Datenblatt-pdf.com


HO4002-1 Schematic ( PDF Datasheet ) - RF Monolithics

Teilenummer HO4002-1
Beschreibung 400.0 MHz SAW Oscillator
Hersteller RF Monolithics
Logo RF Monolithics Logo 




Gesamt 2 Seiten
HO4002-1 Datasheet, Funktion
( DataSheet : www.DataSheet4U.com )
Preliminary
®
• SAW Frequency Stabilization
• Fundamental-Mode Oscillation at 400.0 MHz
• A Rugged, Compact General-Purpose Oscillator
The frequency of this oscillator is stabilized by surface-acoustic-wave (SAW) technology. This results in ex-
cellent performance from a compact, rugged, oscillator operating at the fundamental frequency of 400.0 MHz.
The high-reliability of the HO4002-1 makes it suitable for general purpose use in a wide variety of applications.
HO4002-1
400.0 MHz
SAW
Oscillator
Absolute Maximum Ratings
Rating
DC Supply Voltage
Case Temperature
Powered
Storage
Value
0 to +13
-40 to +70
-40 to +85
Units
VDC
°C
Dip 16-8 Case
Electrical Characteristics
Characteristic
Operating Frequency AbsoluteFrequency
Tune Range
Tune Voltage
Tuning Linearity
RF Output Power
Discrete Spurious
Second Harmonics
Third and Higher Harmonics
SSB Phase Noise
Nonharmonic
1 kHz Offset
10 kHz Offset
100 kHz Offset
RF Impedance
Nominal Impedance
DC Power Supply
Operating Load VSWR
Operating Voltage
Operating Current
Operating Case Temperature
Lid Symbolization (YY=Year, WW=Week)
Sym
fO
Notes
1, 7
PO 3, 6
2, 3, 4
ZO 3
GL 3, 5
VCC 3, 6
ICC
TC 3, 6
CAUTION: Electrostatic Sensitive Device. Observe precautions for
handling. COCOM CAUTION: Approval by the U.S. Department of
Commerce is required prior to export of this device.
Notes:
1. One or more of the following United States patents apply: 4,616,197; 4,610,681; and
4,761,616.
2. Unless noted otherwise, all specifications are listed at TC = +25°C ±2°C, VCC = nom-
inal voltage ±0.01 VDC, and load impedance = 50 with VSWR 1.5:1.
3. The design, manufacturing process , and specification of this device are subject to
change without notice.
4. Applies to oscillator only and not to sidebands caused by external electrical or
mechanical sources. (Dedicated external voltage regulation with low-frequency filter-
ing for the DC power supply and proper circuit board layout are recommended for
optimum spectral purity.)
5. For specified maximum operating load VSWR (any angle) at FO. (No instability or
damage will occur for any passive load impedance.)
6. For any combination of VCC and TC within the specified operating ranges.
7. Applies for any combination of Note 5 and 6 conditions.
Minimum
399.960
0
+7
Typical
400.00
3:1
+10
-80
-100
-130
-150
50
10.8 12
-20
RFM HO4002-1 YYWW
BLOCK DIAGRAM
V CC
Maximum
400.040
+10
4:1
-15
-20
-95
-125
Units
MHz
MHz
VDC
dBm
dBc
dBc/Hz
2:1
13.2
45
+70
VDC
mA
°C
SAW Oscillator
RF OUTPUT
Buffer Amplifier
ELECTRICAL CONNECTIONS
VCC 1
Case Ground 2
Vtune
15 Case Ground
Top
View
Case Ground 7
RF Output 8
10 Case Ground
9 VCC
RF Monolithics, Inc. Phone: (972) 233-2903
Fax: (972) 387-8148
RFM Europe
Phone: 44 1963 251383
Fax: 44 1963 251510
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
www.DataSheet4U.com
http://www.rfm.com
HO4002-1-043003
Page 1 of 2





SeitenGesamt 2 Seiten
PDF Download[ HO4002-1 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
HO4002-1400.0 MHz SAW OscillatorRF Monolithics
RF Monolithics

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche