|
|
Número de pieza | AP1091 | |
Descripción | Power AMplifier | |
Fabricantes | RFIC | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de AP1091 (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
No Preview Available ! www.DataSheet4U.com
2003.03.27
AP1091
2.4~2.5 GHz Power Amplifier
AP1091 is a linear, two stages power amplifier MMIC
with high output power in 2.4GHz band utilizing
InGaP/GaAs HBT process. With the excellent linearity
performance, the device delivers 26 dBm of linear
output power (at 5V power supply)compliant with the
IEEE802.11b standard, and 19 dBm output power,
under 54Mbps OFDM (IEEE802.11g) modulation, with
only 3% EVM. The PA also includes on-chip power
detector, providing a DC voltage proportional to the
output power of the device. It features a small signal
gain of 28 dB and P1dB of 26.5 dBm at 3.3V power
supply. AP1091 is housed in a 3 x 3 (mm),16 Pin QFN
leadless package.
Major Applications
Pin Details
• 26/24 dBm Linear Output Power at 5/3.3 V
• Power Supply With 11Mb/s, CCK Modulation
• 19 dBm Linear Output Power With 54Mb/s,
OFDM Modulation (about 3% EVM)
• 28 dB Small Signal Gain
• Single 3.3 V Power Supply
• On-Chip Power Detector
• IEEE802.11b WLAN System
• IEEE802.11g (draft) WLAN System
• 2.4GHz ISM Radios
Functional Block Diagram
16 15 14 13
RF IN 1
12 RF OUT
GND 2
Input
Match
11 RF OUT
Dect_V 3
Dect_Out 4
5
10 RF OUT
Bias
Detector
9 NC
678
QFN- 16 pin, 3 x 3 (mm)
Pin Number Name
Description
1
RF_IN
RF input. With on chip input matching.
2 GND
DC and RF ground.
3 Dect_V Supply voltage for on-chip power detector.
Power detector output. Connect one 5.6kΩ
4 Dect_Out resistor and one 1uF capacitor from pin4
to ground.
5
6
7
8
9
10
11
12
13
14
15
16
Package
Base
VB1
Bias current control voltage for the
first/second stage. An external resistor
bridge is necessary for single voltage
VB2 supply application. The detail configuration
can be found in Application Notes.
GND
DC and RF ground.
NC
NC
No contact
RF_OUT
RF_OUT
RF_OUT
RF output. Require external matching. The
detail configuration can be found in
Application Notes
VCC1
VCC1
Supply voltage for first stage. Some
bypass capacitors are needed for system
application. The detail configuration can
be found in Application Notes.
NC
NC
No contact
The package ground provides circuit
Center Metal ground as well as heat dissipation path for
the power amplifier.
For more information,please contact us at:
© 2003 RF Integrated Corporation. All rights reserved.
Sales Dept.
Tel: +886-2-2698-1022
e-mail: [email protected]
RF integrated Corp. reserved the right to make any changes to the specifications without notice.
1 of 7
1 page www.DataSheet4U.com
2003.03.27
Data Charts
Fig. 9
POUT, PAE vs. PIN
(CW Mode)
28 42
24 36
20 30
16 24
12 18
8 12
46
00
-19 -17 -15 -13 -11 -9 -7 -5 -3 -1
Input Power (dBm)
POUT
PAE
Fig. 11
I TOTAL, Detector Output vs. Output Power
(CW Mode)
400 1.8
370 1.6
340 1.4
310 1.2
280 1.0
250 0.8
220 0.6
190 0.4
160 0.2
130 0.0
10 12 14 16 18 20 22 24 26 27
AP1091
2.4~2.5 GHz Power Amplifier
Fig. 10
POUT, PAE vs. PIN
(With 11Mb/s, CCK Modulation)
28 35
24 30
20 25
16 20
12 15
8 10
45
00
-12 -11 -10 -9 -8 -7 -6 -5 -4 -2
Input Power (dBm)
POUT
PAE
Fig. 12
I TOTAL, Detector Output vs. Output Power
(With 11Mb/s, CCK Modulation)
400 1.4
360 1.2
320 1.0
280 0.8
240 0.6
200 0.4
160 0.2
120 0.0
16.5 17.5 18.5 19.5 20.5 21.5 22.5 23.5 24.5 25.5
Output Power (dBm)
I TOTAL
Detector Output
Output Power (dBm)
I TOTAL
Detector Output
For more information,please contact us at:
© 2003 RF Integrated Corporation. All rights reserved.
Sales Dept.
Tel: +886-2-2698-1022
e-mail: [email protected]
RF integrated Corp. reserved the right to make any changes to the specifications without notice.
5 of 7
5 Page |
Páginas | Total 7 Páginas | |
PDF Descargar | [ Datasheet AP1091.PDF ] |
Número de pieza | Descripción | Fabricantes |
AP1091 | Power AMplifier | RFIC |
AP1092 | Power AMplifier | RFIC |
AP1093 | Power AMplifier | RFIC |
AP1098 | Power AMplifier | RFIC |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |