|
|
PDF SW-442 Data sheet ( Hoja de datos )
| Número de pieza | SW-442 | |
| Descripción | GaAs SPDT Terminated Switch | |
| Fabricantes | Tyco Electronics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SW-442 (archivo pdf) en la parte inferior de esta página. Total 3 Páginas | ||
|
No Preview Available !
wwGwaA.DsaStaPSDheTeTt4eUrm.cionmated Switch, DC - 3.0 GHz
SW-442
SW-442
GaAs SPDT Terminated Switch
DC - 3.0 GHz
Features
• Low Cost Plastic SOT-26 Package
• Low Insertion Loss <0.6 dB @ 900 MHz
• High Isolation >38 dB @ 900 MHz
• Low Power Consumption <10µA @ +3V
• Positive or Negative 2.5 to 8 V Control
SOT-26 Plastic Package
Description
M/A-COM’s SW-442 is a GaAs monolithic switch in a low cost
SOT-26 surface mount plastic package. The SW-442 is ideally
suited for applications where very low power consumption, low
insertion loss, very small size and low cost are required. Typical
application is in dual band systems where switching between
small signal components is required such as filter banks, single
band LNA's, converters etc. The SW-442 can be used in applica-
tions up to 0.25 Watts in systems such as CDMA, W-CDMA,
PCS, DCS1800, GSM and other analog/digital wireless commu-
nications systems.
XX#Y
PIN1
The SW-442 is fabricated using a mature 0.8 micron GaAs
MESFET process. The process features full passivation for
increased performance and reliability.
Ordering Information
Part Number
Package
SW-442 PIN
SW-442TR
SW-442RTR
SOT-26 Plastic Package
Forward Tape and Reel 1
Reverse Tape and Reel1
SW-442SMB
Sample Board
Electrical Specifications TA = 25°C
1. Reference Application Note M513 for reel size information.
Parameter
Insertion Loss
Isolation
VSWR
DC - 1 GHz
1- 2 GHz
2 - 3 GHz
DC - 1 GHz
1 - 2 GHz
2 - 3 GHz
DC - 2 GHz
2 - 3 GHz
Test Conditions
Units
dB
dB
dB
dB
dB
dB
Min.
36
25
21
Typ.
0.5
0.8
1.1
38
28
22
1.4:1
1.6:1
Max.
0.7
1.0
1.25
1.5:1
1.7:1
P1dB (2.7V supply)
P1dB (5V supply)
IP2 (2.7V supply)
IP3 (2.7V supply)
Trise, Tfall
Ton, Toff
Transients
Gate Leakage
500 MHz - 3 GHz
500 MHz - 3 GHz
2-Tone 900 MHz, 5 MHz spacing, 10 dBm each tone
2-Tone 900 MHz, 5 MHz spacing, 10 dBm each tone
10% to 90% RF, 90% to 10% RF
50% Control to 90% RF, Control to 10% RF
In-Band
VCTL = 2.5V
dBm
dBm
dBm
dBm
ns
ns
mV
µA
24
28
80
50
40
60
10
6 15
M/A-COM Division of AMP Incorporated 3 North America: Tel. (800) 366-2266, Fax (800) 618-8883 3 Asia/Pacific: Tel.+81 44 844 8296, Fax +81 44 844 8298
3 Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
www.macom.com
AMP and Connecting at a Higher Level are trademarks.
Specifications subject to change without notice.
V2.00
1 page | ||
| Páginas | Total 3 Páginas | |
| PDF Descargar | [ Datasheet SW-442.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SW-442 | GaAs SPDT Terminated Switch | Tyco Electronics |
| SW-444 | 2V Control Triple-Band GSM/DCS/PCS SP5T Switch | Tyco Electronics |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |