Datenblatt-pdf.com


VO2630 Schematic ( PDF Datasheet ) - Vishay Intertechnology

Teilenummer VO2630
Beschreibung (VO2601 - VO2631) High Speed Optocoupler
Hersteller Vishay Intertechnology
Logo Vishay Intertechnology Logo 




Gesamt 12 Seiten
VO2630 Datasheet, Funktion
6N137, VO2601, VO2611, VO2630, VO2631, VO4661
www.vishay.com
Vishay Semiconductors
High Speed Optocoupler, Single and Dual, 10 MBd
Single channel
NC 1
A2
C3
NC 4
8 VCC
7 VE
6 VO
5 GND
6N137, VO2601, VO2611
Dual channel
A1 1
C1 2
C2 3
A2 4
8 VCC
7 VO1
6 VO2
5 GND
VO2630, VO2631, VO4661
22747
DESCRIPTION
The 6N137, VO2601, and VO2611 are single channel
10 MBd optocouplers utilizing a high efficient input LED
coupled with an integrated optical photodiode IC detector.
The detector has an open drain NMOS-transistor output,
providing less leakage compared to an open collector
Schottky clamped transistor output. The VO2630, VO2631,
and VO4661 are dual channel 10 MBd optocouplers. For the
single channel type, an enable function on pin 7 allows the
detector to be strobed. The internal shield provides a
guaranteed common mode transient immunity of 5 kV/μs for
the VO2601 and VO2631 and 15 kV/μs for the VO2611 and
VO4661. The use of a 0.1 μF bypass capacitor connected
between pin 5 and 8 is recommended.
FEATURES
• Choice of CMR performance of 15 kV/μs,
5 kV/μs, and 1000 V/μs
• High speed: 10 MBd typical
• +5 V CMOS compatibility
• Pure tin leads
• Guaranteed AC and DC performance over
temperature: -40 °C to +100 °C temperature
range
• Meets IEC 60068-2-42 (SO2) and IEC 60068-2-43 (H2S)
requirements
• Low input current capability of 5 mA
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Microprocessor system interface
• PLC, ATE input/output isolation
• Computer peripheral interface
• Digital fieldbus isolation: CC-link, DeviceNet, profibus, SDS
• High speed A/D and D/A conversion
• AC plasma display panel level shifting
• Multiplexed data transmission
• Digital control power supply
• Ground loop elimination, noise isolation
AGENCY APPROVALS
• UL1577
• cUL
• DIN EN 60747-5-5 (VDE 0884-5) available with option 1
• BS EN 60950-1
• CQC GB8898-2011, GB4943.1-2011
ORDERING INFORMATION
V O 2 6 0 1 - X 0 # #T
PART NUMBER
PACKAGE OPTION
TAPE
AND
REEL
DIP-8
7.62 mm
Option 7
Option 6
10.16 mm
Option 9
AGENCY CERTIFIED/PACKAGE
BSI, UL, cUL
DIP-8
DIP-8, 400 mil, option 6
SMD-8, option 7
SMD-8, option 9
VDE, BSI, UL, cUL
DIP-8, 400 mil, option 6
SMD-8, option 7
1000
6N137
6N137-X006
6N137-X007T
6N137-X009T
1000
-
-
CHANNELS 1
CMR (V/μs)
5000
VO2601
VO2601-X006
VO2601-X007T
-
5000
VO2601-X016
VO2601-X017T
15 000
VO2611
VO2611-X006
VO2611-X007T
-
15 000
VO2611-X016
VO2611-X017T
1000
VO2630
VO2630-X006
VO2630-X007T
VO2630-X009T
1000
-
-
> 0.7 mm
CHANNELS 2
CMR (V/μs)
5000
VO2631
VO2631-X006
VO2631-X007T
-
5000
VO2631-X016
VO2631-X017T
> 0.1 mm
15 000
VO4661
VO4661-X006
VO4661-X007T
-
15 000
-
-
Rev. 1.9, 16-Mar-15
1 Document Number: 84732
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000






VO2630 Datasheet, Funktion
6N137, VO2601, VO2611, VO2630, VO2631, VO4661
www.vishay.com
Vishay Semiconductors
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
1.7
1.6
1.5
1.4 IF = 20 mA
1.3
1.2 IF = 10 mA
1.1 IF = 1 mA
1.0
-40 -20 0 20 40 60 80 100
Tamb - Ambient Temperature (°C)
Fig. 6 - Forward Voltage vs. Ambient Temperature
4.0
3.5
3.0
2.5
VCC = 5 V
IF = 10 mA
2.0
VCC = 7 V
IF = 10 mA
1.5
1.0
0.5
0.0
-40 -20 0 20 40 60 80 100
17614
Tamb - Ambient Temperature (°C)
Fig. 9 - Low Level Supply Current vs. Ambient Temperature
1.60
1.55
1.50
1.45
1.40
1.35
1.30
1.25
1.20
1.15
1.10
0
17611
5 10 15 20 25 30 35 40 45 50
IF - Forward Current (mA)
Fig. 7 - Forward Voltage vs. Forward Current
3.5
3.4
VCC = 7 V
IF = 0.25 mA
3.3
3.2 VCC = 5 V
IF = 0.25 mA
3.1
3.0
2.9
2.8
-40 -20 0 20 40 60 80 100
17615
Tamb - Ambient Temperature (°C)
Fig. 10 - High Level Supply Current vs. Ambient Temperature
7
6
5
4
3 VR = 5 V
2
1
0
-40 -20 0 20 40 60 80 100
17613-1 Tamb - Ambient Temperature (°C)
Fig. 8 - Reverse Current vs. Ambient Temperature
2.8
2.7
2.6
RL = 350 Ω
2.5
2.4
2.3 RL = 1 kΩ
2.2 RL = 4 kΩ
2.1
-40 -20 0 20 40 60 80 100
17616
Tamb - Ambient Temperature (°C)
Fig. 11 - Input Threshold On Current vs. Ambient Temperature
Rev. 1.9, 16-Mar-15
6 Document Number: 84732
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

6 Page









VO2630 pdf, datenblatt
www.vishay.com
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1 Document Number: 91000

12 Page





SeitenGesamt 12 Seiten
PDF Download[ VO2630 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
VO2630(VO2601 - VO2631) High Speed OptocouplerVishay Intertechnology
Vishay Intertechnology
VO2630High Speed OptocouplerVishay Siliconix
Vishay Siliconix
VO2631(VO2601 - VO2631) High Speed OptocouplerVishay Intertechnology
Vishay Intertechnology
VO2631High Speed OptocouplerVishay Siliconix
Vishay Siliconix

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche