|
|
PDF KGL4126HA Data sheet ( Hoja de datos )
| Número de pieza | KGL4126HA | |
| Descripción | 11.3 GBPS Mach-zehnder Modulator Driver ic | |
| Fabricantes | Oki Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de KGL4126HA (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
1 Electronic Components
KGL4126HA
11.3 Gbps Mach-Zehnder Modulator Driver IC
March 3, 2004
GTD-28643 Rev. 2.0
Preliminary
FEATURES
• High Output Voltage: Maximum Amplitude > 5.7 Vpp
• X-Point Control Function
• Output Amplitude Control Function
• Small Package : 7mm x 7mm QFP
FUNCTION DIAGRAM
INB
IN
OUT
VB1 VB2
VS
ABSOLUTE MAXIMUM RATINGS
VC1
Parameter
Supply Voltage
X-Point Control Voltage
Current Source FET Gate Bias Voltage
DC Bias for Output Stage Amplifier
Operating Temperature at Package Base
Storage Temperature
Symbol
VS
VB1
VC1
VD
Ts
Tst
Min
-6.5
VS-4.5
(Min. -6.5)
-6.5
0
-10
-40
Max
0.3
VS+2.0
(Max. 0.3)
VS+1.2
(Max. 0.3)
5.0
100
125
Unit
V
V
V
V
°C
°C
Note
RECOMMENDED OPERATING CONDITIONS
Parameter
Symbol
Min
Typ
Max Unit
Supply Voltage
DC Bias for Output Stage Amplifier *1,2
VS -5.46
VD 2.0
-4.94
4.0
V
V
X-Point Control Voltage
VB1 VS+1.1
VS+1.5
Current Source FET Gate Bias Voltage *1,3
VC1
VS VS+0.85 VS+1.0
V
V
Input Amplitude : Differential
: Single – Ended
0.25
Vin
0.5
1 Vpp
1 Vpp
Operating Temperature at Package Base
Ts
0
70 °C
Input Interface
AC coupled (External blocking capacitor is required)
Output Interface
AC coupled (External Bias-T is required for VD)
*1 Output amplitude can be tuned by control voltage VD.
*2 VD is supplied at Output Port using External Bias-T.
*3 It is recommended to set VC1 to a fixed value between VS+0.7V and VS+1.0V.
1/5
1 page  
www.DataSheet4U.com
1 Electronic Components
GTD-28643 Rev. 2.0
KGL4126HA
SAFETY AND HANDLING INFORMATION ON GaAs DEVICES
Arsenic Compound (GaAs Devices)
The product contains arsenic (As) as a compound.
This material is stable for normal use, however, its dust or vapor may be potentially hazardous to the human
body.
Avoid ingestion, fracture, burning or chemical treatment to the product.
• Do not put the product in your mouth.
• Do not burn or destroy the product.
• Do not perform chemical treatment for the product.
Keep laws and ordinances related to the disposal of the products.
NOTICE
1. The information contained herein can change without notice owing to product and/or technical improvements.
Before using the product, please make sure that the information being referred to is up-to-date.
2. The outline of action and examples for application circuits described herein have been chosen as an
explanation for the standard action and performance of the product. When planning to use the product, please
ensure that the external conditions are reflected in the actual circuit, assembly, and program designs.
3. When designing your product, please use our product below the specified maximum ratings and within the
specified operating ranges including, but not limited to, operating voltage, power dissipation, and operating
temperature.
4. Oki assumes no responsibility or liability whatsoever for any failure or unusual or unexpected operation
resulting from misuse, neglect, improper installation, repair, alteration or accident, improper handling, or
unusual physical or electrical stress including, but not limited to, exposure to parameters beyond the specified
maximum ratings or operation outside the specified operating range.
5. Neither indemnity against nor license of a third party’s industrial and intellectual property right, etc. is
granted by us in connection with the use of the product and/or the information and drawings contained herein.
No responsibility is assumed by us for any infringement of a third party’s right which may result from the use
thereof.
6. The products listed in this document are intended for use in general electronics equipment for commercial
applications (e.g., office automation, communication equipment, measurement equipment, consumer
electronics, etc.). These products are not authorized for use in any system or application that requires special
or enhanced quality and reliability characteristics nor in any system or application where the failure of such
system or application may result in the loss or damage of property, or death or injury to humans.
Such applications include, but are not limited to, traffic and automotive equipment, safety devices, aerospace
equipment, nuclear power control, medical equipment, and life-support systems.
7. Certain products in this document may need government approval before they can be exported to particular
countries. The purchaser assumes the responsibility of determining the legality of export of these products
and will take appropriate and necessary steps at their own expense for these.
8. No part of the contents contained herein may be reprinted or reproduced without our prior permission.
Copyright 2004 Oki Electric Industry Co., Ltd.
5/5
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet KGL4126HA.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| KGL4126HA | 11.3 GBPS Mach-zehnder Modulator Driver ic | Oki Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |