|
|
Número de pieza | XN09D61 | |
Descripción | Silicon PNP Epitaxial Transistor | |
Fabricantes | Panasonic Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de XN09D61 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! www.DataSheet4U.com
Composite Transistors
XN09D61
Silicon PNP epitaxial planar type (Tr)
Silicon epitaxial planar type (SBD)
For DC-DC converter
0.50+–00..0150
0.30+–00..0150
Unit: mm
0.16+–00..0160
■ Features
• Two elements incorporated into one package (Tr + SBD)
• Reduction of the mounting area and assembly cost by one half
• Low collector-emitter saturation voltage VCE(sat)
■ Basic Part Number
• 2SA2046 + MA3ZD12
■ Absolute Maximum Ratings Ta = 25°C
Parameter
Symbol Rating
Unit
Tr
Collector-base voltage
VCBO
−15
(Emitter open)
V
Collector-emitter voltage
(Base open)
VCEO
−15
V
Emitter-base voltage
(Collector open)
VEBO
−5
V
SBD
Collector current
Peak collector current
Reverse voltage
Repetitive peak reverse voltage
Forward current (Average)
Non-repetitive peak
forward surge current
IC
ICP
VR
VRRM
IF(AV)
IFSM
−1.5
−3
20
25
700
2
A
A
V
V
mA
A
Overall
Total power dissipation *
Junction temperature
Storage temperature
PT 600 mW
Tj 125 °C
Tstg −55 to +125 °C
Note) *: Measuring on ceramic substrate at 15 mm × 15 mm × 0.6 mm
65
4
123
(0.95) (0.95)
1.9±0.1
2.90+–00..0250
Display at No.1 lead
10°
1: Emitter
2: Base
3: Anode
4: Collector (Cathode)
5: Collector (Cathode)
6: Collector (Cathode)
Mini6-G1 Package
Marking Symbol: RA
Internal Connection
65
4
123
■ Electrical Characteristics Ta = 25°C ± 3°C
• Tr
Parameter
Symbol
Conditions
Min Typ Max Unit
Collector-base voltage (Emitter open)
Collector-emitter voltage (Base open)
Emitter-base voltage (Collector open)
Collector-base cutoff current (Emitter open)
Forward current transfer ratio *
Collector-emitter saturation voltage *
VCBO
VCEO
VEBO
ICBO
hFE
VCE(sat)
IC = −10 µA, IE = 0
IC = −1 mA, IB = 0
IE = −10 µA, IC = 0
VCB = −10 V, IE = 0
VCE = −2 V, IC = −100 mA
IC = −750 mA, IB = −15 mA
IC = −1.5 A, IB = −50 mA
−15
−15
−5
− 0.1
160 560
−90 −200
−130
V
V
V
µA
mV
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.
2. *: Pulse measurement
Publication date: June 2003
SJJ00247BED
1
1 page Request for your special attention and precautions in using the technical information
and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government
if any of the products or technologies described in this material and controlled under the "Foreign
Exchange and Foreign Trade Law" is to be exported or taken out of Japan.
(2) The technical information described in this material is limited to showing representative characteris-
tics and applied circuits examples of the products. It neither warrants non-infringement of intellec-
tual property right or any other rights owned by our company or a third party, nor grants any license.
(3) We are not liable for the infringement of rights owned by a third party arising out of the use of the
product or technologies as described in this material.
(4) The products described in this material are intended to be used for standard applications or general
electronic equipment (such as office equipment, communications equipment, measuring instru-
ments and household appliances).
Consult our sales staff in advance for information on the following applications:
• Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment,
combustion equipment, life support systems and safety devices) in which exceptional quality and
reliability are required, or if the failure or malfunction of the products may directly jeopardize life or
harm the human body.
• Any applications other than the standard applications intended.
(5) The products and product specifications described in this material are subject to change without
notice for modification and/or improvement. At the final stage of your design, purchasing, or use of
the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that
the latest specifications satisfy your requirements.
(6) When designing your equipment, comply with the guaranteed values, in particular those of maxi-
mum rating, the range of operating power supply voltage, and heat radiation characteristics. Other-
wise, we will not be liable for any defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of
incidence of break down and failure mode, possible to occur to semiconductor products. Measures
on the systems such as redundant design, arresting the spread of fire or preventing glitch are
recommended in order to prevent physical injury, fire, social damages, for example, by using the
products.
(7) When using products for which damp-proof packing is required, observe the conditions (including
shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets
are individually exchanged.
(8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written
permission of Matsushita Electric Industrial Co., Ltd.
2002 JUL
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet XN09D61.PDF ] |
Número de pieza | Descripción | Fabricantes |
XN09D61 | Silicon PNP Epitaxial Transistor | Panasonic Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |