|
|
Número de pieza | SY58024U | |
Descripción | CROSSPOINT SWITCH CML OUTPUTS AND INTERNAL I/O TERMINATION | |
Fabricantes | Micrel Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de SY58024U (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
No Preview Available ! www.DataSheet4U.com
Micrel
ULTRA-LOW JITTER DUAL 2 × 2
CROSSPOINT SWITCH w/ CML OUTPUTS
AND INTERNAL I/O TERMINATION
Precision Edge™
Precision ESdYg5e80™24U
SY58024U
FEATURES
s Guaranteed AC performance over temperature and
voltage:
• >10.7Gbps data throughput
• <60ps tr/tf times
• <350ps tpd (IN-to-Q)
• <20ps skew
s Low jitter:
• <10pspp total jitter (clock)
• <1psrms random jitter (data)
• <10pspp deterministic jitter (data)
s Crosstalk induced jitter: <0.7psrms
s Unique, patent-pending input isolation minimizes
adjacent channel crosstalk
s Accepts an input signal as low as 100mV
s Unique, patent-pending input termination and VT pin
accepts DC-coupled and AC-coupled differential
inputs: LVPECL, LVDS, and CML
s Fully differential inputs/outputs
s 50Ω source terminated CML outputs
s Power supply 2.5V ±5% and 3.3V ±10%
s Industrial –40°C to +85°C temperature range
s Available in 32-pin (5mm × 5mm) MLF™ package
APPLICATIONS
Precision Edge™
DESCRIPTION
The SY58024U is a 2.5V/3.3V precision, high-speed, fully
differential dual CML crosspoint switch. The SY58024U is
optimized to provide two identical output copies with less
than 20ps of skew and ultra-low jitter. The SY58024U can
process clock signals as fast as 6GHz or data patterns up
to 10.7Gbps.
The differential input includes Micrel’s unique, 3-pin input
termination architecture that allows the SY58024U to directly
interface to LVPECL, LVDS, and CML differential signal
(AC- or DC-coupled) without any level-shifting or termination
resistor networks in the signal path. The CML outputs
features a 400mV typical swing into 50Ω loads, and provides
an extremely fast rise/fall time guaranteed to be less than
60ps.
The SY58024U operates from a 2.5V ±5% supply or
3.3V ±10% supply and is guaranteed over the full industrial
temperature range (–40°C to +85°C). For applications that
require high-speed single channel CML switches, consider
the SY58023U. The SY58024U is part of Micrel’s high-
speed, Precision Edge™ product line.
Data sheets and support documentation can be found on
Micrel’s website at www.micrel.com.
s Gigabit Ethernet data/clock routing
s SONET data/clocking routing
s Switch fabric clock routing
s Redundant switchover
s Backplane redundancy
Precision Edge is a trademark of Micrel, Inc.
MicroLeadFrame and MLF are trademarks of Amkor Technology, Inc.
M9999-091404
[email protected] or (408) 955-1690
1
Rev.: B Amendment: /0
Issue Date: September 2004
1 page Micrel
Precision Edge™
SY58024U
AC ELECTRICAL CHARACTERISTICS(6)
VCC = +2.5V ±5% or +3.3V ±10%; RL = 100Ω across each output pair; TA = –40°C to +85°C, unless otherwise stated.
Symbol
Parameter
Condition
Min Typ
Max
Units
fMAX
Maximum Operating Frequency
VIN ≥ 100mV; VOUT ≥ 200mV
Clock 6
NRZ Data 10.7
GHz
Gbps
tpd Propagation Delay
IN-to-Q
SEL-to-Q
200 350 ps
100 400 ps
tSKEW
Channel-to-Channel Skew
(Within Bank)
Note 7
20 ps
Part-to-Part Skew
Note 8
75 ps
tJITTER
Clock
Data
Cycle-to-Cycle Jitter
Total Jitter
Random Jitter
Deterministic Jitter
Crosstalk Induced Jitter
Adjacent Channel
Note 9
Note 10
Note 11
Note 12
Note 13
1 psrms
10 pspp
1 psrms
10 pspp
0.7 psrms
tr, tf Output Rise/Fall Time
20% to 80% at full swing.
25 60 ps
Notes:
6. High frequency AC-parameters are guaranteed by design and characterization.
7. Skew is measured between outputs of the same bank under identical transitions.
8. Skew is defined for two parts with identical power supply voltages at the same temperature and with no skew of the edges at the respective inputs.
9. Cycle-to-cycle jitter definition: The variation of periods between adjacent cycles, Tn–Tn–1 where T is the time between rising edges of the output
signal.
10. Total jitter definition: With an ideal clock input of frequency ≤ fMAX, no more than one output edge in 1012 output edges will deviate by more than the
specified peak-to-peak jitter value.
11. Random jitter is measured with a K28.7 comma detect character pattern, measured at 2.5Gbps–3.2Gbps.
11. Deterministic jitter is measured at 2.5Gbps–3.2Gbps with both K28.5 and 223–1 PRBS pattern.
13. Crosstalk induced jitter is defined as the added jitter that results from signals applied to two adjacent channels. It is measured at the output while
applying similar, differential clock frequencies that are asynchronous with respect to each other at inputs.
SINGLE-ENDED AND DIFFERENTIAL SWINGS
VIN,
VOUT
Typ. 400mV
Figure 1a. Single-Ended Voltage Swing
VDIFF_IN,
VDIFF_OUT (Typ. 800mV)
Figure 1b. Differential Voltage Swing
M9999-091404
[email protected] or (408) 955-1690
5
5 Page Micrel
32 LEAD MicroLeadFrame™ (MLF-32)
Precision Edge™
SY58024U
Package
EP- Exposed Pad
Die
Rev. 01
CompSide Island
Heat Dissipation
Heat Dissipation
Heavy Copper Plane
Heavy Copper Plane
VEE
VEE
PCB Thermal Consideration for 32-Pin MLF™ Package
(Always solder, or equivalent, the exposed pad to the PCB)
Package Notes:
1. Package meets Level 2 qualification.
2. All parts are dry-packaged before shipment.
3. Exposed pads must be soldered to a ground for proper thermal management.
MICREL, INC. 1849 FORTUNE DRIVE SAN JOSE, CA 95131 USA
TEL + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB http://www.micrel.com
The information furnished by Micrel in this data sheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use.
Micrel reserves the right to change circuitry and specifications at any time without notification to the customer.
Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can
reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into
the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s
use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser’s own risk and Purchaser agrees to fully indemnify
Micrel for any damages resulting from such use or sale.
© 2004 Micrel, Incorporated.
M9999-091404
[email protected] or (408) 955-1690
11
11 Page |
Páginas | Total 11 Páginas | |
PDF Descargar | [ Datasheet SY58024U.PDF ] |
Número de pieza | Descripción | Fabricantes |
SY58024U | CROSSPOINT SWITCH CML OUTPUTS AND INTERNAL I/O TERMINATION | Micrel Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |