|
|
Número de pieza | ON2253 | |
Descripción | Reflective photosensor | |
Fabricantes | Panasonic Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de ON2253 (archivo pdf) en la parte inferior de esta página. Total 3 Páginas | ||
No Preview Available ! wwwR.DeaflteacSthiveeet4PUh.cootomsensors (Photo Reflectors)
CNZ2253 (ON2253)
Reflective Photosensor
Overview
CNZ2253 is a photosensor detecting the change of reflective light
in which a high efficiency GaAs infrared light emitting diode is used
as the light emitting element, and a high sensitivity Si Darlington
phototransistor is used as the light detecting element. The two
elements are located parallel in the same direction and objects are
detected when passing in front of the device.
Features
High sensitivity
Small size and light weight
Applications
Detection of paper, film and cloth Optical mark reading
Detection of position and edge
Detection of coin and bill
Mark for indicating
LED side
7.5±0.2
(3.2)
Unit : mm
10.6±0.3
9.6±0.3
ø2.2±0.2
ø0.45±0.05
(7.2)
ø0.3±0.05
2 3 *2-0.9±0.15
Start, end mark detection of magnetic tape
Absolute Maximum Ratings (Ta = 25˚C)
Parameter
Symbol Ratings
Reverse voltage (DC)
Input (Light
Forward current (DC)
emitting diode)
Power dissipation
VR
IF
PD*1
3
50
75
Collector to emitter voltage
Output (Photo Emitter to collector voltage
transistor) Collector current
Collector power dissipation
VCEO
VECO
IC
PC*2
20
5
30
100
Temperature
Operating ambient temperature Topr –25 to +85
Storage temperature
Tstg –30 to +100
Unit
V
mA
mW
V
V
mA
mW
˚C
˚C
Electrical Characteristics (Ta = 25˚C)
14
(Note)
1 23
4
1. ( ) Dimension is reference
Pin connection
2. * is dimension at the root of leads
*1 Input power derating ratio is
1.0 mW/˚C at Ta ≥ 25˚C.
*2 Output power derating ratio is
1.34 mW/˚C at Ta ≥ 25˚C.
Parameter
Symbol
Conditions
min typ max Unit
Forward voltage (DC)
Input
characteristics Reverse current (DC)
Capacitance between terminals
VF IF = 50mA
IR VR = 3V
Ct VR = 0V, f = 1MHz
1.2 1.5 V
10 µA
50 pF
Output characteristics Collector cutoff current
ICEO VCE = 10V
0.5 µA
Transfer Collector current
characteristics Response time
IC*1*2 VCC = 5V, IF = 10mA, RL = 100Ω
tr*3 , tf*4 VCC = 10V, IC = 1mA, RL = 100Ω
3 30 mA
150 µs
Collector to emitter saturation voltage VCE(sat) IF = 50mA, IC = 1mA
1.5 V
*1 IC classifications
*2 Transfer characteristics measurement circuit
Class Q R S (Ambient light is shut off completely)
IC (mA)
3 to 9
6 to 18
12 to 30
*3 Time required for the collector current to increase
from 10% to 90% of its final value.
*4 Time required for the collector current to decrease
from 90% to 10% of its initial value.
tr
90%
10%
tf
IF
VCC
IC
d = 3 mm
RL Standard white paper
(Reflective ratio 90%)
Note) The part number in the parenthesis shows conventional part number.
1
1 page |
Páginas | Total 3 Páginas | |
PDF Descargar | [ Datasheet ON2253.PDF ] |
Número de pieza | Descripción | Fabricantes |
ON2253 | Reflective photosensor | Panasonic Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |