Datenblatt-pdf.com


NY-12W-K Schematic ( PDF Datasheet ) - Fujitsu

Teilenummer NY-12W-K
Beschreibung (NY Series) Power Relay
Hersteller Fujitsu
Logo Fujitsu Logo 




Gesamt 7 Seiten
NY-12W-K Datasheet, Funktion
www.DataSheet4U.com
POWER RELAY
1 POLE— 5 A (CADMIUM FREE CONTACTS TYPE)
NY SERIES
RoHS compliant
n FEATURES
l Ultra slim type with 5 mm thickness
—Good for high density mounting
l Low power consumption and high sensitivity
—Nominal coil power: 120 mW
—Operating power: 54 mW
l UL, CSA, VDE recognized
l Conforms to IEC 1010-1 and 1131-2
l Wide operating range
l SIL pitch terminals
l Plastic sealed type
l Compatible with solid state I/O module type SN (see
page 376) in size and pin (terminal) arrangement
l Environmentally friendly cadmium free contact type is
available.
l RoHS compliant since date code: 0439C1
Please see page 6 for more information
n ORDERING INFORMATION
NY P – 12 W – K
[Example]
(a) (b) (*) (c) (d) (e)
(a )
(b)
Series Name
Terminal Classification
NY : NY Series
Nil : PC board mounting type
P : Socket mounting type
(c) Nominal Voltage
Refer to the COIL DATA CHART
(d) Contact
W : Bifurcated type
(e) Enclosure
K : Plastic sealed type
Note: Actual marking omits the hyphen (-) of (*)
n SAFETY STANDARD AND FILE NUMBERS
UL508 (File No. E56140)
C22.2 No. 14 (File No. LR35579)
VDE0435 (File No. 11039-4940-1013)
Please note that UL/CSA ratings may differ from the standard ratings.
Nominal voltage
Contact rating
4.5 to 24 VDC
1/8 HP 125 VAC/250 VAC
5 A 30 VDC/250 VAC resistive
Pilot duty C 300
1






NY-12W-K Datasheet, Funktion
www.DataSheet4U.com
NY SERIES
RoHS Compliance and Lead Free Relay Information
1. General Information
l Relays produced after the specific date code that is indicated on each data sheet are lead-free
now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info.
(http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf)
l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu.
l All signal and most power relays also comply with RoHS. Please refer to individual data
sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that
are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE).
l It has been verified that using lead-free relays in leaded assembly process will not cause any
problems (compatible).
l “LF” is marked on each outer and inner carton. (No marking on individual relays).
l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office.
l We will ship leaded relays as long as the leaded relay inventory exists.
Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC)
2. Recommended Lead Free Solder Profile
l Recommended solder paste Sn-3.0Ag-0.5Cu.
Reflow Solder condtion
Flow Solder condtion:
Pre-heating: maximum 120˚C
Soldering: dip within 5 sec. at
260˚C soler bath
Solder by Soldering Iron:
Soldering Iron
Temperature: maximum 360˚C
Duration:
maximum 3 sec.
We highly recommend that you confirm your actual solder conditions
3. Moisture Sensitivity
l Moisture Sensitivity Level standard is not applicable to electromechanical realys.
4. Tin Whisker
l Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in
house test.


6 Page







SeitenGesamt 7 Seiten
PDF Download[ NY-12W-K Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
NY-12W-K(NY Series) Power RelayFujitsu
Fujitsu

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche