Datenblatt-pdf.com


AQ1 Schematic ( PDF Datasheet ) - NEC

Teilenummer AQ1
Beschreibung on-chip resistor NPN silicon epitaxial transistor
Hersteller NEC
Logo NEC Logo 




Gesamt 6 Seiten
AQ1 Datasheet, Funktion
DATA SHEET
COMPOUND TRANSISTOR
AQ1 SERIES
on-chip resistor NPN silicon epitaxial transistor
For mid-speed switching
FEATURES
• High current drives such as IC and motor solenoid available up
to 2 A
• On-chip bias resistor
• Low power consumption during drive
PACKAGE DRAWING (UNIT: mm)
AQ1 SERIES LISTS
Products
AQ1L2N
AQ1A3M
AQ1F3M
AQ1F3P
AQ1L2Q
AQ1F2Q
AQ1A4A
R1 (K)
0.47
1.0
2.2
2.2
0.47
0.22
R2 (K)
1.0
1.0
2.2
10
4.7
2.2
10
Electrode Connection
1. Emitter EIAJ : SC-43B
2. Collector JEDEC: TO-92
3. Base IEC : PA33
ABSOLUTE MAXIMUM RATINGS (Ta = 25°C)
Parameter
Symbol
Ratings
Unit
Collector to base voltage
VCBO
20
V
Collector to emitter voltage
VCEO
20
V
Emitter to base voltage
VEBO
10
V
Collector current (DC)
IC(DC)
2.0
A
Collector current (Pulse)
IC(pulse) *
3.0
A
Base current (DC)
IB(DC)
0.04
A
Total power dissipation
PT
750
mW
Junction temperature
Tj
150
°C
Storage temperature
Tstg 55 to +150
°C
* PW 10 ms, duty cycle 50 %
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
Document No. D10840EJ2V0DS00 (2nd edition)
Date Published April 2002 N CP(K)
Printed in Japan
©
21090928






AQ1 Datasheet, Funktion
AQ1 SERIES
The information in this document is current as of July, 2001. The information is subject to change
without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data
books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products
and/or types are available in every country. Please check with an NEC sales representative for
availability and additional information.
No part of this document may be copied or reproduced in any form or by any means without prior
written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document.
NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of
third parties by or arising from the use of NEC semiconductor products listed in this document or any other
liability arising from the use of such products. No license, express, implied or otherwise, is granted under any
patents, copyrights or other intellectual property rights of NEC or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of customer's equipment shall be done under the full
responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third
parties arising from the use of these circuits, software and information.
While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers
agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize
risks of damage to property or injury (including death) to persons arising from defects in NEC
semiconductor products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment, and anti-failure features.
NEC semiconductor products are classified into the following three quality grades:
"Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products
developed based on a customer-designated "quality assurance program" for a specific application. The
recommended applications of a semiconductor product depend on its quality grade, as indicated below.
Customers must check the quality grade of each semiconductor product before using it in a particular
application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's
data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not
intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness
to support a given application.
(Note)
(1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries.
(2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for
NEC (as defined above).
M8E 00. 4

6 Page







SeitenGesamt 6 Seiten
PDF Download[ AQ1 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
AQ-BRELAYSPanasonic
Panasonic
AQ1on-chip resistor NPN silicon epitaxial transistorNEC
NEC
AQ1RELAYPanasonic
Panasonic
AQ2A1-C1-T12VDCRELAYSPanasonic
Panasonic
AQ2A1-C1-T12VDCSOLID STATE RELAYNais
Nais

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche