|
|
Número de pieza | MC2800 | |
Descripción | Navigator Motion Processor | |
Fabricantes | PMD | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de MC2800 (archivo pdf) en la parte inferior de esta página. Total 63 Páginas | ||
No Preview Available ! www.DataSheet4U.com
Navigator™ Motion
Processor
MC2800 Series
Technical Specifications
Multiple Motor Type
for Brushed Servo and Brushless Servo Motion Control
Performance Motion Devices, Inc.
55 Old Bedford Road
Lincoln, MA 01773
Revision 1.8, October 2003
1 page Related Documents
Navigator Motion Processor User’s Guide (MC2000UG)
How to set up and use all members of the Navigator Motion Processor family.
Navigator Motion Processor Programmer’s Reference (MC2000PR)
Descriptions of all Navigator Motion Processor commands, with coding syntax and examples,
listed alphabetically for quick reference.
Navigator Motion Processor Technical Specifications
Five booklets containing physical and electrical characteristics, timing diagrams, pinouts, and pin
descriptions of each series:
MC2100 Series, for brushed servo motion control (MC2100TS);
MC2300 Series, for brushless servo motion control (MC2300TS);
MC2400 Series, for microstepping motion control (MC2400TS);
MC2500 Series, for stepping motion control (MC2500TS);
MC2800 Series, for brushed servo and brushless servo motion control (MC2800TS).
Navigator Motion Processor Developer’s Kit Manual (DK2000M)
How to install and configure the DK2000 developer’s kit PC board.
MC2800 Technical Specifications
v
5 Page 2 Functional Characteristics
2.1 Configurations, parameters, and performance
Available configurations
Operating modes
Communication modes
Serial port baud rate range
Position range
Velocity range
Acceleration/deceleration
ranges
Jerk range
Profile modes
Electronic gear ratio range
Filter modes
Filter parameter resolution
Position error tracking
Motor output modes
Commutation rate
Maximum encoder rate
Parallel encoder word size
Parallel encoder read rate
Hall sensor inputs
Servo loop timing range
4 axes (MC2840) or 2 axes (MC2820)
Closed loop (motor command is driven from output of servo filter)
Open loop (motor command is driven from user-programmed register)
8/8 parallel (8 bit external parallel bus with 8 bit internal command word size)
8/16 parallel (8 bit external parallel bus with 16 bit internal command word size)
16/16 parallel (16 bit external parallel bus with 16 bit internal command word
size)
Point to point asynchronous serial
Multidrop asynchronous serial
1,200 baud to 416,667 baud
-2,147,483,648 to +2,147,483,647 counts
-32,768 to +32,767 counts/sample with a resolution of 1/65,536 counts/sample
-32,768 to +32,767 counts/sample2 with a resolution of 1/65,536 counts/sample2
0 to ½ counts/sample3, with a resolution of 1/4,294,967,296 counts/sample3
S-curve point-to-point (Velocity, acceleration, jerk, and position parameters)
Trapezoidal point-to-point (Velocity, acceleration, deceleration, and position
parameters)
Velocity-contouring (Velocity, acceleration, and deceleration parameters)
Electronic Gear (Encoder or trajectory position of one axis used to drive a second
axis. Master and slave axes and gear ratio parameters)
-32,768 to +32,767 with a resolution of 1/65,536 (negative and positive direction)
Scalable PID + Velocity feedforward + Acceleration feedforward + Bias. Also
includes integration limit, settable derivative sampling time, and output motor
command limiting
16 bits
Motion error window (allows axis to be stopped upon exceeding programmable
window)
Tracking window (allows flag to be set if axis exceeds a programmable position
window)
Axis settled (allows flag to be set if axis exceeds a programmable position
window for a programmable amount of time after trajectory motion is compete)
PWM (10-bit resolution at 20 kHz)
DAC (16 bits)
20kHz for MC2820, 10kHz for MC2840
Incremental (up to 5 Mcounts/sec)
Parallel-word (up to 160 Mcounts/sec)
16 bits
20 kHz (reads all axes every 50 µsec)
3 Hall effect inputs per axis (TTL level signals)
153.6 µsec to 32.767 milliseconds
MC2800 Technical Specifications
11
11 Page |
Páginas | Total 63 Páginas | |
PDF Descargar | [ Datasheet MC2800.PDF ] |
Número de pieza | Descripción | Fabricantes |
MC2800 | Navigator Motion Processor | PMD |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |