|
|
PDF PX1002 Data sheet ( Hoja de datos )
| Número de pieza | PX1002 | |
| Descripción | Designed for TDMA IS-54 Receiver IF Applications | |
| Fabricantes | RF Monolithics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de PX1002 (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
®
• Designed for TDMA IS-54 Receiver IF Applications
• Low Insertion Loss
• Excellent Selectivity
• Hermetic 13.3 X 6.5 mm Surface-Mount Case
• Unbalanced Input and Output
• Complies with Directive 2002/95/EC (RoHS) Pb
PX1002
86.85 MHz
SAW Filter
Absolute Maximum Ratings
Rating
Maximum Incident Power in Passband
Max. DC voltage between any 2 terminals
Storage Temperature Range
Suitable for lead-free soldering - Max Soldering Profile
Electrical Characteristics
Characteristic
Nominal Center Frequency
Passband
Insertion Loss at fc
3 dB Passband
Amplitude Ripple over fc ±15 kHz
Group Delay Variation over fc ±10 kHz
Third-Order Intermod. for -20 dBm tones at fc ±60 & 120 kHz
Rejection
fc ±60 kHz
fc -880 kHz to fc -940 kHz
Ultimate
Operating Temperature Range
Value
Units
+10 dBm
30 VDC
-40 to +85
°C
260°C for 30 s
Sym
fC
IL
BW3
GDV
Notes
1
1, 2
1, 2, 3
TA 1
Min
±12
11
65
-20
SM13365-12
Typ
86.850
3
±25
16
65
Max
4.0
1.0
6.0
-95
+70
Units
MHz
dB
kHz
dBP-P
µsP-P
dBm
dB
°C
Impedance Matching to 50 Ω unbalanced
Case Style
Lid Symbolization (YY=year, WW=week) See note 4
External L-C
SM13365-12 13.3 X 6.5 mm Nominal Footprint
RFM PX1002 YYWW
Electrical Connections
Connection
Port 1Hot
Port 1 Gnd Return
Port 2 Hot
Port 2 Gnd Return
Case Ground
Terminals
2
3
8
9
All Others
Notes:
1. Unless noted otherwise, all specifications apply over the operating temperature
range with filter soldered to the specified demonstration board with impedance
matching to 50 Ω and measured with 50 Ω network analyzer.
2. Unless noted otherwise, all frequency specifications are referenced to the nom-
inal center frequency, fc.
3. Rejection is measured as attenuation below the minimum IL point in the pass-
band. Rejection in final user application is dependent on PCB layout and exter-
nal impedance matching design. See Application Note No. 42 for details.
4. "LRIP" or "L" after the part number indicates "low rate initial production" and
www.DataSheet4U.com"ENG" or "E" indicates "engineering prototypes."
5. The design, manufacturing process, and specifications of this filter are subject
to change.
6. Either Port 1 or Port 2 may be used for either input or output in the design.
However, impedances and impedance matching may vary between Port 1 and
Port 2, so that the filter must always be installed in one direction per the circuit
design.
7. US and international patents may apply.
8. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of
RF Monolithics, Inc.
9. ©Copyright 1999, RF Monolithics Inc.
10. Electrostatic Sensitive Device. Observe precautions for handling.
RF Monolithics, Inc. Phone: (972) 233-2903
Fax: (972) 387-8148
RFM Europe
Phone: 44 1963 251383
Fax: 44 1963 251510
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
E-mail: [email protected]
http://www.rfm.com
PX1002 112904
1 page  
www.DataSheet4U.com
www.DataSheet4U.com
5 Page | ||
| Páginas | Total 10 Páginas | |
| PDF Descargar | [ Datasheet PX1002.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| PX1002 | Designed for TDMA IS-54 Receiver IF Applications | RF Monolithics |
| PX1004 | 82.2 MHz SAW Filter | RF Monolithics |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |