Datenblatt-pdf.com


UG10ACT Schematic ( PDF Datasheet ) - General Semiconductor

Teilenummer UG10ACT
Beschreibung (UG10xCT) ULTRAFAST SOFT RECOVERY RECTIFIER
Hersteller General Semiconductor
Logo General Semiconductor Logo 




Gesamt 2 Seiten
UG10ACT Datasheet, Funktion
NEW PRODUCT
NEW PRODUCT
NEW PRODUCT
UG10ACT THRU UG10DCT
ULTRAFAST SOFT RECOVERY RECTIFIER
Reverse Voltage - 200 Volts Forward Current - 10.0 Amperes
0.160 (4.06)
0.140 (3.56)
TO-220AB
0.415 (10.54) MAX.
0.370 (9.40)
0.360 (9.14)
0.154 (3.91)
DIA.
0.148 (3.74)
0.113 (2.87)
0.103 (2.62)
0.145 (3.68)
0.135 (3.43)
0.410 (10.41)
0.390 (9.91)
PIN
1 23
0.635 (16.13)
0.625 (15.87)
0.350 (8.89)
0.330 (8.38)
1.148 (29.16)
1.118 (28.40)
0.560 (14.22)
0.530 (13.46)
0.105 (2.67)
0.095 (2.41)
0.037 (0.94)
0.027 (0.68)
0.105 (2.67)
0.095 (2.41)
0.205 (5.20)
0.195 (4.95)
0.022 (0.56)
0.014 (0.35)
PIN 1
PIN 3
Dimensions in inches and (millimeters)
0.185 (4.70)
0.175 (4.44)
0.055 (1.39)
0.045 (1.14)
0.560 (14.22)
0.530 (13.46)
0.110 (2.79)
0.100 (2.54)
PIN 2
CASE
FEATURES
Plastic package has Underwriters Laboratories
Flammability Classification 94V-0
Ideally suited for free wheeling diode power factor
correction applications
Soft recovery characteristics
Excellent high temperature switching
Optimized to reduce switching losses
High temperature soldering guaranteed:
250°C/10 seconds at terminals
Glass passivated chip junction
MECHANICAL DATA
Case: JEDEC TO-220AB molded plastic body
Terminals: Plated leads, solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Mounting Position: Any
Mounting Torque: 5 in. - lbs. max.
Weight: 0.08 ounce, 2.24 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
www.DataSheet4RUa.ctoimngs at 25°C ambient temperature unless otherwise specified.
Maximum repetitive peak reverse voltage
SYMBOLS UG10ACT UG10BCT UG10CCT UG10DCT UNITS
VRRM
50
100 150 200 Volts
Working peak reverse voltage
VRWM
50
100 150 200 Volts
Maximum RMS voltage
VRMS
35
70 105 140 Volts
Maximum DC blocking voltage
VDC 50 100 150 200 Volts
Maximum average forward rectified current at TC=100°C
I(AV) 10 Amps
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method) per leg
IFSM
60 Amps
Maximum instantaneous forward voltage per leg at IF=10A, TJ=25°C
IF=5A, TJ=25°C
IF=5A, TJ=150°C
VF
1.25
1.10
0.895
Volts
Maximum reverse leakage current per leg
at working peak reverse voltage
TJ=25°C
TJ=100°C
IR
10
200
µA
Maximum reverse recovery time per leg at
IF=1.0A, di/dt=100A/µs, VR=30V, Irr=0.1 IRM
trr 25 ns
Maximum reverse recovery time per leg at
IF=0.5A, IR=1.0A, Irr=0.25A
Maximum
Typical
trr
25
15
ns
Maximum reverse recovery current per leg at
IF=5A, di/dt=50A/µs,VR=30V
IRM 0.7 Amps
Maximum stored charge per leg
IF=2A, di/dt=20A/µs, VR=30V Irr=0.1 IRM
Maximum
Typical
Qrr
5.5
4.5
nC
Typical thermal resistance from junction to case per leg
RΘJC
4.5 °C/W
Operating junction and storage temperature range
TJ, TSTG
-40 to +150
°C
NOTICE: Advanced product information is subject to change without notice
4/98





SeitenGesamt 2 Seiten
PDF Download[ UG10ACT Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
UG10ACT(UG10xCT) ULTRAFAST SOFT RECOVERY RECTIFIERGeneral Semiconductor
General Semiconductor

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche