|
|
Número de pieza | MM1573x | |
Descripción | (MM157xx) 150mA Regulator | |
Fabricantes | Mitsumishi | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de MM1573x (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
No Preview Available ! MITSUMI
150mA Regulator
Monolithic IC MM157
150mA Regulator MM157 N, 161 N
N, 161 N
Outline
This IC is an ultra-small, low noise, stable power supply that supports ceramic capacitors (low ESR) Output
current goes up to 150mA, and use of a noise pin reduces output noise even further.
Output ON/OFF can be controlled with the ON/OFF pin.
Features
1. I/O voltage difference
0.10V typ. (IO=50mA)
2. Output noise voltage
30µVrms typ. (Cn=0.01µF)
3. Recommended maximum output current 150mA max.
4. No-load current consumption
85µA typ.
5. Built-in overcurrent protection and thermal shutdown circuits
6. Output voltage rank
1.8 ~ 5.0V (0.1V steps)
7. Output ON/OFF control function
High: ON, Low: OFF
Package
SOT-25A (MM157 N, MM161 N)
* contains the output voltage rank.
Applications
1. Cordless telephone
2. Cellular telephone, PHS
3. Portable MD
4. Other battery-powered portable equipment
Pin Assignment
MM157 N
5
41
VIN
2 GND
3
m1 2 3
4
5
.coSOT-25A
u(TOP VIEW)
www.datasheet4 *The component MM161
Cont
Noise
VO
N is MM157
MM161 N
1 Cont
2 GND
3 Noise
4 VOUT
5 VIN
N with changed pin configuration.
1 page MITSUMI
Measuring Circuit Typical model: MM157 N
150mA Regulator MM157 N, 161 N
*Ceramic
1µF
A
V
5
VO
Ceramic
0.01µF
4
Noise
VIN GND Cont
123
AA
1µF
*Ceramic
Application Circuit Typical model: MM157 N
*Ceramic
1µF
Ceramic
0.01µF
54
VO Noise
VIN GND Cont
123
1µF
*Ceramic
*Temperature Characteristics: B Type
Note
1. The output capacitor is required between output and GND to prevent oscillation.
2. Use a capacitance that is within the ESR characteristics stable range for output capacity.
It is possible to use a ceramic capacitor without ESR resistance for output.
The ceramic capacitor must be used more than 1µF and B type temperature characteristics.
3. The wire of Vcc and GND is required to print full ground plane for noise and stability.
4. The input capacitor must be connected a distance of less than 1cm from input pin.
5 Page |
Páginas | Total 10 Páginas | |
PDF Descargar | [ Datasheet MM1573x.PDF ] |
Número de pieza | Descripción | Fabricantes |
MM1573x | (MM157xx) 150mA Regulator | Mitsumishi |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |