WM8195 Datasheet PDF - Wolfson Microelectronics
| Part Number | WM8195 | |
| Description | 14-bit 12MSPS CIS/CCD Analogue Front End/Digitiser | |
| Manufacturers | Wolfson Microelectronics | |
| Logo |  |
|
|
There is a preview and WM8195 download ( pdf file ) link at the bottom of this page. Total 30 Pages | ||
Preview 1 page No Preview Available !
w
WM8195
14-bit 12MSPS CIS/CCD Analogue Front End/Digitiser
DESCRIPTION
FEATURES
The WM8195 is a 14-bit analogue front end/digitiser IC
which processes and digitises the analogue output signals
from CCD sensors or Contact Image Sensors (CIS) at pixel
sample rates of up to 12MSPS.
The device includes three analogue signal processing
channels each of which contains Reset Level Clamping,
Correlated Double Sampling and Programmable Gain and
Offset Adjust functions. Three multiplexers allow single
channel processing. The output from each of these
channels is time multiplexed into a single high-speed 14-bit
analogue-to-digital converter. The digital output data is
available in 14-bit parallel or 8, 7 or 4-bit wide multiplexed
format, with no missing codes.
• 14-bit ADC
• No missing codes guaranteed
• 12MSPS conversion rate
• Low power – 210mW typical
• 5V single supply or 5V/3.3V dual supply operation
• Single or 3 channel operation
• Correlated double sampling
• Programmable gain (8-bit resolution)
• Programmable offset adjust (8-bit resolution)
• Programmable clamp voltage
• 14-bit parallel or 8, 7 or 4-bit wide multiplexed data output
formats
• Internally generated voltage references
• 48-lead TQFP package
An internal 4-bit DAC is supplied for internal reference level
• Serial or parallel control interface
generation. This may be used during CDS to reference CIS
signals or during Reset Level Clamping to clamp CCD
APPLICATIONS
signals. Alternatively an external reference level may be
applied. ADC references are generated internally, ensuring
optimum performance from the device.
• Flatbed and sheetfeed scanners
• USB compatible scanners
• Multi-function peripherals
Using an analogue supply voltage of 5V and a digital
• High-performance CCD sensor interface
interface supply of either 5V or 3.3V, the WM8195 typically
only consumes 210mW when operating from a single 5V
www.DataSheet4U.com
supply and less than 20µA when in power down mode.
BLOCK DIAGRAM
VRLC/VBIAS
CL
RINP
RLC
GINP
RLC
VSMP MCLK
AVDD1-2
DVDD1-3
RS VS
M
U
X
TIMING CONTROL
w
WM8195
CDS
RM
GU
X
B
8
OFFSET
DAC
VREF/BIAS
+ PGA
RM
GU
X
B
I/P SIGNAL
8 POLARITY
ADJUST
CDS
+ PGA
8 OFFSET
DAC
8 I/P SIGNAL
POLARITY
ADJUST
VRT VRX VRB
+
M
+U
X
14-
BIT
ADC
DATA
I/O
PORT
BINP
RLC
RLC
DAC 4
CDS
+ PGA
+
8 OFFSET
DAC
8 I/P SIGNAL
POLARITY
ADJUST
CONFIGURABLE
SERIAL/
PARALLEL
CONTROL
INTERFACE
OEB
OP[0]
OP[1]
OP[2]
OP[3]
OP[4]
OP[5]
OP[6]
OP[7]
OP[8]
OP[9]
OP[10]
OP[11]
OP[12]
OP[13]/SDO
SEN/STB
SCK/RNW
SDI/DNA
RLC/ACYC
NRESET
AGND1-6
DGND1-5
WOLFSON MICROELECTRONICS plc
To receive regular email updates, sign up at http://www.wolfsonmicro.com/enews/
Production Data July 2005 Rev 4.1
Copyright 2005 Wolfson Microelectronics plc.
|
| |
 
Production Data
WM8195
PIN NAME
TYPE
DESCRIPTION
31 OP[7]
Digital I/O
See pins 21 to 23 for details.
32 OP[8]
Digital I/O
33 OP[9]
Digital I/O
34 OP[10]
Digital I/O
35 DVDD3
Supply
Digital I/O supply (3.3V/5V).
36 DGND4
Supply
Digital ground (0V).
37 OP[11]
Digital I/O
See pins 21 to 23 for details.
38 OP[12]
39 OP[13]/SDO
Digital I/O
Digital I/O
If the device has been configured to use the serial interface, pin OP[13]/SDO may
be used to output register read-back data when OEB = 0 and SEN has been
pulsed high.
See Serial Interface sections in Device Description for further details.
40 DGND5
Supply
Digital ground (0V).
41 NC
No connection.
42
NRESET
Digital input Reset input, active low. This signal forces a reset of all internal registers and selects
whether the serial or parallel control interface is used. See pin SEN/STB.
43 AVDD1
Supply
Analogue supply (5V).
44 AVDD2
Supply
Analogue supply (5V).
45 AGND5
Supply
Analogue ground (0V).
46 AGND6
Supply
Analogue ground (0V).
47
VRB
Analogue output Lower reference voltage. This pin must be capacitively decoupled to AGND.
48
VRT
Analogue output Lower reference voltage. This pin must be capacitively decoupled to AGND.
w
PD Rev 4.1 July 2005
5
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for WM8195 electronic component. |
| Information | Total 30 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ WM8195.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| WM8190 | The function is (8+6) Bit Output 14-bit CIS/CCD AFE/Digitiser. Wolfson Microelectronics plc |  |
| WM8191 | The function is 14-bit 6MSPS CIS/CCD Analogue Front End/Digitiser. Wolfson Microelectronics plc | |
| WM8192 | The function is (8+8) Bit Output 16-bit CIS/CCD AFE/Digitiser. Wolfson Microelectronics plc | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
WM81
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||