Datenblatt-pdf.com


IA6008-FB11A Schematic ( PDF Datasheet ) - ROHM Semiconductor

Teilenummer IA6008-FB11A
Beschreibung Color image sensor heads
Hersteller ROHM Semiconductor
Logo ROHM Semiconductor Logo 




Gesamt 6 Seiten
IA6008-FB11A Datasheet, Funktion
Contact image sensor heads
IA6008-FB11A
Color image sensor heads for multi-function
IA6008-FB11A
Flatbed type Color Image Sensor Head, utilizing RGB light source uniquely developed by ROHM.
It utilizes sensor IC with resolution change function, enabling the selection of optical resolution according to the scanning
media.
zApplications
Image sensor heads are designed for multi-function equipment such as facsimiles with color scanner or multiple function
printers.
zFeatures
1) Signal amplifier is built into the image sensor IC in order to increase immunity to external noise.
2) Employing low voltage driving sensor enables 3.3V drive which is identical to the ASIC.
3) The LED light source is mounted on the same substrate as the sensor chip which allows packaging of the device with
lighter weight and smaller size.
4) With the proprietary prism, the output signal is maintained uniformly.
5) The ceramic substrate is used for excellent dimensional accuracy and thermal stability.
zExternal dimensions (Unit : mm)
2-φ1.5×2
Oval Hole D4MIN
2±0.2
Scanning line
1.5
236±0.5
(232)
216
Effective 1st bit
5
+0.1
2-0.3
12.4±0.5
9.4
0.724±0.1
2-φ1.5 D4MIN
3
16 2-R0.5
+0.2
45-0
219.2±0.3
219.2±0.3
Pin No.
No.1
No.2
No.3
No.4
No.5
No.6
Signal
Ao
MODE
GND
VDD
VREF
SP
Pin No.
No.7
No.8
No.9
No.10
No.11
No.12
Signal
CLK
V-LED
B-GND
G-GND
R-GND
NC
15 3.8
+0.2
45-0
2-C0.3
2-C0.3
4.72
6.496
7.22
MAX.3.15
(9.8)
13.8
1/5






IA6008-FB11A Datasheet, Funktion
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level of
reliability and the malfunction of with would directly endanger human life (such as medical instruments,
transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other
safety devices), please be sure to consult with our sales representative in advance.
About Export Control Order in Japan
Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control
Order in Japan.
In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)
on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.1

6 Page







SeitenGesamt 6 Seiten
PDF Download[ IA6008-FB11A Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
IA6008-FB11AColor image sensor headsROHM Semiconductor
ROHM Semiconductor

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche