|
|
PDF CV111-3A Data sheet ( Hoja de datos )
| Número de pieza | CV111-3A | |
| Descripción | UMTS-band High Linearity Downconverter | |
| Fabricantes | WJ Communication | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de CV111-3A (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
CV111-3A
UMTS-band High Linearity Downconverter
The Communications Edge TM
Product Information
Product Features
• High dynamic range downconverter
with integrated LO, IF, & RF amps
• RF: 1900 – 2200 MHz
• IF: 65 – 300 MHz
• +38 dBm Output IP3
• +21 dBm Output P1dB
• 5.3 dB Noise Figure
• +5V Single supply operation
• Pb-free 6mm 28-pin QFN package
• Low-side LO configuration
• Common footprint with other
PCS/ cellular versions
Specifications (1)
Product Description
Functional Diagram
The CV111-3A is a high linearity downconverter
designed to meet the demanding issues for performance,
functionality, and cost goals of current and next
generation mobile infrastructure basestations. It provides
high dynamic range performance in a low profile
surface-mount leadless package that measures 6 x 6 mm
square.
Functionality includes RF amplification, frequency
conversion and IF amplification, while an integrated LO
driver amplifier powers the passive mixer. The MCM is
implemented with reliable and mature GaAs MESFET
and InGaP HBT technology.
28 27 26 25 24 23 22
RF OUT 1
IF 21 IF OUT
GND 2 RF Amp
IF Amp 20 GND
GND 3
19 GND
GND 4
GND 5
18 GND
LO Driver Amp
17 BIAS
GND 6
RF
MIXRF 7
16 GND
LO 15 LO IN
8 9 10 11 12 13 14
Typical applications include frequency down conversion,
modulation and demodulation for receivers used in
CDMA, CDMA2000, W-CDMA / IMT2000, GPRS, and
EDGE 2.5G mobile infrastructure technologies for
UMTS frequency bands.
Top View
Parameters
RF Frequency Range
LO Frequency Range
IF Center Frequency Range
% Bandwidth around IF center frequency
IF Test Frequency
SSB Conversion Gain
Gain Drift over Temp (-40 to 85 °C)
Output IP3
Output IP2
Output 1dB Compression Point
Noise Figure
LO Input Drive Level
LO-RF Isolation
LO-IF Isolation
Return Loss: RF Port
Return Loss: LO Port
Return Loss: IF Port
Operating Supply Voltage
Supply Current
FIT Rating
Junction Temperature
Units
MHz
MHz
MHz
%
MHz
dB
dB
dBm
dBm
dBm
dB
dBm
dB
dB
dB
dB
dB
V
mA
failures/1E9 hrs
°C
Min
-2.5
+4.9
290
Typ
1900 – 2200
1600 – 2135
65 – 300
±7.5
240
20
±0.5
+38
+48
+21
5.3
0
40
25
14
14
14
+5
360
Max Comments
See note 2
See note 3
Temp = 25 °C
Referenced to +25 °C
See note 4
See note 4
See note 5
+2.5
PLO = 0 dBm
PLO = 0 dBm
+5.1
480
72.1 @ 70o C ambient, 90% confidence
160 See note 6
1. Specifications when using the application specific circuit (shown on page 3) with a low side LO = 0 dBm in a downconverting application over the operating case temperature range.
2. IF matching components affect the center IF frequency. Proper component values for other IF center frequencies than shown can be provided by emailing to [email protected].
3. The IF bandwidth of the converter is defined as 15% around any center frequency in its operating IF frequency range. The bandwidth is determined with external components. Specifications are valid around
the total ±7.5% bandwidth. ie. with a center frequency of 80 MHz, the specifications are valid from 80 ± 6 MHz.
4. Assumes the supply voltage = +5 V. OIP3 is measured with Δf = 1 MHz with IFout = 5 dBm / tone.
5. Assumes LO injection noise is filtered at the thermal noise floor, -174 dBm/Hz, at the RF, IF, and Image frequencies.
6. The maximum junction temperature ensures a minimum MTTF rating of 1 million hours of usage.
Absolute Maximum Rating
Parameter
Operating Case Temperature
Storage Temperature
DC Voltage
Junction Temperature
RF Input (continuous)
Rating
-40 to +85° C
-55 to +125° C
+6 V
+220 °C
+2 dBm
Ordering Information
Part No.
CV111-3AF
CV111-3APCB75
CV111-3APCB240
Description
UMTS-band High Linearity Downconverter
(lead-free/RoHS-compliant 6x6mm QFN package)
Fully Assembled Eval. Board, IF = 75MHz
Fully Assembled Eval. Board, IF = 240MHz
Operation of this device above any of these parameters may cause permanent damage.
Specifications and information are subject to change without notice
WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6621 • e-mail: [email protected] • Web site: www.wj.com
Page 1 of 5 May 2006
1 page  
CV111-3A
UMTS-band High Linearity Downconverter
The Communications Edge TM
Product Information
CV111-3AF Mechanical Information
This package is lead-free/RoHS-compliant. The plating material on the pins is annealed matte tin over copper. It is compatible with both
lead-free (maximum 260°C reflow temperature) and leaded (maximum 245°C reflow temperature) soldering processes.
Outline Drawing
Product Marking
The component will be lasermarked with a
“CV111-3AF” product label with an
alphanumeric lot code on the top surface of the
package.
Tape and reel specifications for this part will be
located on the website in the “Application
Notes” section.
ESD / MSL Information
Mounting Configuration / Land Pattern
ESD Rating: Class 1B
Value:
Passes 500V to <1000V
Test:
Human Body Model (HBM)
Standard: JEDEC Standard JESD22-A114
ESD Rating: Class III
Value:
Passes 500V to <1000V
Test:
Charged Device Model (CDM)
Standard: JEDEC Standard JESD22-C101
MSL Rating: Level 2 at +260°C convection reflow
Standard: JEDEC Standard J-STD-020
Functional Pin Layout
Pin Function Pin Function
1 RF Amp Output 15 LO Amp Input
2
GND
16 GND
3 N/C or GND 17 LO Amp Bias
4
GND
18 GND
5 N/C or GND 19 N/C or GND
6
GND
20 GND
7 Mixer RF Input 21
IF Amp
Output/Bias
8
GND
22 GND
9 N/C or GND 23 IF Amp Input
10 GND 24 GND
11 Mixer LO Input 25 Mixer IF Output
12 GND 26 GND
13
LO Amp
Output/Bias
27 RF Amp Input
14 GND 28 GND
Specifications and information are subject to change without notice
WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6621 • e-mail: [email protected] • Web site: www.wj.com
Page 5 of 5 May 2006
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet CV111-3A.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| CV111-3 | UMTS-band High Linearity Downconverter | WJ Communication |
| CV111-3A | UMTS-band High Linearity Downconverter | WJ Communication |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |