLASSUNG DEUTSCHLAND: Nymphenburger Straße 119 B, D-80636 München, Germany Phone: +49(0)89 143 8150 Fax: +49(0)89 143 81555
Ando Electric Singapore Pte. Ltd.
19 Kim Keat Road #05-03, Fu Tsu Building, Singapore 328804 Phone: +65 251 1391 Fax: +65 251 1987
Ando Shanghai Trading Co., Ltd.
Room 202, Citic Pent-OX Business Building, No. 1081 Pudong Ave. Shanghai, China 200135 Phone: +86 21 5821 6240 Fax: +86 21 5821 9254
www.ando.comPlease visit our website for more information:
KT-1928-1 0201 KL250
Printed in Japan

12 Page





SeitenGesamt 12 Seiten
PDF Download[ AQ8200 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
AQ8200Optical Test and Measurement SystemAndo
Ando

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche