Datenblatt-pdf.com


PC923L0NSZ Schematic ( PDF Datasheet ) - Sharp Electrionic

Teilenummer PC923L0NSZ
Beschreibung Gate Drive DIP 8 pin OPIC Photocoupler
Hersteller Sharp Electrionic
Logo Sharp Electrionic Logo 




Gesamt 18 Seiten
PC923L0NSZ Datasheet, Funktion
www.DataSheet4U.com
PC923L0NSZ
Series
PC923L0NSZ Series
High Speed, Gate Drive DIP 8 pin
OPIC Photocoupler
Description
PC923L0NSZ Series contains a LED optically cou-
pled to an OPIC chip.
It is packaged in a 8 pin DIP, available in SMT gullw-
ing lead form option.
Input-output isolation voltage(rms) is 5.0 kV, High
speed response (tPHL, tPLH : MAX. 0.5 µs).
Features
1. 8 pin DIP package
2. Double transfer mold package
(Ideal for Flow Soldering)
3. Built-in direct drive circuit for MOSFET / IGBT drive
(IO1P, IO2P : 0.6 A)
4. High speed response (tPHL, tPLH : MAX. 0.5 µs)
5. Wide operating supply voltage range
(VCC=15 to 30 V)
6. High noise immunity due to high instantaneous com-
mon mode rejection voltage (CMH : MIN. 15kV/µs,
CML : MIN. 15kV/µs)
7. High isolation voltage between input and output
(Viso(rms) : 5.0 kV)
Agency approvals/Compliance
1. Recognized by UL1577 (Double protection isolation),
file No. E64380 (as model No. PC923L)
2. Approved by VDE (VDE0884) (as an option), file No.
87446 (as model No. PC923L)
3. Package resin : UL flammability grade (94V-0)
Applications
1. IGBT/MOSFET gate drive for inverter control
"OPIC"(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signal-processing
circuit integrated onto a single chip.
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: D2-A06001EN
1 Date Nov. 28. 2003
© SHARP Corporation






PC923L0NSZ Datasheet, Funktion
PC923L0NSZ Series
Model Line-up
Lead Form
Through-Hole
Package
Sleeve
50pcs/sleeve
VDE0884 −−−−−−
Approved
−−−−−−
Model No. PC923L0NSZ PC923L0YSZ PC923L0NIZ
SMT Gullwing
Taping
1 000pcs/reel
Approved
−−−−−−
Approved
PC923L0YIZ PC923L0NIP PC923L0YIP
Please contact a local SHARP sales representative to inquire about production status and Lead-Free options.
Sheet No.: D2-A06001EN
6

6 Page









PC923L0NSZ pdf, datenblatt
Design Considerations
Recommended operating conditions
Parameter
Symbol MIN. TYP.
Forward current
Supply voltage
Operating temperature
IF
VCC
Topr
10
15
40
MAX.
20
30
70
Unit
mA
V
˚C
PC923L0NSZ Series
Notes about static electricity
Transistor of detector side in bipolar configuration may be damaged by static electricity due to its minute de-
sign.
When handling these devices, general countermeasure against static electricity should be taken to avoid
breakdown of devices or degradation of characteristics.
Design guide
In order to stabilize power supply line, we should certainly recommend to connect a by-pass capacitor of
0.01µF or more between VCC and GND near the device.
In case that some sudden big noise caused by voltage variation is provided between primary and secondary
terminals of photocoupler some current caused by it is floating capacitance may be generated and result in
false operation since current may go through LED or current may change.
If the photocoupler may be used under the circumstances where noise will be generated we recommend to
use the bypass capacitors at the both ends of LED.
The detector which is used in this device, has parasitic diode between each pins and GND.
There are cases that miss operation or destruction possibly may be occurred if electric potential of any pin
becomes below GND level even for instant.
Therefore it shall be recommended to design the circuit that electric potential of any pin does not become
below GND level.
This product is not designed against irradiation and incorporates non-coherent LED.
This photocoupler is dedicated to the use for IGBT or MOSFET Gate Drive.
Please do not use this for the other application.
As mentioned below, when the input is on, if DC load (resistor etc.) is connected between O2 output pin 6
and GND pin 7 and if the electric potential VO2 goes approx. 2V below than electric potential VCC pin 8 con-
tinuously, supply current ICC may flow more than usually and go beyond power dissipation.
8A
2
5
IF PC923L
6
3
7
2V or more
VCC
Sheet No.: D2-A06001EN
12

12 Page





SeitenGesamt 18 Seiten
PDF Download[ PC923L0NSZ Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
PC923L0NSZGate Drive DIP 8 pin OPIC PhotocouplerSharp Electrionic
Sharp Electrionic

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche