Datenblatt-pdf.com


NV-FJ604 Schematic ( PDF Datasheet ) - Panasonic

Teilenummer NV-FJ604
Beschreibung (NV-FJ604 - NV-FJ610) Video Recoder
Hersteller Panasonic
Logo Panasonic Logo 




Gesamt 34 Seiten
NV-FJ604 Datasheet, Funktion
www.DataSheet4U.com
Video Cassette Recorder
NV-FJ610 Series
NV-FJ606 Series
NV-FJ604 Series
Operating Instructions
VQT8539
Before attempting to connect, operate or adjust this product,
please read these instructions completely.






NV-FJ604 Datasheet, Funktion
www.DataSheet4U.com
Setting the Remote Control to Operate Your TV
Only Panasonic TVs can be operated with the provided
remote control.
The settings for operating the TV with the remote control
have already been made.
No additional settings need to be performed.
However, some Panasonic TVs cannot be operated using
this remote control.
The 3 Methods for Switching
to the AV Input on Your Panasonic TV
Your Panasonic TV uses one of three different methods for
switching between TV reception and the AV input(s). Perform
the operations steps listed for the switching methods A, B
and C below to determine which one your Panasonic TV
uses.
TV Operation
The explanations below show you what functions individual
buttons have when the VCR/TV switch N is set to TV.
A
°°1 TV-ON/OFF button
To switch the TV on from standby mode (OFF) or vice
versa.
On some TVs it is only possible to switch the TV to
standby mode (OFF) with this button, but not on. In this
case, try to turn the TV on with one of the following
buttons:
Numeric buttons 2
AV button 3
Channel button M
B
°°2 Numeric buttons
To select the programme positions (199) on the TV.
°°3 AV button
To select the desired AV input on the TV.
C
°°M Channel button
To select the desired programme position (TV station) on
the TV.
°°U Teletext buttons
If your TV is equipped for Teletext reception, you can use
these buttons to change the teletext information
displayed on the screen and select desired information.
For details, refer to your TVs operating instructions.
°°V TV ASPECT button
To switch the screen format between the wide-screen
and other formats.
°°W VOLUME button
To adjust the volume of the TV.
1 Set the VCR/TV switch N to TV.
2 Press the AV button 3 to switch to the AV Input.
Each press of the AV button 3 switches between
TV receptionand AV Input(s).
1 Set the VCR/TV switch N to TV.
2 Press the AV button 3.
Colour bars for selecting the AV Input appear on
the TV screen.
3 Follow the instructions displayed on the TV screen
to select the desired AV Input from the displayed
colour bars for the AV Input by pressing the
corresponding colour button @ (red) :, DATEi
(green) ;, ONi (yellow) F or OFFi (blue) E on
the remote control.
1 Set the VCR/TV switch N to TV.
2 Press the AV 3 button.
The last previously selected AV Input indication
appears on the TV screen. The indications for
selecting another AV Input also appear,
but they disappear a few seconds later.
3 Before the indications for selecting another AV
Input disappear, press the ? button :, DATEp
button ;, ONp button F or OFFp button E to
select the desired AV input.
With the following four buttons, you can move and
select as follows:
? ::
Move left
DATEp ;: Move down
ONp F: Move up
OFFp E: Move right
°°X TV/TEXT button
To switch between normal TV mode and teletext mode.
6

6 Page









NV-FJ604 pdf, datenblatt
www.DataSheet4U.com
To Display the Approximate Remaining
Tape Time
The remaining tape time can be displayed in the VCR
display.
1 Press the TAPE button B and select the corresponding
cassette tape length.
See page 26.
2 Press the OSD/DISPLAY button 5 repeatedly until the
Remaining Tape Time appears on the VCR display.
Pressing the OSD/DISPLAY button 5 once makes the
On Screen Display appear; after that, pressing it
repeatedly changes the indication in the following
order:
Clock
Counter
Remaining Tape Time
For certain cassettes, the remaining tape time may not be
displayed correctly.
To Prevent Accidental Erasure of Recorded
Contents
When you record again onto a previously
recorded video cassette, the previous
recording is automatically erased and
replaced with the new recording.
Therefore, to prevent accidental
erasure of the recorded contents,
break out the erasure prevention
tab after recording.
Erasure prevention tab
Use a screwdriver or similar tool to break out the tab.
To Record Again onto the Video Cassette with a Broken
Out Erasure Prevention Tab:
If you insert a video cassette with a
broken out erasure prevention tab and
press the REC button I, the 1
indication flashes on the VCR display to
indicate that recording is not possible.
In this case, cover the tab hole with two
Adhesive tape
layers of adhesive tape.
The adhesive tape substitutes for the prevention erasure tab
and makes it possible to record again on this cassette.
To Perform an OTR Recording:
1 Display the VCR picture on the TV.
2 Insert a video cassette with an intact erasure prevention
tab.
3 Press the Channel buttons M to select the programme
position on which the TV programme to be recorded will
be broadcast.
4 Press the REC/OTR button ^ to start recording.
5 Press the REC/OTR button ^ repeatedly to select the
desired recording duration.
Every time you press this button, the recording
duration indicated in the VCR display changes in the
following order.
For example, if you select 30, the VCR records a
programme from that moment on for 30 minutes.
Counter display
(normal recording mode)
240
(min.)
180
(min.)
30
(min.)
60
(min.)
120
(min.)
To Stop the OTR Recording Before the End:
Press the Stop button 9.
Linked Timer Recordings with a
Digital Receiver
When the AV2 socket of this VCR is connected by a 21-pin
cable to a Digital Receiver, it is possible to have timer
recordings for a Digital Receiver execute automatically
simply by switching the Digital Receiver into timer standby
mode and then switching this VCR into timer recording
standby mode.
Note that linked timer recordings may not work properly
with some Digital Receivers.
1 Make sure that AV2is set to TIMER.
(See page 27.)
2 Insert a video cassette with an intact erasure prevention
tab into the VCR.
3 Switch the Digital Receiver over to the timer standby
mode.
To Select the Recording
Duration and Perform Timer
Recording
(OTR Recording)
OTR means One-Touch Recording and is called this way,
because you can start recording and select the recording
duration by repeatedly pressing a single button. This is very
convenient, for example when you want to start recording
immediately but need to go out or want to go to bed.
After the selected recording duration has elapsed, recording
stops and the VCR automatically switches off.
12
4 Press the TIMER REC button C to switch the VCR over
to the timer recording standby mode.
This VCR does not require any further special timer
recording operations.
The recording will start at the date and time
programmed for the Digital Receiver.
Notes:
Always connect the Digital Receiver to be used for timer
recordings to the AV2 socket of this VCR using a 21-pin
cable.
Linked timer recordings are not counted in the total time of
timer recording programmings.
Make sure that the date and time of the linked timer
recording does not conflict with that of a VCR. If
programmed recordings do overlap, either linked timer
recording or timer recording of VCR have the priority.

12 Page





SeitenGesamt 34 Seiten
PDF Download[ NV-FJ604 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
NV-FJ604(NV-FJ604 - NV-FJ610) Video RecoderPanasonic
Panasonic
NV-FJ606(NV-FJ604 - NV-FJ610) Video RecoderPanasonic
Panasonic

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche