|
|
PDF MF-2500FXD Data sheet ( Hoja de datos )
| Número de pieza | MF-2500FXD | |
| Descripción | 2.5Gbps SFP TRANSCEIVER MODULE | |
| Fabricantes | Mitsubishi Electric | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MF-2500FXD (archivo pdf) en la parte inferior de esta página. Total 14 Páginas | ||
|
No Preview Available !
Mitsubishi Electric Corp.
Datasheet
MITSUBISHI (OPTICAL DEVICES)
MF-2500FXD Series
2.5Gbps SFP TRANSCEIVER MODULE
2.7Gbps Multi-Rate, S-16.1 / IR-1 SFP Transceiver with Digital
Diagnostic Monitoring Interface MF-2500FXD Series
1. Description
www.DataSheet4U.com
This transceiver is compliant with Small
Form-factor Pluggable (SFP) MSA, and
optimized for SDH S-16.1, / SONET IR-1
applications.
The optical subassembly consists of two parts,
the transmitter with an uncooled DFB laser in
a hermetic sealed coaxial module, the receiver
with a PD preamp in a hermetic sealed coaxial
module and integrated circuits for reshaping
received optical signals.
The built-in serial ID recognition is
incorporated, which allows users to interface
with two wire serial interface that displays
information on manufacturer, part number,
link, distance, and other parameters.
The Digital Diagnostic Monitoring interface is
incorporated, which monitors transceiver
parameters including Temperature, Supply
voltage, Laser bias current, Laser power and
Received optical power.
2. Features
• Small Form-factor Pluggable (SFP) MSA compliant transceiver with SONET/SDH system Quality
• S-16.1/IR-1 (15km) application
• 155Mbps to 2.7Gbps Multi-Rate operation capability
• LC duplex receptacle
• Single +3.3V power supply
• Differential data inputs and outputs
• Operating case temperature range -5°C to +85°C / -40°C to +85°C
• Comply with SFF-8472 MSA
• Built-in Programmable receiver low pass filter as application select
• Incorporating Digital Diagnostic Monitoring Interface with External calibration
(Internal calibration is optional)
• Serial ID Functionality
• Bail latch type
• RoHS Compliant
UQ9-06-006 Ed:1.0 Date:10.Oct.2006
Page 1 of 14
1 page  
MITSUBISHI (OPTICAL DEVICES)
MF-2500FXD Series
2.5Gbps SFP TRANSCEIVER MODULE
7. Digital Diagnostic Monitoring Accuracy
The diagnostic monitoring features external calibration, and is calibrated over operating temperature and
voltage range. The monitor parameters are represented as defined in SFF-8472.
These parameters of the monitoring accuracy are guaranteed, as long as operating conditions of this SFP
transceiver do not exceed ranges defined below.
Digital Diagnostic Monitoring Accuracy
Parameter
Min.
Transceiver Temperature*1
-3
Max.
+3
Unit Range for Accurate Monitoring
°C -5 to 85°C(M41ZB) / -40 to 85°C(M41ZC)
Supply Voltage
-3 +3 %
3 to 3.6 V
TX Bias Current
TX Optical Power
RX Optical Power
-10 +10
-3(-1.5*2) +3(+1.5*2)
-3(-2*2) +3(+2*2)
%
dB
dB
-
-5 to 0 dBm
-19 to +1 dBm
*1: Transceiver Temperature is defined as an internal ambient temperature.
*2: These specs are optional.
8. Selective Bandwidth filtering function
Receiver bandwidth can be selected by the setting of Rate Select pins (7pin and 9pin).
Each bit rates for the selective bandwidth and adaptable protocols are as follows.
No. Rate Select 0 (7pin) Rate Select 1 (9pin)
1 Low
Low
2 High
Low
3 Low
High
4 High
High
Bandwidth
Full
1.25Gbps
622Mbps
155Mbps
Adaptable protocols
STM-16/OC-48, OTN-1
Gigabit Ethernet
STM-4/OC-12, ESCON
STM-1/OC-3, FDDI
*Optional Bandwidth: 2.125Gbps and 1.062Gbps bandwidth can be selected by the internal setting.
9. Transceiver pin allocation
No. Symbol
1 TX GND
2 TX_FAULT
3 TX_DISABLE
4 MOD_DEF[2]
5 MOD_DEF[1]
6 MOD_DEF[0]
7 Rate Select 0
8 RX_LOS
9 Rate Select 1
10 RX GND
Description
Transmitter Ground
Transmitter Fault Indication
Transmitter Disable
Module Definition 2
Module Definition 1
Module Definition 0
Rate Select pin 0
Loss of Signal
Rate Select pin 1
Receiver Ground
No. Symbol
11 RX GND
12 RD-
13 RD+
14 RX GND
15 RX Vcc
16 TX Vcc
17 TX GND
18 TD+
19 TD-
20 TX GND
Description
Receiver Ground
Receiver Data Output-Bar
Receiver Data Output
Receiver Ground
Receiver Power Supply
Transmitter Power Supply
Transmitter Ground
Transmitter Data in
Transmitter Data in-Bar
Transmitter Ground
UQ9-06-006 Ed:1.0 Date:10.Oct.2006
Page 5 of 14
5 Page 
MITSUBISHI (OPTICAL DEVICES)
MF-2500FXD Series
2.5Gbps SFP TRANSCEIVER MODULE
10. Type Number
–5 to +85°Ca) Operating Case Temperature:
(Extended Temperature) Version
MF–2500FXD–M41ZB
–40 to +85°Cb) Operating Case Temperature:
(Industrial Temperature) Version
MF–2500FXD–M41ZC
11. Implemented Digital Diagnostic Monitoring options
RATE SELECT (7 & 9 pin : refer to Section 8. Selective Bandwidth filtering function)
TX_DISABLE (3pin)
TX_FAULT (2pin)
Los Of Signal (8pin)
Alarm/warning flags
Soft TX_DISABLE control and monitoring
Soft TX_FAULT monitoring
Soft RX_LOS monitoring
12. Reliability reference
Telcordia GR-468-CORE
Radiated Emission:IEC61000-6-3
Immunity:IEC61000-4-2,IEC61000-4-3
Flammability:UL94V-0
ESD for PIN Interface:500V by Human body model (with Rd=1500ohm and Cd=100pF)
13. Laser Safety Information
Class 1 Laser Products (IEC60825 and CDRH compliant)
UQ9-06-006 Ed:1.0 Date:10.Oct.2006
Page 11 of 14
11 Page | ||
| Páginas | Total 14 Páginas | |
| PDF Descargar | [ Datasheet MF-2500FXD.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MF-2500FXD | 2.5Gbps SFP TRANSCEIVER MODULE | Mitsubishi Electric |
| MF-2500FXE | 2.5Gbps SFP TRANSCEIVER MODULE | Mitsubishi Electric |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |