|
|
Número de pieza | HS-6253 | |
Descripción | VIA C3 800MHz Embedded CPU Industrial Single Board Computer | |
Fabricantes | BOSER Technology | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de HS-6253 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
No Preview Available ! www.DataSheet4U.com
HS-6253
VIA C3 800MHz Embedded CPU
Industrial Single Board Computer
•Half Size•All-in-One•CRT/Panel•133MHz FSB•
•ATA/33/66/100•Dual LAN•Audio•
•RS-232/422/485•4COM•PC/104•
•IrDA•USB•DOC•WDT•H/W Monitor•
•PCI-ISA Bus Industrial Single Board computer•
1 page Safety Instructions
Integrated circuits on computer boards are sensitive to static electricity. To
avoid damaging chips from electrostatic discharge, observe the following
precautions:
Do not remove boards or integrated circuits from their anti-static packaging
until you are ready to install them.
Before handling a board or integrated circuit, touch an unpainted portion of
the system unit chassis for a few seconds. This helps to discharge any static
electricity on your body.
Wear a wrist-grounding strap, available from most electronic component
stores, when handling boards and components. Fasten the ALLIGATOR clip
of the strap to the end of the shielded wire lead from a grounded object.
Please wear and connect the strap before handle the HS-6253 to ensure
harmlessly discharge any static electricity through the strap.
Please use an anti-static pad when putting down any components or parts or
tools outside the computer. You may also use an anti-static bag instead of
the pad. Please inquire from your local supplier for additional assistance in
finding the necessary anti-static gadgets.
NOTE: DO NOT TOUCH THE BOARD OR ANY OTHER SENSITIVE
COMPONENTS WITHOUT ALL NECESSARY ANTI-STATIC
PROTECTION.
5 Page Chapter 2
Unpacking
2.1 Opening the Delivery Package
The HS-6253 is packed in an anti-static bag. The board has
components that are easily damaged by static electricity. Do not
remove the anti-static wrapping until proper precautions have been
taken. Safety Instructions in front of this manual describe anti-static
precautions and procedures.
2.2 Inspection
After unpacking the board, place it on a raised surface and carefully
inspect the board for any damage that might have occurred during
shipment. Ground the board and exercise extreme care to prevent
damage to the board from static electricity.
Integrated circuits will sometimes come out of their sockets during
shipment. Examine all integrated circuits, particularly the BIOS,
processor, memory modules, ROM-Disk, and keyboard controller chip
to ensure that they are firmly seated. The HS-6253 delivery package
contains the following items:
HS-6253 Board x 1
Utility CD Disk x 1
ATA/100 IDE flat cable x 1
FDD flat cable x 1
Printer cable with bracket x 1
RS-232 COM Port cables with bracket x 2
8-pin USB split type cable with bracket x 1
MIC/Audio 8-pin cable + 2 phone jacks x 1
Jumper Bag x 1
User’s Manual
5
11 Page |
Páginas | Total 30 Páginas | |
PDF Descargar | [ Datasheet HS-6253.PDF ] |
Número de pieza | Descripción | Fabricantes |
HS-6252 | 800 MHZ EMBEDDED CPU PCI ISA BUS SBC WITH VGA/ AUDIO DUAL LAN | ETC |
HS-6253 | 800MHz Embedded CPU PCI-ISA Bus SBC | ETC |
HS-6253 | VIA C3 800MHz Embedded CPU Industrial Single Board Computer | BOSER Technology |
HS-6253LV | 800MHz Embedded CPU PCI-ISA Bus SBC | ETC |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |