Datenblatt-pdf.com


SL-67EV1 Schematic ( PDF Datasheet ) - Soltek

Teilenummer SL-67EV1
Beschreibung Notice To End User
Hersteller Soltek
Logo Soltek Logo 




Gesamt 30 Seiten
SL-67EV1 Datasheet, Funktion
( DataSheet : www.DataSheet4U.com )
NOTICE TO END USER
This User’s Guide & Technical Reference is for assisting system
manufacturers and end-users in setting up and installing the
mainboard.
Every effort has been made to ensure that the information in this
manual is accurate. Soltek Computer Inc. is not responsible for
printing or clerical errors. Information in this document is subject to
change without notice and does not represent a commitment on
the part of Soltek Computer Inc.
No part of this manual may be reproduced, transmitted, translated
into any language in any form or by any means, electronic or
mechanical, including photocopying and recording, for any purpose
without the express written permission of Soltek Computer Inc.
Companies and products mentioned in this manual are for identifi-
cation purpose only. Product names appearing in this manual may
or may not be registered trademarks or copyrights of their respec-
tive companies.
Soltek Computer Inc. Provides this manual “AS IS” without war-
ranty of any kind, either express or implied, including but not limited
to the implied warranties or conditions of merchantability or fitness
for a particular purpose. In no event shall Soltek Computer Inc. Be
liable for any loss or profits, loss of business, loss of use or data,
interruption of business, or for indirect, special, incidental, or con-
sequential damages of any kind, even if Soltek Computer Inc. Has
been advised of the possibility of such damages arising from any
defect or error in this manual or product.
© Copyright 2000 Soltek Computer Inc.
All rights reserved
Model : SL-67EV1
Edition : April, 2000
Version : 2.0
http://www.soltek.com.tw
www.DataSheet4U.com
www.DataSheet4U.com






SL-67EV1 Datasheet, Funktion
67EV1
1-8 MOTHERBOARD LAYOUT
• DEFAULT SETTING: Celeron 300/66MHz, Pentium II / Pentium !!! 450/
100MHz.
JP2
13
ATX POWER
VIA
693A
1
JP7
3
SFAN1
CFAN1
AGP
JVGA1
PCI 1
PCI 2
SW1
ON DIP
123456
3
PCI 3 JBAT1
1
Li
Battery
PCI 4
PCI 5
VIA
596B
ISA 1
3
JP6
1
PFAN1
ISA 2
NOTE: FOR 100 / 133MHz CPU ENVIRONMENT, THE SDRAM MUST COMPLY WITH PC-100 / PC-
133 SPEC.
6

6 Page









SL-67EV1 pdf, datenblatt
67EV1
2-4.1 J2 SWITCH SIGNAL SUMMARY
J2
HDD LED Connector
N.C.
Infrared Connector
N.C.
Power Switch
Sleep Switch
Pin Signal Description
1 +5V
2 HDD LED Signal
3 HDD LED Signal
4 +5V
5 Empty
6 Infrared Transmit Signal
7 GND
8
Infrared Receive Signal¤
(Low Speed)
9
Infrared Receive Signal¤
(High Speed)
10 +5V
11 Empty
12 GND
13 Power Switch for ATX
14 GND
15 Sleep Signal
HDD INDICATOR LED (PIN1 ~ PIN4)
• This connector connects with the hard disk indicator LED on the case.
INFRARED PORT MODULE CONNECTOR (PIN6 ~ PIN10)
• The system board provides a 5-pin infrared connector for an optional wire-
less transmitting and receiving module. Pin 6 through pin 10 are Transmit,
GND, Receive (low speed), Receive (high speed) and Vcc, respectively.
POWER SWITCH (PIN12 ~ PIN13)
• Toggle pin 12 and pin 13 for turning ON/OFF of the power supply. (For ATX
power only)
SLEEP SWITCH (PIN14 ~ PIN15)
• Toggle this jumper forces the system to sleep and the system won’t wake
up until the hardware event is coming. (The BIOS Power Management
setting must be ENABLED)
12

12 Page





SeitenGesamt 30 Seiten
PDF Download[ SL-67EV1 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
SL-67EV1Notice To End UserSoltek
Soltek

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche