RA07H4452M Datasheet PDF - Mitsubishi Electric
| Part Number | RA07H4452M | |
| Description | RoHS Compliance | |
| Manufacturers | Mitsubishi Electric | |
| Logo |  |
|
|
There is a preview and RA07H4452M download ( pdf file ) link at the bottom of this page. Total 8 Pages | ||
Preview 1 page No Preview Available !
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
MITSUBISHI RF MOSFET MODULE
RA07H4452M
RoHS Compliance ,440-520MHz 7W 12.5V, 2 Stage Amp. For PORTABLE RADIO
DESCRIPTION
The RA07H4452M is a 7-watt RF MOSFET Amplifier Module
for 12.5-volt portable radios that operate in the 440- to 520-MHz
range.
The battery can be connected directly to the drain of the
enhancement-mode MOSFET transistors. Without the gate
voltage (VGG=0V), only a small leakage current flows into the
drain and the RF input signal attenuates up to 60 dB. The output
power and drain current increase as the gate voltage increases.
With a gate voltage around 2.5V (minimum), output power and
drain current increases substantially. The nominal output power
becomes available at 3V (typical) and 3.5V (maximum). At
VGG=3.5V, the typical gate current is 1 mA.
This module is designed for non-linear FM modulation, but may
also be used for linear modulation by setting the drain quiescent
current with the gate voltage and controlling the output power
with the input power.
FEATURES
• Enhancement-Mode MOSFET Transistors
(IDD≅0 @ VDD=12.5V, VGG=0V)
• Pout>7W @ VDD=12.5V, VGG=3.5V, Pin=20mW
• ηT>40% @ Pout=7W (VGG control), VDD=12.5V, Pin=20mW
• Broadband Frequency Range: 440-520MHz
www.DataSheet4U.•coLm ow-Power Control Current IGG=1mA (typ) at VGG=3.5V
• Module Size: 30 x 10 x 5.4 mm
• Linear operation is possible by setting the quiescent drain
current with the gate voltage and controlling the output power
with the input power
BLOCK DIAGRAM
2
3
14
5
1 RF Input (Pin)
2 Gate Voltage (VGG), Power Control
3 Drain Voltage (VDD), Battery
4 RF Output (Pout)
5 RF Ground (Case)
PACKAGE CODE: H46S
RoHS COMPLIANCE
• RA07H4452M-101 is a is a RoHS compliant products.
• RoHS compliance is indicate by the letter “G” after the Lot Marking.
• This product include the lead in the Glass of electronic parts and the
lead in electronic Ceramic parts.
How ever ,it applicable to the following exceptions of RoHS Directions.
1.Lead in the Glass of a cathode-ray tube, electronic parts, and
fluorescent tubes.
2.Lead in electronic Ceramic parts.
ORDERING INFORMATION:
ORDER NUMBER
RA07H4452M-101
SUPPLY FORM
Antistatic tray,
25 modules/tray
RA07H4452M
MITSUBISHI ELECTRIC
1/8
24 Jan 2006
|
| |
 
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
MITSUBISHI RF POWER MODULE
RoHS COMPLIANCE RA07H4452M
OUTLINE DRAWING (mm)
(1.7)
(4.4)
30.0 ±0.2
26.6 ±0.2
21.2 ±0.2
5
1 234
2-R1.5 ±0.1
6.1 ±1
13.7 ±1
18.8 ±1
23.9 ±1
Ø0.45 ±0.15
(19.2)
1 RF Input (Pin)
2 Gate Voltage (VGG)
3 Drain Voltage (VDD)
4 RF Output (Pout)
5 RF Ground (Case)
RA07H4452M
MITSUBISHI ELECTRIC
5/8
24 Jan 2006
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for RA07H4452M electronic component. |
| Information | Total 8 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ RA07H4452M.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| RA07H4452M | The function is RoHS Compliance. Mitsubishi Electric | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
RA07
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||