|
|
PDF VG025 Data sheet ( Hoja de datos )
| Número de pieza | VG025 | |
| Descripción | High Linearity Variable Gain Amplifier | |
| Fabricantes | WJ Communication | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de VG025 (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
VG025
High Linearity Variable Gain Amplifier
The Communications Edge TM
Product Information
Product Features
• Tunable within 50 – 2200 MHz
• 21 dB Attenuation Range
• Constant +40 dBm OIP3 and +21
dBm P1dB over all gain settings
• Single +5V Supply Voltage
• 16-pin 4x4mm lead-free/green/
RoHS-compliant QFN Package
• MTTF > 1000 years
Applications
• AGC circuitry
• Temperature compensation circuits
• DCS/PCS, cdma2000TM,W-CDMA
Product Description
The VG025 is a high dynamic range variable gain
amplifier (VGA) capable of achieving an analog
attenuation range of up to 21 dB. The +21 dBm output
compression point and +40 dBm output intercept point
of the amplifier are maintained over the entire
attenuation range, making the VG025 ideal for use in
temperature compensation circuits or AGC loops.
The VG025 is available in a lead-free/green/RoHS-
compliant 16-pin 4x4mm QFN surface-mount package
with an exposed backside paddle to allow an MTTF
rating of over 1000 years at a mounting temperature of
+85º C. All devices are 100% RF & DC tested and
packaged on tape and reel for automated surface-mount
assembly.
Functional Diagram
16 15 14 13
N/C 1
12 RF OUT
N/C 2
11 N/C
N/C 3
10
Interstage
Match
RF IN 4
9 N/C
5678
Function
RF Input
Gain Control
Interstage Match
RF Output / DC bias
No Connect or GND
Ground
Pin Number
4
8
6, 10
12
All other pins
Backside slug
Specifications (1)
Typical Performance (1)
Parameter
Units
Operational Bandwidth
MHz
Test Frequency
Gain (2)
Input Return Loss (2)
Output Return Loss (2)
MHz
dB
dB
dB
Output P1dB
Output IP3 (3)
Noise Figure (2)
dBm
dBm
dB
Gain Variation Range (4)
dB
Gain Variation Control Voltage (5) V
Supply Voltage
V
Operating Current Range
mA
Gain Control Pin Current
mA
Min
50
13.5
37
16
0
120
Typ
800
15
6.3
7.6
21.3
39
5.3
21
5
150
26
Max
2200
24
4.5
180
28
1. Test conditions unless otherwise noted: 25ºC, Vsupply = +5 V, in tuned application circuit. Vctrl
is the control voltage through the 120 Ω dropping resistor as shown in the application circuit on page 2.
2. Specifications refer to the device at the maximum gain setting (Vctrl=0V). The input and output
return loss will be dramatically improved with an attenuation setting greater than 1 dB.
3. 3OIP measured with two tones at an output power of +5 dBm/tone separated by 10 MHz. The
suppression on the largest IM3 product is used to calculate the 3OIP using a 2:1 rule.
4. The gain variation range is measured as the difference in gain with Vctrl = 0 and 4.5V at 800 MHz.
5. This voltage refers to the VCTRL as shown in the circuit schematic on page 2. There should be a
series resistance of 120Ω between the control voltage and pin 8 for proper operation.
Parameter
Frequency
Gain (2)
Input Return Loss (2)
Output Return Loss (2)
Output P1dB
Output IP3 (3)
Noise Figure (2)
Gain Variation Range
Units
MHz
dB
dB
dB
dBm
dBm
dB
dB
240
15.4
11
11
21.8
42
4.5
20
Typical
800 1960
15 8.4
6.3 12
7.6 6.5
21.3 22
39 40
5.3 8.1
21 14
2140
8.4
11
5.6
22
40
8.2
13
Absolute Maximum Rating
Parameter
Operating Case Temperature
Storage Temperature
Amplifier Supply Voltage (pin 12)
Pin 8 (Gain Control) Current
RF Input Power (continuous)
Junction Temperature
Rating
-40 to +85 °C
-55 to +125 °C
+6 V
30 mA
4 dB above Input P1dB
+220 °C
Ordering Information
Part No. Description
VG025-G
High Linearity Variable Gain Amplifier
(lead-free/green/RoHS-compliant 4x4mm QFN package)
VG025-PCB240 240 MHz Evaluation Board
VG025-PCB800 800 MHz Evaluation Board
VG025-PCB2000 1.7 – 2.2 GHz Evaluation Board
Operation of this device above any of these parameters may cause permanent damage.
Specifications and information are subject to change without notice
WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6621 • e-mail: [email protected] • Web site: www.wj.com
Page 1 of 7 January 2006
1 page  
VG025
High Linearity Variable Gain Amplifier
The Communications Edge TM
Product Information
1960 MHz Circuit Performance (VG025-PCB2000)
S21 vs. Frequency vs. Control Voltage
10
5
0
-5
-10
1700
Vctrl=0.00V
Vctrl=1.72V
Vctrl=0.82V
Vctrl=4.50V
Vctrl=1.15V
1750 1800 1850 1900 1950
Frequency (MHz)
2000
P1dB vs. Frequency
Vctrl=0V (Minimum attenuation)
26
24
22
20
18
16
1700
1800
1900 2000
Frequency (MHz)
2100
2200
OIP3 vs. Attenuation Setting
frequency = 1960, 1961 MHz, +5 dBm/tone, +25 °C
45
S11 vs. Frequency vs. Control Voltage
0
-5
-10
-15
-20
-25
1700
1750
Vctrl=0.00V
Vctrl=1.15V
Vctrl=4.50V
1800 1850 1900
Frequency (MHz)
Vctrl=0.82V
Vctrl=1.72V
1950 2000
Phase change vs. Attenuation
25 °C, 1900 MHz
20
10
0
-10
-20
0
45
2 4 6 8 10 12
Attenuation (dB)
OIP3 vs. Output Power
frequency = 1900, 1961 MHz, 0dB Atten.
14
40 40
S22 vs. Frequency vs. Control Voltage
0
-5
-10
-15
-20
-25
1700
1750
Vctrl=0.00V
Vctrl=1.15V
Vctrl=4.50V
1800 1850 1900
Frequency (MHz)
Vctrl=0.82V
Vctrl=1.72V
1950 2000
Noise Figure vs. Frequency
Vctrl=0V (Maximum Gain Setting)
9
8
7
6
5
4
1700
1800 1900 2000 2100
Frequency (MHz)
2200
IMD products vs. Output Power
fundamental frequency = 800, 801 MHz; +25 °C, 0dB Atten
-40
IMD_Low
IMD_High
-60
35 35
-80
30
25
0
10
8
6
4
2
0
-2
-4
-6
0
2468
Attenuation (dB)
Gain vs. Pin 8 Attn. Control Current
25 °C, 1900 MHz
5 10 15 20
Pin 8 Attenuation Control Current (mA)
30
25
10 -4
0
-2
-4
-6
-8
-10
-12
-14
25 0
+25 °C
-40 °C
+85 °C
048
Output Power (dBm)
Normalized Gain vs. Vctrl
25 °C, 1900 MHz
12
1234
Vctrl (V)
-100
-120
16 -4
30
25
20
15
10
5
0
50
0 4 8 12
Output Power (dBm)
Ictrl vs. Vctrl
25 °C
1234
Vctrl (V)
16
5
Specifications and information are subject to change without notice
WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6621 • e-mail: [email protected] • Web site: www.wj.com
Page 5 of 7 January 2006
5 Page | ||
| Páginas | Total 7 Páginas | |
| PDF Descargar | [ Datasheet VG025.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| VG025 | High Linearity Variable Gain Amplifier | WJ Communication |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |