Datenblatt-pdf.com


ISL1535 Schematic ( PDF Datasheet ) - Intersil Corporation

Teilenummer ISL1535
Beschreibung Dual Channel Central Office ADSL2 Line Driver
Hersteller Intersil Corporation
Logo Intersil Corporation Logo 




Gesamt 2 Seiten
ISL1535 Datasheet, Funktion
®
Data Sheet
April 3, 2007
ISL1535
FN6226.0
Dual Channel Central Office ADSL2+ Line
Driver
The ISL1535 is a very low power dual channel differentiated
amplifier designed for central office line driving for DMT
ADSL2+ solutions. This device features a high drive
capability of 600mA while consuming 5.2mA of supply
current per amplifier from ±12V supplies. This driver
achieves a typical distortion of less than -75dBc, at 1MHz
into a 50Ω load. The ISL1535 is available in 28 Ld HTSSOP
package. This device is specified for operation over the full
-40°C to +85°C temperature range.
The ISL1535 has two control pins, C0 and C1, per channel.
With the selection of C0 and C1, the device can be set into
full-IS power, 3/4-IS power, 1/2-IS power, and power-down
disable modes. The ISL1535 maintains excellent distortion
and load driving capabilities even in the lowest power
settings. The ISL1535 has extended bandwidth, low THD
and high slew rate for ADSL2+ applications.
Ordering Information
www.DataSheet4U.com
PART
NUMBER
(Note)
PART
MARKING
TAPE
&
REEL
PACKAGE
(Pb-free)
PKG.
DWG. #
ISL1535IVEZ
ISL1535 IVEZ - 28 Ld HTSSOP MDP0048
ISL1535IVEZ-T13 ISL1535 IVEZ 13” 28 Ld HTSSOP MDP0048
ISL1535IRZ
1535 IRZ
- 24 Ld QFN
MDP0046
ISL1535IRZ-T13 1535 IRZ
13” 24 Ld QFN
MDP0046
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100% matte
tin plate termination finish, which are RoHS compliant and compatible
with both SnPb and Pb-free soldering operations. Intersil Pb-free
products are MSL classified at Pb-free peak reflow temperatures that
meet or exceed the Pb-free ruirements of IPC/JEDEC J STD-020.
Features
• Drives 400mA at 16VP-P on ±12V supplies
• 21.4VP-P differential output drive into 100Ω
• 20.6VP-P minimum differential output drive into 60Ω
• -75dBc typical driver output distortion driving 50Ω at 1MHz
and 1/2-IS bias current
• Quiescent current of 5.2mA per amplifier in 1/2-IS mode
• 100MHz BW at AV = 10
• Current control pins to select power modes
• Pin-to-pin replacement for EL1527 and EL1537
• Pb-free plus anneal available (RoHS compliant)
Applications
• ADSL, ADSL2, ADSL2+ line drivers
• G.SHDSL, HDSL2 line drivers
• VDSL line drivers
• Video distribution amplifiers
• Video twisted-pair line drivers
Get Full Datasheet
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2007. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.





SeitenGesamt 2 Seiten
PDF Download[ ISL1535 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
ISL1532Dual Channel Differential DSL Line DriverIntersil Corporation
Intersil Corporation
ISL1532ADual Channel Fixed Gain Differential DSL Line DriverIntersil Corporation
Intersil Corporation
ISL1533Dual Channel Differential DSL Line DriverIntersil Corporation
Intersil Corporation
ISL1534Dual Channel Fixed Gain Differential DSL Line DriverIntersil Corporation
Intersil Corporation
ISL1535Dual Channel Central Office ADSL2 Line DriverIntersil Corporation
Intersil Corporation

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche