|
|
Número de pieza | ISL2100A | |
Descripción | (ISL2100A / ISL2101A) High Frequency Half-Bridge Drivers | |
Fabricantes | Intersil Corporation | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de ISL2100A (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
No Preview Available ! ®
Data Sheet
ISL2100A, ISL2101A
June 8, 2006
FN6294.0
100V, 2A Peak, High Frequency
Half-Bridge Drivers
The ISL2100A, ISL2101A are 100V, high frequency,
half-bridge N-channel power MOSFET driver ICs. They are
based on the popular HIP2100, HIP2101 half-bridge drivers,
but offer several performance improvements. The ISL2100A
has additional input hysteresis for superior operation in noisy
environments and the inputs of the ISL2101A, like those of
the ISL2100A, can now safely swing to the VDD supply rail.
Finally, both parts are available in a very compact 9 Ld DFN
package to minimize the required PCB footprint.
Ordering Information
PART
NUMBER
(Notes 1, 2)
PART
TEMP.
MARKING RANGE (°C)
PACKAGE
(Pb-Free)
PKG.
DWG. #
ISL2100AAR3Z 00AZ
-40 to 125 9 Ld 3x3 DFN L9.3x3
ISL2101AAR3Z 01AZ
-40 to 125 9 Ld 3x3 DFN L9.3x3
NOTES:
1. Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and
100% matte tin plate termination finish, which are RoHS
www.DataSheet4U.com compliant and compatible with both SnPb and Pb-free soldering
operations. Intersil Pb-free products are MSL classified at
Pb-free peak reflow temperatures that meet or exceed the
Pb-free requirements of IPC/JEDEC J STD-020.
2. Add “-T” suffix for Tape and Reel packing option.
Pinouts
ISL2100A, ISL2101A (DFN)
TOP VIEW
VDD 1
HB 2
HO 3
HS 4
EPAD
9 LO
8 VSS
7 LI
6 HI
5 NC
NOTE: EPAD = Exposed PAD.
Features
• Drives N-Channel MOSFET Half-Bridge
• Space-Saving DFN Package
• DFN Package Compliant with 100V Conductor Spacing
Guidelines per IPC-2221
• Pb-Free Plus Anneal Available (RoHS Compliant)
• Bootstrap Supply Max Voltage to 114VDC
• On-Chip 1Ω Bootstrap Diode
• Fast Propagation Times for Multi-MHz Circuits
• Drives 1nF Load with Typical Rise/Fall Times of 10ns
• CMOS Compatible Input Thresholds (ISL2100A)
• 3.3V/TTL Compatible Input Thresholds (ISL2101A)
• Independent Inputs Provide Flexibility
• No Start-Up Problems
• Outputs Unaffected by Supply Glitches, HS Ringing Below
Ground or HS Slewing at High dv/dt
• Low Power Consumption
• Wide Supply Voltage Range (9V to 14V)
• Supply Undervoltage Protection
• 2.5Ω Typical Output Pull-Up/Pull-Down Resistance
Applications
• Telecom Half-Bridge Converters
• Telecom Full-Bridge Converters
• Two-Switch Forward Converters
• Active-Clamp Forward Converters
• Class-D Audio Amplifiers
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2006. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.
1 page ISL2100A, ISL2101A
Electrical Specifications
PARAMETERS
BOOT STRAP DIODE
Low Current Forward Voltage
High Current Forward Voltage
Dynamic Resistance
LO GATE DRIVER
Low Level Output Voltage
High Level Output Voltage
Peak Pull-Up Current
Peak Pull-Down Current
HO GATE DRIVER
Low Level Output Voltage
High Level Output Voltage
Peak Pull-Up Current
Peak Pull-Down Current
VDD = VHB = 12V, VSS = VHS = 0V, No Load on LO or HO, Unless Otherwise Specified (Continued)
TJ = 25°C
TJ = -40°C to
125°C
SYMBOL
TEST CONDITIONS
MIN TYP MAX MIN MAX UNITS
VDL
VDH
RD
IVDD-HB = 100µA
IVDD-HB = 100mA
IVDD-HB = 100mA
VOLL
VOHL
IOHL
IOLL
ILO = 100mA
ILO = -100mA, VOHL = VDD - VLO
VLO = 0V
VLO = 12V
VOLH
VOHH
IOHH
IOLH
IHO = 100mA
IHO = -100mA, VOHH = VHB - VHO
VHO = 0V
VHO = 12V
- 0.5 0.6 - 0.7 V
- 0.7 0.9 - 1 V
- 0.8 1
- 1.5 Ω
- 0.25 0.3 - 0.4 V
- 0.25 0.3 - 0.4 V
-2- - - A
-2- - - A
- 0.25 0.3 - 0.4 V
- 0.25 0.3 - 0.4 V
-2- - - A
-2- - - A
Switching Specifications VDD = VHB = 12V, VSS = VHS = 0V, No Load on LO or HO, Unless Otherwise Specified
PARAMETERS
SYMBOL
TEST
CONDITIONS
TJ = 25°C
MIN TYP MAX
TJ = -40°C
to 125°C
MIN MAX UNITS
Lower Turn-Off Propagation Delay (LI Falling to LO Falling)
Upper Turn-Off Propagation Delay (HI Falling to HO Falling)
Lower Turn-On Propagation Delay (LI Rising to LO Rising)
Upper Turn-On Propagation Delay (HI Rising to HO Rising)
Delay Matching: Upper Turn-Off to Lower Turn-On
Delay Matching: Lower Turn-Off to Upper Turn-On
Either Output Rise/Fall Time (10% to 90%/90% to 10%)
Either Output Rise/Fall Time (3V to 9V/9V to 3V)
Minimum Input Pulse Width that Changes the Output
Bootstrap Diode Turn-On or Turn-Off Time
tLPHL
tHPHL
tLPLH
tHPLH
tMON
tMOFF
tRC,tFC
tR,tF
tPW
tBS
CL = 1nF
CL = 0.1µF
- 34 50 - 60 ns
- 31 50 - 60 ns
- 39 50 - 60 ns
- 39 50 - 60 ns
1 8 - - 16 ns
1 6 - - 16 ns
- 10 - - - ns
- 0.5 0.6 - 0.8 us
- - - - 50 ns
- 10 - - - ns
5 FN6294.0
June 8, 2006
5 Page |
Páginas | Total 10 Páginas | |
PDF Descargar | [ Datasheet ISL2100A.PDF ] |
Número de pieza | Descripción | Fabricantes |
ISL21007 | Low Noise Voltage References | Intersil Corporation |
ISL21009 | Low Noise Voltage References | Intersil Corporation |
ISL21009MEP | High Voltage Input Precision Low Noise FGA Voltage References | Intersil Corporation |
ISL2100A | (ISL2100A / ISL2101A) High Frequency Half-Bridge Drivers | Intersil Corporation |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |