|
|
Número de pieza | MHP100 | |
Descripción | 100W TO-247 HIGH POWER RESISTORS | |
Fabricantes | TT | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de MHP100 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! www.DataSheet4U.com
100W TO-247 HIGH POWER RESISTORS
Features………………………………………………………….
Non-inductive, high power resistor.
Thermally enhanced Industry standard TO-247 package.
Extremely Low thermal resistance, 1.3 °C/W resistor hot spot to metal tab.
Complete thermal flow design available for easy implementation.
Superior vibration durability.
Small thin package for high density PCB installation.
RoHS compliant.
Applications………………………………………………………
High frequency circuits and wide band / linear amplifiers.
Switch mode and industrial RF power sources.
AC motor control, electronic load and drive circuits.
Automotive.
Industrial PC modules (IPM) and measurement systems.
RF circuit terminations.
Constant current and precision voltage sources
Specification
Dimensions (mm)
MHP 140
100F
5.1
4.8
16.0 3+/-0.3
dia.0.8
dia.3.2
20
10.9 20
Structure and Material
Epoxy Molding
Copper Wire Leads
Conductor
Resistor Film
Alumina
Copper Plate
Items
Specification
Conditions
Power Rating
100 Watts
@ Tab Temp < 25°C
Power Rating
Resistance Range
Nominal Resistance Series
0.01-0.09 Ω
E6
3.0 Watts
0.1-9.1 Ω
E12
10-220 Ω
E24
Free air.
Extended resistance range to 51KΩ avail.
2.0 Ω and 5.0 Ω also available.
TCR
250 ppm/°C
100 ppm/°C
50 ppm/°C
For -55 to +155°C
Tolerance
5%
5% and 1%
1%
Operation Temp. Range
-55 - +155 °C
Rated Voltage (Max).
700V or √(P*R)
Dielectric Withstanding Voltage
2500 Volt
60 seconds.
Load Life
∆R +/- (1.0 %+0.05 Ω)
25°C, 90 min. ON, 30 min.OFF, 1000 hours.
Humidity
∆R +/- (1.0 %+0.05 Ω)
40°C, 90-95% RH, DC 0.1W, 1000 hours.
Temperature Cycle
∆R +/- (0.25 %+0.05 Ω)
-55°C, 30 min.,+155°C 30min., 5cycles.
Soldering Heat (Max)
∆R +/- (0.25 %+0.05 Ω)
250+/-5°C, 3 seconds,
Solderability
Min 95% coverage
230+/-5°C, 3 seconds.
Insulation Resistance
Over 1000 MΩ
Between terminals and metal back plate.
Vibration
∆R +/- (0.25 %+0.05 Ω)
Notes:
Specifications subject to change without notice.
1. Electrically isolated metal tab.
2. Recommend the use of thermal grease between metal tab and heat sink.
3. Thermal design should account for a thermal resistance between resistor and tab of 1.3°C/W and a maximum resistor temperature of
155°C.
4. Resistances greater than 220Ω are available, please call factory.
5. For resistances from 220Ω to 51 KΩ the power rating shall be restricted to 50W.
6. Current rating: 25A maximum.
1
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet MHP100.PDF ] |
Número de pieza | Descripción | Fabricantes |
MHP10 | Single and dual output 10 Watt Wide input DC/DC converters | Artesyn Technologies |
MHP100 | 100W TO-247 HIGH POWER RESISTORS | TT |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |