Datenblatt-pdf.com


EXB1xxxx Schematic ( PDF Datasheet ) - Panasonic

Teilenummer EXB1xxxx
Beschreibung (EXB Series) Chip Resistor Array
Hersteller Panasonic
Logo Panasonic Logo 




Gesamt 6 Seiten
EXB1xxxx Datasheet, Funktion
.comChip Resistor Array
UType: EXB1 : 0201 Array
t4EXB2 : 0402 Array
eeEXB3 : 0603 Array
hEXBN : 0402 Array
taSEXBV : 0603 Array
aEXBS : 0805 Array
.Dn Features
wl High density
w2 resistors in 0.8 mm ´ 0.6 mm size
w 4 resistors in 1.4 mm ´ 0.6 mm size
(EXB14V)
(EXB18V)
Chip Resistor Array
2 resistors in 1.0 mm ´ 1.0 mm size
4 resistors in 2.0 mm ´ 1.0 mm size
8 resistors in 3.8 mm ´ 1.6 mm size
m2 resistors in 1.6 mm ´ 1.6 mm size
o4 resistors in 3.2 mm ´ 1.6 mm size
4 resistors in 5.1 mm ´ 2.2 mm size
(EXB24V)
(EXB28V, N8V)
(EXB2HV)
(EXB34V, V4V)
(EXB38V, V8V)
(EXBS8V)
.cl Improvement of placement efficiency
Placement efficiency of Chip Resistor Array is two, four or eight times of the flat type chip resistor
Un Explanation of Part Numbers
t41 2 3 4 5 6 7 8 9 10 11
eE X B V 8 V 4 7 2 J V
heProduct Code
Thick Film
Chip Resistor
taSNetworks
Chip Resistor Array
Type: inches
1 0201 Array
2 0402 Array
3 0603 Array
Convex Terminal
N 0402 Array
V 0603 Array Concave Terminal
S 0805 Array
No. of Terminal
4 4 Terminal
8 8 Terminal
H 16 Terminal
www.Dan Construction (Example : Concave Terminal)
Schematics
Isolated
V
type
Resistance Value
The first two digits are
significant figures of
resistance value and
the third one denotes
the number of zeros
following. Jumper is
expressed by R00
Example: 222: 2.2 k 9
Resistance
Tolerance
J ±5 %
0 Jumper
n Schematics
l Isolated type
Packaging Methods
Code
Packaging
Embossed
Nil Carrier Taping
(S8V)
Punched Carrier Taping
X 2 mm pitch
(14V, 18V, 24V, 28V, N8V)
Punched Carrier Taping
V 4 mm pitch
(2HV, 34V, 38V, V4V, V8V)
14V, 24V, 34V, V4V 18V, 28V, N8V, 38V, V8V, S8V
2 resistors
"!
4 resistors
&%$#
Protective coating
2HV U.comAlumina substrate
8 resistors et4Thick film
resistive element
Electrode (Outer)
Electrode (Between)
heElectrode (Inner)

$ # " !    '
ataS ! " # $ % &
w.DDesign and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or us
wwShould a safety concern arise regarding this product, please be sure to contact us immediately.
!"
e.






EXB1xxxx Datasheet, Funktion
Caution for Safety
(Common precautions for Fixed Resistors)
¥ When using our products, no matter what sort of equipment they might be used for, be sure to make a written
agreement on the specifications with us in advance. The design and specifications in this catalog are subject
to change without prior notice.
¥ Do not use the products beyond the specifications described in this catalog.
¥ This catalog explains the quality and performance of the products as individual components. Before use, check
and evaluate their operations when installed in your products.
¥ Install the following systems for a failsafe design to ensure safety if these products are to be used in equipment
where a defect in these products may cause the loss of human life or other significant damage, such as damage to
vehicles (automobile, train, vessel), traffic lights, medical equipment, aerospace equipment, electric heating
appliances, combustion/gas equipment, rotating equipment, and disaster/crime prevention equipment.
] Systems equipped with a protection circuit and a protection device
] Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault
(1) Precautions for use
¥ These products are designed and manufactured for general purpose and standard use in general electronic
equip ment (e.g. AV equipment, home electric appliances, office equipment, information and communication
equipment)
¥ These products are not intended for use in the following special conditions. Before using the products,
carefully check the effects on their quality and performance, and determine whether or not they can be used.
1. In liquid, such as water, oil, chemicals, or organic solvent
2. In direct sunlight, outdoors, or in dust
3. In salty air or air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2
4. In an environment where strong static electricity or electromagnetic waves exist
5. In an environment where these products cause dew condensation
6. Sealing or coating of these products or a printed circuit board on which these products are mounted, with
resin or other materials
¥ These products generate Joule heat when energized. Carefully position these products so that their heat will
not affect the other components.
¥ Carefully position these products so that their temperatures will not exceed the category temperature range due
to the effects of neighboring heat-generating components. Do not mount or place heat-generating components
or inflammables, such as vinyl-coated wires, near these products .
¥ Note that non-cleaning solder, halogen-based highly active flux, or water-soluble flux may deteriorate the
perfor mance or reliability of the products.
¥ Carefully select a flux cleaning agent for use after soldering. An unsuitable agent may deteriorate the performance
or reliability. In particular, when using water or a water-soluble cleaning agent, be careful not to leave water
residues. Otherwise, the insulation performance may be deteriorated.
(2) Precautions for storage
The performance of these products, including the solderability, is guaranteed for a year from the date of arrival
at your company, provided that they remain packed as they were when delivered and stored at a temperature
of 5 ¡C to 35 ¡C and a relative humidity of 45 % to 85 %.
Even within the above guarantee periods, do not store these products in the following conditions. Otherwise,
their electrical performance and/or solderability may be deteriorated, and the packaging materials (e.g. taping
materials) may be deformed or deteriorated, resulting in mounting failures.
1. In salty air or in air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2
2. In direct sunlight
<Package markings>
Package markings include the product number, quantity, and country of origin.
In principle, the country of origin should be indicated in English.
– ER3 –

6 Page







SeitenGesamt 6 Seiten
PDF Download[ EXB1xxxx Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
EXB1xxxx(EXB Series) Chip Resistor ArrayPanasonic
Panasonic
EXB1xxxx(EXBx Series) Chip Resistor ArrayPanasonic
Panasonic

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche