|
|
PDF MT58L256L36P Data sheet ( Hoja de datos )
| Número de pieza | MT58L256L36P | |
| Descripción | (MT58Lxxxx) 8Mb SYNCBURST SRAM | |
| Fabricantes | Micron Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MT58L256L36P (archivo pdf) en la parte inferior de esta página. Total 27 Páginas | ||
|
No Preview Available !
om 8Mb: 512K x 18, 256K x 32/36
.c PIPELINED, SCD SYNCBURST SRAM
et4U ™ MT58L512L18P, MT58L256L32P, MT58L256L36P;
8Mb SYNe CBURST MT58L512V18P, MT58L256V32P, MT58L256V36P
h 3.3V VDD, 3.3V or 2.5V I/O, Pipelined, Single-Cycle
SRAM S Deselect
.DataFEATURES
w• Fast clock and OE# access times
w• Single +3.3V +0.3V/-0.165V power supply (VDD)
w• Separate +3.3V or +2.5V isolated output buffer
supply (VDDQ)
m• SNOOZE MODE for reduced-power standby
o• Single-cycle deselect (Pentium® BSRAM-compatible)
• Common data inputs and data outputs
.c• Individual BYTE WRITE control and GLOBAL
WRITE
• Three chip enables for simple depth expansion
Uand address pipelining
• Clock-controlled and registered addresses, data
t4I/Os and control signals
• Internally self-timed WRITE cycle
• Burst control (interleaved or linear burst)
e• Automatic power-down for portable applications
e• 100-pin TQFP package
• 165-pin FBGA package
h• Low capacitive bus loading
• x18, x32, and x36 versions available
SOPTIONS
ta• Timing (Access/Cycle/MHz)
3.5ns/6ns/166 MHz
4.0ns/7.5ns/133 MHz
a5ns/10ns/100 MHz
• Configurations
.D3.3V I/O
512K x 18
256K x 32
256K x 36
w2.5V I/O
512K x 18
w256K x 32
256K x 36
w m• Packages
.co100-pin TQFP (2-chip enable)
100-pin TQFP (3-chip enable)
U165-pin, 13mm x 15mm FBGA
t4• Operating Temperature Range
eCommercial (0°C to +70°C)
eIndustrial (-40°C to +85°C)**
MARKING
-6
-7.5
-10
MT58L512L18P
MT58L256L32P
MT58L256L36P
MT58L512V18P
MT58L256V32P
MT58L256V36P
T
S
F*
None
IT
hPart Number Example:
ataSMT58L512L18PT-6
100-Pin TQFP1
165-Pin FBGA
NOTE: 1. JEDEC-standard MS-026 BHA (LQFP).
* A Part Marking Guide for the FBGA devices can be found on Micron’s
Web site—http://www.micron.com/support/index.html.
** Industrial temperature range offered in specific speed grades and
configurations. Contact factory for more information.
GENERAL DESCRIPTION
The Micron® SyncBurst™ SRAM family employs
high-speed, low-power CMOS designs that are fabri-
cated using an advanced CMOS process.
Micron’s 8Mb SyncBurst SRAMs integrate a 512K x
18, 256K x 32, or 256K x 36 SRAM core with advanced
synchronous peripheral circuitry and a 2-bit burst
counter. All synchronous inputs pass through registers
controlled by a positive-edge-triggered single-clock in-
put (CLK). The synchronous inputs include all ad-
dresses, all data inputs, active LOW chip enable (CE#),
two additional chip enables for easy depth expansion
(CE2, CE2#), burst control inputs (ADSC#, ADSP#,
ADV#), byte write enables (BWx#) and global write
ww.D8Mb: 512K x 18, 256K x 32/36 Pipelined, SCD SyncBurst SRAM
wMT58L512L18P_C.p65 – Rev. 2/02
1 Micron Technology, Inc., reserves the right to change products or specifications without notice.
©2002, Micron Technology, Inc.
1 page  
8Mb: 512K x 18, 256K x 32/36
PIPELINED, SCD SYNCBURST SRAM
PIN ASSIGNMENT (TOP VIEW)
100-PIN TQFP, 2-CHIP ENABLE,
T VERSION
SA
SA
ADV#
ADSP#
ADSC#
OE#
BWE#
GW#
CLK
VSS
VDD
SA
BWa#
BWb#
NC
NC
CE2
CE#
SA
SA
80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51
81 50
82 49
83 48
84 47
85 46
86 45
87 44
88 43
89 42
x1890 41
91 40
92 39
93 38
94 37
95 36
96 35
97 34
98 33
99 32
100 31
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
SA
SA
SA
SA
SA
SA
SA
NF
NF
VDD
VSS
DNU
DNU
SA0
SA1
SA
SA
SA
SA
MODE
SA
SA
ADV#
ADSP#
ADSC#
OE#
BWE#
GW#
CLK
VSS
VDD
SA
BWa#
BWb#
BWc#
BWd#
CE2
CE#
SA
SA
80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51
81 50
82 49
83 48
84 47
85 46
86 45
87 44
88 43
89 42
x32/x3690 41
91 40
92 39
93 38
94 37
95 36
96 35
97 34
98 33
99 32
100 31
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
SA
SA
SA
SA
SA
SA
SA
NF
NF
VDD
VSS
DNU
DNU
SA0
SA1
SA
SA
SA
SA
MODE
*No Function (NF) is used on the x32 version. Parity (DQPx) is used on the x36 version.
8Mb: 512K x 18, 256K x 32/36 Pipelined, SCD SyncBurst SRAM
MT58L512L18P_C.p65 – Rev. 2/02
5 Micron Technology, Inc., reserves the right to change products or specifications without notice.
©2002, Micron Technology, Inc.
5 Page 
8Mb: 512K x 18, 256K x 32/36
PIPELINED, SCD SYNCBURST SRAM
FBGA PIN DESCRIPTIONS (continued)
x18 x32/x36 SYMBOL TYPE
DESCRIPTION
9A 9A ADV# Input Synchronous Address Advance: This active LOW input is used to
advance the internal burst counter, controlling burst access after
the external address is loaded. A HIGH on ADV# effectively causes
wait states to be generated (no address advance). To ensure use of
correct address during a WRITE cycle, ADV# must be HIGH at the
rising edge of the first clock after an ADSP# cycle is initiated.
9B 9B ADSP# Input Synchronous Address Status Processor: This active LOW input
interrupts any ongoing burst, causing a new external address to be
registered. A READ is performed using the new address,
independent of the byte write enables and ADSC#, but dependent
upon CE#, CE2 and CE2#. ADSP# is ignored if CE# is HIGH. Power-
down state is entered if CE2 is LOW or CE2# is HIGH.
8A 8A ADSC# Input Synchronous Address Status Controller: This active LOW input
interrupts any ongoing burst, causing a new external address to be
registered. A READ or WRITE is performed using the new address if
CE# is LOW. ADSC# is also used to place the chip into power-down
state when CE# is HIGH.
1R 1R MODE Input Mode: This input selects the burst sequence. A LOW on this input
(LB0#)
selects “linear burst.” NC or HIGH on this input selects “interleaved
burst.” Do not alter input state while device is operating.
(a) 10J, 10K, (a) 10J, 10K,
10L, 10M, 11D, 10L, 10M, 11J,
11E, 11F, 11G 11K, 11L, 11M
(b) 1J, 1K, (b) 10D, 10E,
1L, 1M, 2D, 10F, 10G, 11D,
2E, 2F, 2G 11E, 11F, 11G
(c) 1D, 1E,
1F, 1G, 2D,
2E, 2F, 2G
(d) 1J, 1K, 1L,
1M, 2J, 2K,
2L, 2M
DQa
DQb
DQc
DQd
Input/ SRAM Data I/Os: For the x18 version, Byte “a” is associated DQa’s;
Output Byte “b” is associated with DQb’s. For the x32 and x36 versions,
Byte “a” is associated with DQa’s; Byte “b” is associated with DQb's;
Byte “c” is associated with DQc’s; Byte “d” is associated with DQd’s.
Input data must meet setup and hold times around the rising edge
of CLK.
11C 11N NF/DQPa NF/ No Function/Parity Data I/Os: On the x32 version, these are No
1N 11C NF/DQPb I/O Function (NF). On the x18 version, Byte “a” parity is DQPa; Byte “b”
–
1C NF/DQPc
parity is DQPb. On the x36 version, Byte “a” parity is DQPa; Byte
–
1N NF/DQPd
“b” parity is DQPb; Byte “c” parity is DQPc; Byte “d” parity is DQPd.
1H, 4D, 4E, 4F, 1H, 4D, 4E, 4F,
4G, 4H, 4J, 4G, 4H, 4J,
4K, 4L, 4M, 4K, 4L, 4M,
8D, 8E, 8F, 8D, 8E, 8F,
8G, 8H, 8J, 8G, 8H, 8J,
8K, 8L, 8M 8K, 8L, 8M
VDD
Supply Power Supply: See DC Electrical Characteristics and Operating
Conditions for range.
(continued on next page)
8Mb: 512K x 18, 256K x 32/36 Pipelined, SCD SyncBurst SRAM
MT58L512L18P_C.p65 – Rev. 2/02
11
Micron Technology, Inc., reserves the right to change products or specifications without notice.
©2002, Micron Technology, Inc.
11 Page | ||
| Páginas | Total 27 Páginas | |
| PDF Descargar | [ Datasheet MT58L256L36P.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MT58L256L36D | (MT58Lxxxx) 8Mb SYNCBURST SRAM | Micron Semiconductor |
| MT58L256L36F | (MT58Lxxxx) 8Mb SYNCBURST SRAM | Micron Semiconductor |
| MT58L256L36P | (MT58Lxxxx) 8Mb SYNCBURST SRAM | Micron Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |