Datenblatt-pdf.com


OX16C95X Schematic ( PDF Datasheet ) - Oxford Semiconductor

Teilenummer OX16C95X
Beschreibung HIGH-PERFORMANCE UART FAMILY REFERENCE DRIVERS
Hersteller Oxford Semiconductor
Logo Oxford Semiconductor Logo 




Gesamt 10 Seiten
OX16C95X Datasheet, Funktion
www.DataSheet4U.com
OX16C95x
OX16PCI954
HIGH-PERFORMANCE UART FAMILY
REFERENCE DRIVERS
This document describes installation and use of the Oxford Semiconductor reference
drivers for the OX16C95x high performance UART family, including the OX16PCI954
Quad UART with PCI interface.
Version 2.0 (01 February 2000)






OX16C95X Datasheet, Funktion
Custom solutions & drivers for the OX16PCI954
VERSION 1.0
4.2 OX16C95x (standard UARTs)
4.2.1 Windows 95/98 and Windows 2000 drivers for standard UARTs
Overview
The drivers for standard ports use the same port driver as the OX16PCI954 set, therefore the same features are available:
128-byte receiver and transmitter FIFOs
Adjustable receiver and transmitter interrupt trigger level
Automatic flow control
Quad speed (using Times clock register)
Flexible baud rate generation up to 60Mbps (50Mbps on OX16C954)
RS485 half-duplex configuration
Installation
Windows will identify all COM ports as standard communications ports. Once a 95x COM port is installed as a generic port, update the
driver as follows:
1. Click on Start / Settings / Control Panel
2. Double click “System” to bring up the system properties dialog box
3. Select the “Device Manager” tab of this dialog (with the “View devices by type” option selected.
4. Now click on the [+] next to the “Ports (COM & LPT)” icon to show the list of installed COM ports (If this section is not present or
no COM ports are listed, there are no serial devices installed in Windows. To install COM port hardware, consult your Windows /
Hardware documentation.)
5. Double click on the port you want to install the new driver for to bring up the settings dialog for that port
6. Select the driver tab and click the update/change driver button.
7. Windows 95
Click on “Have Disk” and specify the location of the driver files. Click OK
The files will now be copied and the driver installed.
8. Windows 98
When the “Update Device Driver Wizard” asks what you want Windows to do, select “Search for a better driver” and then click next.
When asked where to select the “Specify Location” box and type the location of the driver files. Click ‘next’ and the driver will be
installed.
9. Windows 2000
The system starts the Upgrade Device Driver Wizard. Click ‘Next’
Check “Search for a suitable driver for my device” and click Next. Point the wizard at the driver files (on floppy disk or fixed disk) and
click Next. You may have to enter a path to the driver files.
The system will find a selection of suitable drivers. Check “Install one of the other drivers” and then ‘Next’.
Install the “Oxford Semiconductor OX16C95x Communications port”
The files are copied. Click finish to exit the Wizard (and possibly restart)
Alternatively, the driver can be installed manually for a new device without running the auto-detect routines.
4.2.2 Windows NT4 note
There is no enhanced mode driver for standard UARTs in Windows NT4.0. This is because the generic driver will detect any ISA ports and
use them itself.
Oxford Semiconductor Ltd.
6

6 Page







SeitenGesamt 10 Seiten
PDF Download[ OX16C95X Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
OX16C950High Performance UARTOxford Semiconductor
Oxford Semiconductor
OX16C950BIntelligent Single Channel UARTOxford Semiconductor
Oxford Semiconductor
OX16C954High Performance Quad UART with 128-byte FIFOs Intel / Motorola Bus InterfaceETC
ETC
OX16C95XHIGH-PERFORMANCE UART FAMILY REFERENCE DRIVERSOxford Semiconductor
Oxford Semiconductor

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche