Datenblatt-pdf.com


XM1000 Schematic ( PDF Datasheet ) - Mimix Broadband

Teilenummer XM1000
Beschreibung GaAs MMIC Balanced Mixer
Hersteller Mimix Broadband
Logo Mimix Broadband Logo 




Gesamt 6 Seiten
XM1000 Datasheet, Funktion
32.0-46.0 GHz GaAs MMIC
Balanced Mixer
November 2005 - Rev 21-Nov-05
Features
Fundamental Balanced Mixer
7.0 dB Conversion Loss
+24 dBm Input Third Order Intercept
100% On-Wafer RF Testing
100% Visual Inspection to MIL-STD-883
Method 2010
Chip Device Layout
M1000
General Description
Mimix Broadbands 32.0-46.0 GHz GaAs MMIC
fundamental balanced mixer has been optimized for use
as a down-converter.The device has a conversion loss of
7.0 dB with a +24.0 dBm input third order intercept point.
This MMIC uses Mimix Broadbands 0.15 µm GaAs PHEMT
device model technology, and is based upon electron
beam lithography to ensure high repeatability and
uniformity.The chip has surface passivation to protect
and provide a rugged part with backside via holes and
gold metallization to allow either a conductive epoxy or
www.DataSheet4U.com eutectic solder die attach process. This device is well
suited for Millimeter-wave Point-to-Point Radio, LMDS,
SATCOM and VSAT applications.
Absolute Maximum Ratings
Gate Bias Voltage (Vg)
Input Power (RF Pin)
Storage Temperature (Tstg)
Operating Temperature (Ta)
+0.3 VDC
+20.0 dBm
-65 to +165 OC
-55 to +125 OC
o
Electrical Characteristics (Ambient Temperature T = 25 C)
Parameter
Units Min. Typ. Max.
Frequency Range (RF) Upper Sideband
GHz 32.0 - 46.0
Frequency Range (RF) Lower Sideband
GHZ 33.0 - 44.0
Frequency Range (LO)
GHz 29.0 - 47.0
Frequency Range (IF)
GHz DC - 3.0
RF Return Loss (S11)
dB - 15.0 -
IF Return Loss (S22)
dB - 10.0 -
LO Return Loss (S33)
dB - 20.0 -
Conversion Loss (S21)
dB - 7.0 -
LO Input Drive (PLO)
dBm - +15.0 -
Isolation LO/RF
dB - TBD -
Isolation LO/IF
dB - TBD -
Isolation RF/IF
dB - TBD -
Input Third Order Intercept (IIP3)
dBm - +24.0 -
Gate Bias Voltage (Vg1)
VDC -2.0 -0.6 +0.1
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 6
Characteristic Data and Specifications are subject to change without notice. ©2005 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.






XM1000 Datasheet, Funktion
32.0-46.0 GHz GaAs MMIC
Balanced Mixer
November 2005 - Rev 21-Nov-05
M1000
Handling and Assembly Information
CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the
human body and the environment. For safety, observe the following procedures:
Do not ingest.
Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical
processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed.
Observe government laws and company regulations when discarding this product.This product must be
discarded in accordance with methods specified by applicable hazardous waste procedures.
Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support
devices or systems without the express written approval of the President and General Counsel of Mimix
Broadband. As used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for
surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in
accordance with instructions for use provided in the labeling, can be reasonably expected to result in a
significant injury to the user. (2) A critical component is any component of a life support device or system whose
failure to perform can be reasonably expected to cause the failure of the life support device or system, or to
affect its safety or effectiveness.
ESD - Gallium Arsenide (GaAs) devices are susceptible to electrostatic and mechanical damage. Die are supplied
in antistatic containers, which should be opened in cleanroom conditions at an appropriately grounded anti-
static workstation. Devices need careful handling using correctly designed collets, vacuum pickups or, with care,
sharp tweezers.
Die Attachment - GaAs Products from Mimix Broadband are 0.100 mm (0.004") thick and have vias through to the
backside to enable grounding to the circuit. Microstrip substrates should be brought as close to the die as
possible.The mounting surface should be clean and flat. If using conductive epoxy, recommended epoxies are
Ablestick 84-1LMI or 84-1LMIT cured in a nitrogen atmosphere per manufacturer's cure schedule. Apply epoxy
sparingly to avoid getting any on to the top surface of the die. An epoxy fillet should be visible around the total
die periphery. If eutectic mounting is preferred, then a fluxless gold-tin (AuSn) preform, approximately 0.0012
thick, placed between the die and the attachment surface should be used. A die bonder that utilizes a heated
collet and provides scrubbing action to ensure total wetting to prevent void formation in a nitrogen atmosphere
is recommended.The gold-tin eutectic (80% Au 20% Sn) has a melting point of approximately 280 C (Note: Gold
Germanium should be avoided).The work station temperature should be 310 C+- 10 C. Exposure to these
extreme temperatures should be kept to minimum.The collet should be heated, and the die pre-heated to avoid
excessive thermal shock. Avoidance of air bridges and force impact are critical during placement.
Wire Bonding - Windows in the surface passivation above the bond pads are provided to allow wire bonding to
the die's gold bond pads.The recommended wire bonding procedure uses 0.076 mm x 0.013 mm (0.003" x
0.0005") 99.99% pure gold ribbon with 0.5-2% elongation to minimize RF port bond inductance. Gold 0.025 mm
(0.001") diameter wedge or ball bonds are acceptable for DC Bias connections. Aluminum wire should be
avoided.Thermo-compression bonding is recommended though thermosonic bonding may be used providing
the ultrasonic content of the bond is minimized. Bond force, time and ultrasonics are all critical parameters.
Bonds should be made from the bond pads on the die to the package or substrate. All bonds should be as short
as possible.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 6 of 6
Characteristic Data and Specifications are subject to change without notice. ©2005 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.

6 Page







SeitenGesamt 6 Seiten
PDF Download[ XM1000 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
XM1000GaAs MMIC Balanced MixerMimix Broadband
Mimix Broadband
XM1001GaAs MMIC Image Reject MixerMimix Broadband
Mimix Broadband
XM1001-BDImage Reject MixerMA-COM
MA-COM
XM1001-QHGaAs MMIC Image Reject MixerMimix Broadband
Mimix Broadband
XM1002GaAs MMIC Image Reject MixerMimix Broadband
Mimix Broadband

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche