Datenblatt-pdf.com


XP1020-QE Schematic ( PDF Datasheet ) - Mimix Broadband

Teilenummer XP1020-QE
Beschreibung GaAs MMIC Power Amplifier
Hersteller Mimix Broadband
Logo Mimix Broadband Logo 




Gesamt 6 Seiten
XP1020-QE Datasheet, Funktion
11.0-19.0 GHz GaAs MMIC
Power Amplifier, QFN
January 2007 - Rev 26-Jan-07
Features
17.0 dB Small Signal Gain
+27.0 dBm Saturated Output Power
SMD, 3x3 mm QFN Package
RoHS Compliant
100% RF, DC and Output Power Testing
P1020-QE
General Description
Mimix Broadband’s two stage 11.0-19.0 GHz GaAs
MMIC power amplifier has a small signal gain of
17.0 dB with a +27.0 dBm saturated output power.
This MMIC uses Mimix Broadband’s 0.15 µm GaAs
PHEMT device model technology, and is based upon
electron beam lithography to ensure high
repeatability and uniformity.The device comes in a
3x3mm QFN Surface Mount Package offering
excellent RF and thermal properties and is RoHS
compliant.This device is well suited for
www.DataSheet4U.com
Millimeter-wave Point-to-Point Radio, LMDS, SATCOM
and VSAT applications.
Absolute Maximum Ratings
Supply Voltage (Vd)
Supply Current (Id)
Gate Bias Voltage (Vg)
Input Power (Pin)
Storage Temperature (Tstg)
Operating Temperature (Ta)
Channel Temperature (Tch)
+9.0 VDC
500 mA
+0.3 VDC
+17.0 dBm
-65 to +165 OC
-55 to MTTF Table1
MTTF Table1
(1) Channel temperature affects a device's MTTF. It is
recommended to keep channel temperature as low as
possible for maximum life.
Electrical Characteristics (Ambient Temperature T = 25 oC)
Parameter
Frequency Range (f )
Input Return Loss (S11)
Output Return Loss (S22)
Small Signal Gain (S21)
Gain Flatness ( S21)
Reverse Isolation (S12)
Saturated Output Power (Psat)
Drain Bias Voltage (Vd)
Gate Bias Voltage (Vg)
Supply Current (Id) (Vd=5.0V, Vg=-0.9V Typical)
Units Min. Typ. Max.
GHz 11.0 - 19.0
dB - 12.0 -
dB - 8.0 -
dB - 17.0 -
dB - +/-1.0 -
dB - 40.0 -
dBm - +27.0 -
VDC - +5.0 +8.0
VDC -1.0 -0.9 0.0
mA - 380 420
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 6
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.






XP1020-QE Datasheet, Funktion
11.0-19.0 GHz GaAs MMIC
Power Amplifier, QFN
January 2007 - Rev 26-Jan-07
P1020-QE
Handling and Assembly Information
CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human body and the
environment. For safety, observe the following procedures:
Do not ingest.
Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these
by-products are dangerous to the human body if inhaled, ingested, or swallowed.
Observe government laws and company regulations when discarding this product.This product must be discarded in
accordance with methods specified by applicable hazardous waste procedures.
Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support devices or
systems without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life
support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain
life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury to the user. (2) A critical component is any component of a life support device or
system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its
safety or effectiveness.
Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package compatible
with high volume solder installation. Vacuum tools or other suitable pick and place equipment may be used to pick and place this
part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF, DC and ground
connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation, but reduced reliability and
life of the product due to thermal stress.
Typical Reflow Profiles
Reflow Profile
Ramp Up Rate
Activation Time and Temperature
Time Above Melting Point
Max Peak Temperature
Time Within 5 ºC of Peak
Ramp Down Rate
SnPb
3-4 ºC/sec
60-120 sec @ 140-160 ºC
60-150 sec
240 ºC
10-20 sec
4-6 ºC/sec
Pb Free
3-4 ºC/sec
60-180 sec @ 170-200 ºC
60-150 sec
265 ºC
10-20 sec
4-6 ºC/sec
Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental
requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix RoHS compliant
components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of our RoHS compliant parts is
100% matt tin (Sn) over copper alloy and is backwards compatible with current standard SnPb low-temperature reflow processes as
well as higher temperature (260°C reflow) “Pb Free” processes.
Part Number for Ordering
XP1020-QE-0N00
XP1020-QE-EV1
Description
Gold plated RoHS compliant 3x3 16L QFN surface mount package in bulk quantity
XP1020-QE evaluation board
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 6 of 6
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.

6 Page







SeitenGesamt 6 Seiten
PDF Download[ XP1020-QE Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
XP1020-QEGaAs MMIC Power AmplifierMimix Broadband
Mimix Broadband

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche