Datenblatt-pdf.com


XC-IS22CD Schematic ( PDF Datasheet ) - Pioneer

Teilenummer XC-IS22CD
Beschreibung CD Tuner Deck
Hersteller Pioneer
Logo Pioneer Logo 




Gesamt 28 Seiten
XC-IS22CD Datasheet, Funktion
www.DataSheet4U.com
CD TUNER DECK
XC-IS22CD
STEREO POWER AMPLIFIER
www.MDat-aSIShee2t42U.com
SPEAKER SYSTEM
S-IS22
Operating Instructions
www.DataSheet4U.com






XC-IS22CD Datasheet, Funktion
www.DataSheet4U.com
2 Connecting up
The rear panel
The illustration on this page shows the XC-IS22CD.
Main unit
1 Right speaker
2 Power amplifier
3 CD tuner deck
4 Left speaker
5 Line 1 IN/OUT jacks
6 Optional cassette deck connection (CT-IS21)
Accessories
7 AM antenna
8 RCA pin-plug stereo cable
9 FM antenna
10 System cable
11 Speaker cords
12 AC power cord
Important
Before making or changing any rear panel connections, make
sure that all the components are switched off and unplugged
from the power supply.
Speaker caution!
Do not connect any of the supplied speakers to any other
amplifier. This may result in malfunction or fire.
These speakers are not magnetically shielded, and may cause
color noise or distortion when placed near a television set. If this
occurs, move the speakers farther away.
www.DataSheet4U.com
UK model
Connecting the system components
1 Use the supplied system cable to connect the TO
AMPLIFIER jack on the CD Tuner Deck to the XC-
IS22CD jack on the power amplifier (see right).
2 Use the supplied RCA pin-plug stereo cable to
connect the AUDIO OUT jacks on the CD Tuner
IN
Deck to the L and R jacks on the power amplifier (see
right).
RL
Connect the white plug to the L (left) jack at either end, and the
TO XC-IS22CD
red plug to the R (right) jack. Make sure the plugs are pushed in
completely.
Power Amplifier
6
En
CD Tuner Deck
RL
AUDIO
OUT
IN
LINE 1
OUT
TO
AMPLIFIER
www.DataSheet4U.com

6 Page









XC-IS22CD pdf, datenblatt
www.DataSheet4U.com
4 Getting started
POWER AMPLIFIER M-IS22
AERO DUCT CONSTRUCTION
OPEN/
CLOSE
STEREO CDTUNER DECK XC-IS22CD
STANDBY/ON
STANDBY
PHONES
CD
ENHANCE
2 VOL. /JOG + 3
DISP SET
·TUNING
+ TUNING
TAPE
FOLDER/TRACK
BASS
TUNER
!DOONL/OBFYFN(DREMO)
STOP 7
ASES
PL
6
REC/STOP
FRONT LOADINGTRAY MECHANISM DECK
TREBLE
LINE1.2
TAPE
OPEN/CLOSE
LINE2 IN OPTICAL DIGITAL OUT LINE2 OUT
0
Switching on and setting the Changing the clock format
clock
You should now have your system installed with everything
connected up and plugged in. After switching on, the first thing
You can choose to display the clock in either 12 or 24 hour
formats. The default is 12 hour display format.
1 Switch the system into standby.
to do is to set the clock. This only needs to be done once (unless 2 Press and hold REVERSE MODE for 3 seconds.
all power to the unit is cut) and will enable you to use the timer
features.
www.DataSheet4U.comUse the front panel controls to do this.
3 Turn the JOG dial to select the clock format.
The clock format is shown in the display.
1 Press STANDBY/ON
4 Press SET to confirm.
The system returns to standby.
2 Press TIMER/CLOCK ADJ.
3 Turn the JOG dial until CLK ADJ (clock adjust)
appears in the display.
If this is the first time you’ve switched on the unit, CLK ADJ
should already be displayed.
4 Press SET.
5 Use the JOG dial to set the hour.
6 Press SET.
7 Use the JOG dial to set the minute.
Automatic power on buttons
There are a number of buttons other than STANDBY/ON
which will switch the unit on.
CD, TUNER, TAPE, and LINE 1.2 switch the unit on directly in
to that function. (In the case of CD and TAPE, if there is a CD/
tape loaded it will start playing.)
OPEN/CLOSE touch sensor on the front panel (CD 0 on the
remote) switches the unit on and opens the CD cover.
6 switches the unit on and starts playing the last selected
function.
8 Press SET to finish.
• Press DISP/RDS (DISP on the remote) anytime to cycle
through display options to show the current time. See
Changing displays on page 16 for more on this.
12
En
www.DataSheet4U.com

12 Page





SeitenGesamt 28 Seiten
PDF Download[ XC-IS22CD Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
XC-IS22CDCD Tuner DeckPioneer
Pioneer

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche