AD2S1205 Datasheet PDF - Analog Devices
| Part Number | AD2S1205 | |
| Description | 12-Bit RDC | |
| Manufacturers | Analog Devices | |
| Logo |  |
|
|
There is a preview and AD2S1205 download ( pdf file ) link at the bottom of this page. Total 20 Pages | ||
Preview 1 page No Preview Available !
FEATURES
Complete monolithic resolver-to-digital converter (RDC)
Parallel and serial 12-bit data ports
System fault detection
±11 arc minutes of accuracy
Input signal range: 3.15 V p-p ± 27%
Absolute position and velocity outputs
1250 rps maximum tracking rate, 12-bit resolution
Incremental encoder emulation (1024 pulses/rev)
Programmable sinusoidal oscillator on board
Single-supply operation (5.00 V ± 5%)
−40°C to +125°C temperature rating
44-lead LQFP
4 kV ESD protection
Qualified for automotive applications
APPLICATIONS
Automotive motion sensing and control
Hybrid-electric vehicles
Electric power steering
Integrated starter generator/alternator
Industrial motor control
Process control
GENERAL DESCRIPTION
The AD2S1205 is a complete 12-bit resolution tracking
resolver-to-digital converter that contains an on-board
programmable sinusoidal oscillator providing sine wave
excitation for resolvers.
The converter accepts 3.15 V p-p ± 27% input signals on the Sin
and Cos inputs. A Type II tracking loop is employed to track the
inputs and convert the input Sin and Cos information into a digital
representation of the input angle and velocity. The maximum
tracking rate is a function of the external clock frequency. The
performance of the AD2S105 is specified across a frequency
range of 8.192 MHz ± 25%, allowing a maximum tracking rate
of 1250 rps.
12-Bit RDC
with Reference Oscillator
AD2S1205
EXCITATION
OUTPUTS
FUNCTIONAL BLOCK DIAGRAM
REFERENCE
PINS
CRYSTAL
AD2S1205
REFERENCE
OSCILLATOR
(DAC)
VOLTAGE
REFERENCE
INTERNAL
CLOCK
GENERATOR
SYNTHETIC
REFERENCE
INPUTS
FROM
RESOLVER
ADC
ADC
TYPE II TRACKING LOOP
FAULT
DETECTION
ENCODER
EMULATION
OUTPUTS
POSITION REGISTER VELOCITY REGISTER
ENCODER
EMULATION
MULTIPLEXER
DATA BUS OUTPUT
FAULT
DETECTION
OUTPUTS
RESET
DATA I/O
Figure 1.
PRODUCT HIGHLIGHTS
1. Ratiometric Tracking Conversion. The Type II tracking
loop provides continuous output position data without
conversion delay. It also provides noise immunity and
tolerance of harmonic distortion on the reference and
input signals.
2. System Fault Detection. A fault detection circuit can sense
loss of resolver signals, out-of-range input signals, input
signal mismatch, or loss of position tracking.
3. Input Signal Range. The Sin and Cos inputs can accept
differential input voltages of 3.15 V p-p ± 27%.
4. Programmable Excitation Frequency. Excitation frequency
is easily programmable to 10 kHz, 12 kHz, 15 kHz, or 20 kHz
by using the frequency select pins (the FS1 and FS2 pins).
5. Triple Format Position Data. Absolute 12-bit angular position
data is accessed via either a 12-bit parallel port or a 3-wire
serial interface. Incremental encoder emulation is in standard
A-quad-B format with direction output available.
6. Digital Velocity Output. 12-bit signed digital velocity accessed
via either a 12-bit parallel port or a 3-wire serial interface.
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©2007–2010 Analog Devices, Inc. All rights reserved.
|
| |
 
ABSOLUTE MAXIMUM RATINGS
Table 2.
Parameter
Supply Voltage (VDD)
Supply Voltage (AVDD)
Input Voltage
Output Voltage Swing
Input Current to Any Pin Except Supplies1
Operating Temperature Range (Ambient)
Storage Temperature Range
Rating
−0.3 V to +7.0 V
−0.3 V to +7.0 V
−0.3 V to VDD + 0.3 V
−0.3 V to VDD + 0.3 V
±10 mA
−40°C to +125°C
−65°C to +150°C
1 Transient currents of up to 100 mA do not cause latch-up.
AD2S1205
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION
Rev. A | Page 5 of 20
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for AD2S1205 electronic component. |
| Information | Total 20 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ AD2S1205.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| AD2S1200 | The function is 12-Bit R/D Converter with Reference Oscillator. Analog Devices | |
| AD2S1205 | The function is 12-Bit RDC. Analog Devices | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
AD2S
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||