|
|
Número de pieza | LMP7701 | |
Descripción | Wide Supply Range Amplifier | |
Fabricantes | National Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de LMP7701 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! www.DataSheet4U.com
PRELIMINARY
September 2005
LMP7701
Precision, CMOS Input, RRIO, Wide Supply Range
Amplifier
General Description
The LMP7701 is a single, low offset voltage, rail-to-rail input
and output precision amplifier with a CMOS input stage and
a wide supply voltage range. The LMP7701 is part of the
LMP™ precision amplifier family and is ideal for sensor
interface and other instrumentation applications.
The guaranteed low offset voltage of less than ±200 µV
along with the guaranteed low input bias current of less than
±10 pA make the LMP7701 ideal for precision applications.
The LMP7701 is built utilizing VIP50 technology, which al-
lows the combination of a CMOS input stage and a 12V
common mode and supply voltage range. This makes the
LMP7701 a great choice in many applications where con-
ventional CMOS parts cannot operate under the desired
voltage conditions.
The LMP7701 has a rail-to-rail input stage that significantly
reduces the CMRR glitch commonly associated with rail-to-
rail input amplifiers. This is achieved by trimming both sides
of the complimentary input stage, thereby reducing the dif-
ference between the NMOS and PMOS offsets. The output
of the LMP7701 swings within 40 mV of either rail to maxi-
mize the signal dynamic range in applications requiring low
supply voltage.
The LMP7701 is offered in space saving SOT23-5. This
small package is an ideal solution for area constrained PC
boards and portable electronics.
Features
Unless otherwise noted, typical values at VS = 5V
n Input offset voltage
±200 µV (max)
n Input bias current
300 fA
n Input voltage noise
12 nV/
n CMRR
100 dB
n Open loop gain
130 dB
n Temperature range
–40˚C to 125˚C
n Unity gain bandwidth
2.5 MHz
n Supply current
715 µA
n Supply Voltage Range
2.7V to 12V
n Rail-to-rail input and output
Applications
n High impedance sensor interface
n Battery powered instrumentation
n High gain amplifiers
n DAC buffer
n Instrumentation amplifier
n Active filters
Typical Application
Precision Current Source
LMP™ is a trademark of National Semiconductor Corporation.
© 2005 National Semiconductor Corporation DS201273
20127305
www.national.com
1 page Connection Diagram
5-Pin SOT23
Ordering Information
Package
5-Pin SOT-23
Part Number
LMP7701MF
LMP7701MFX
Top View
20127302
Package Marking
AC2A
Transport Media
1k Units Tape and Reel
3k Units Tape and Reel
NSC Drawing
MF05A
5 www.national.com
5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet LMP7701.PDF ] |
Número de pieza | Descripción | Fabricantes |
LMP7701 | LMP770x Precision CMOS Input RRIO Wide Supply Range Amplifiers (Rev. I) | Texas Instruments |
LMP7701 | Wide Supply Range Amplifier | National Semiconductor |
LMP7702 | LMP770x Precision CMOS Input RRIO Wide Supply Range Amplifiers (Rev. I) | Texas Instruments |
LMP7702 | (LMP7702 / LMP7704) Wide Supply Range Amplifiers | National Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |