QFBR-5611 Datasheet PDF - Agilent Technologies
| Part Number | QFBR-5611 | |
| Description | (QFBR-5601 / QFBR-5611) Gigabit Interface Converters (GBIC) | |
| Manufacturers | Agilent Technologies | |
| Logo |  |
|
|
There is a preview and QFBR-5611 download ( pdf file ) link at the bottom of this page. Total 14 Pages | ||
Preview 1 page No Preview Available !
AgilentHFBR-5601/HFCT-5611
Gigabit Interface Converters
(GBIC) for Gigabit Ethernet
Data Sheet
Description
The HFBR-56xx/HFCT-56xx
family of interface converters
meet the Gigabit Interface
Converter specification Rev. 5.4,
an industry standard. The family
provides a uniform form factor for
a wide variety of standard
connections to transmission
media. The converters can be
inserted or removed from a host
chassis without removing power
from the host system.
The converters are suitable for
interconnections in the Gigabit
Ethernet hubs and switches
environment. The design of these
converters is also practical for
other high performance, point-to-
point communication requiring
gigabit interconnections. Since
the converters are hot-pluggable,
they allow system configuration
changes simply by plugging in a
different type of converter.
The mechanical and electrical
interfaces of these converters to
the host system are identical for
all implementations of the
converter regardless of external
media type. A 20-pin connector is
used to connect the converter to
the host system. Surge currents
are eliminated by using pin
sequencing at this connector and
a slow start circuit. Two ground
tabs at this connector also make
contact before any other pins,
discharging possible component-
damaging static electricity. In
addition, the connector itself
performs a two-stage contact
sequence. Operational signals and
power supply ground make
contact in stage 1 while power
makes contact in stage 2.
The HFBR-5601 has been
developed with 850 nm short
wavelength VCSEL technology
while the HFCT-5611 is based on
1300 nm long wavelength Fabry
Perot laser technology.
Features
• Compliant with Gigabit Interface
Converter specification Rev. 5.4 (1)
• HFBR-5601 is compliant with
proposed specifications for
IEEE 802.3z/D5.0 Gigabit Ethernet
(1000 Base-SX)
• HFCT-5611 is compliant with the
ANSI 100-SM-LC-L revision 2
10 km link specification
• Performance:
HFBR-5601:
500 m with 50/125 µm MMF
220 m with 62.5/125 µm MMF
HFCT-5611:
550 m with 50/125 µm MMF
550 m with 62.5/125 µm MMF
10 km with 9/125 µm SMF
• Horizontal or vertical installation
• AEL Laser Class 1 eye safe per
IEC 60825-1
• AEL Laser Class I eye safe per
US 21 CFR
• Hot-pluggable
Applications
• Switch to switch interface
• High speed I/O for file servers
• Bus extension applications
Related Products
• 850 nm VCSEL, 1 x 9 and SFF
transceivers for 1000 base
SX applications (HFBR-53D5,
HFBR-5912E)
• 1300 nm, 1 x 9 Laser transceiver
for 1000 base-LX applications
(HFCT-53D5)
• Physical layer ICs available for
optical interface
(HDMP-1636A/46A)
www.DataSheet4U.com
www.DataSheet4U.com
www.DataSheet4U.com
|
| |
 
Figure 1. Outline Drawing of HFBR-5601 and HFCT-5611.
5
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for QFBR-5611 electronic component. |
| Information | Total 14 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ QFBR-5611.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| QFBR-5611 | The function is (QFBR-5601 / QFBR-5611) Gigabit Interface Converters (GBIC). Agilent Technologies | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
QFBR
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||