Datenblatt-pdf.com


S30MS-P Schematic ( PDF Datasheet ) - SPANSION

Teilenummer S30MS-P
Beschreibung NAND Interface Memory Based
Hersteller SPANSION
Logo SPANSION Logo 




Gesamt 30 Seiten
S30MS-P Datasheet, Funktion
www.DataSheet4U.com
S30MS-P ORNANDTMFlash Family
S30MS01GP, S30MS512P
1Gb/512Mb, x8/x16, 1.8 Volt NAND Interface Memory Based on
MirrorBitTechnology
Data Sheet (Preliminary)
S30MS-P ORNANDTMFlash Family Cover Sheet
Notice to Readers: This document states the current technical specifications regarding the Spansion
product(s) described herein. Each product described herein may be designated as Advance Information,
Preliminary, or Full Production. See Notice On Data Sheet Designations for definitions.
Publication Number S30MS-P_00
Revision A Amendment 7
Issue Date August 4, 2006






S30MS-P Datasheet, Funktion
Data Sheet (Preliminary)
1. General Description
The S30MS-P is a 1.8V single voltage flash memory product manufactured using 90 nm MirrorBit™
technology. The S30MS01GP is a 1Gb device, organized as 64M Words or 128MB. The S30MS512P is a
512Mb device, organized as 32M Words or 64MB.
The S30MS-P family of devices offer advantages such as:
„ Fast write and sustained write speed suitable for data storage applications
„ Fast read speed and reliability suitable for demanding code storage applications
„ Proven MirrorBittechnology
The devices are offered in a 48-pin TSOP, or FBGA MCP-compatible packages. Each device has separate
chip enable (CE#) controls for the FBGA package.
The S30MS-P is a byte/word serial-type memory device that utilizes the I/O pins for both address and data
input/output, as well as for command input. The Erase and Program operations are automatically executed
making the device most suitable for applications such as solid-state disks, pictures storage for still cameras,
cellular phones, and other systems that require high-density non-volatile data storage.
Typical application requirements are shown in the table below with reference to the ORNAND capabilities.
Application
2G Network
3G Network
3.5G Network (HSPDA)
Full Speed USB
MP3 Playback
MPEG2 (H.262)
MPEG4 (H.264)
WiMax
Minimum Requirements
14.4 Kbps (1.8 KB/sec)
2 Mbps (250 KB/sec)
2.5 MB/sec
1.5 MB/sec
320 Kbps (40 KB/sec)
3 MB/sec
1 MB/sec
0.25 MB/sec
Spansion ORNAND
9
9
9
9
9
9
9
9
The devices include the following features:
„ Automatic page 0 read, allows access of the data in page 0 without command and address input of read
command after power-up
„ Chip Enable Don't Care support for direct connection with microcontrollers
„ Compatible with NAND Flash command set. Commands are written to the device using standard
microprocessor write timing. Write cycles provide commands, addresses and data
„ Initiation of program and erase functions through command sequences. Once a program or erase
operation begins, the host system should only poll for status or monitor the Ready/Busy# (RY/BY#) output
to determine whether the operation is complete
„ Manufactured using MirrorBit™ flash technology resulting in the highest levels of quality, reliability, and cost
effectiveness
4
S30MS-P ORNANDTM Flash Family
S30MS-P_00_A7 August 4, 2006

6 Page









S30MS-P pdf, datenblatt
Data Sheet (Preliminary)
5. Block Diagram
VCC
VSS
Address
Register
& Decoders
Command
Command
Register
CE#
RE#
WE#
Control Logic
& High Voltage
Generator
CLE ALE PRE WP#
2Gb: (2048M + 64M) bit
1Gb: (1024M + 32M) bit
512 Mb: (512M + 16M) bit
Flash Array
RY/BY#
Data Register & S/A
Cache Register
Y-Decoder
I/O Buffers & Latches
VCC
VSS
Global Buffers
Output
Driver
I/00
I/O7 or I/O15
6. Absolute Maximum Ratings
Parameter
Voltage on any pin relative to Vss
Storage Temperature
Operating Temperature
Temperature under bias
Short circuit current
Symbol
VIN/OUT
VCC
TSTG
TOPR
TBIAS
IOS
Rating
-0.5 to Vcc + 0.5
-0.5 to + 2.5
-65 to +150
0 to +70 (Commercial)
-40 to +85 (Industrial)
-25 to +85 (Wireless)
-65 to 125
5
Unit
V
oC
oC
oC
mA
Notes:
1. Minimum DC voltage is -0.6v on input/output pins. During transitions, this level may undershoot to -2.0v for periods <30ns.
2. Maximum DC voltage on input/output pins is Vcc+0.3v which, during transitions, may overshoot to Vcc+2.0v for periods < 20ns.
3. Permanent device damage may occur if Absolute Maximum Ratings are exceeded. Functional operation should be restricted to the
conditions as details in the operational sections of this data sheet. Exposure to absolute maximum rating conditions for extended periods
may affect reliability.
10
S30MS-P ORNANDTM Flash Family
S30MS-P_00_A7 August 4, 2006

12 Page





SeitenGesamt 30 Seiten
PDF Download[ S30MS-P Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
S30MS-PNAND Interface Memory BasedSPANSION
SPANSION

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche