Datenblatt-pdf.com


FID-550 Schematic ( PDF Datasheet ) - Fujitsu Media Devices

Teilenummer FID-550
Beschreibung Resistive Touch Panel Specification
Hersteller Fujitsu Media Devices
Logo Fujitsu Media Devices Logo 




Gesamt 7 Seiten
FID-550 Datasheet, Funktion
STANDARD
Resistive Touch Panel Specification
FID-550 7-Wire Series
Input Panel
Panel Drive
change over
switch
Noise Filter
MCU
Control
Section
A/D
converter
Interface
s FEATURES
Superior long life, using a unique construction method offering improved life over typical
technologies; by sensing data input only on the glass layer, typically a 10x improvement in
product life is achived.
Excellent specification and high quality
- Anti-Newton ring technology
- High reliability materials
Pen/Finger, Pen Only, Finger Only,
Light Touch types available
Transparency 80% - typical
s PART NUMBERS
Touch Panels:
s PART NUMBERS
Controller Boards:
Part Number Size
Type
Part Number
Type
N010-0510-T302 17"
Pen/Finger
N16B-0558-B240 7-Wire, RS232
N010-0510-T211 15"
Pen/Finger
N16B-0558-B720 7-Wire, USB
N010-0550-T913 13.3"
Pen/Finger
N010-0550-T711 12.1"
Pen/Finger
N010-0551-T242 12.1" Pen/Finger (light touch type)
N010-0550-T811 11.3
Pen/Finger
N010-0550-T601 10.4"
Pen only
N010-0550-T611 10.4"
Pen/Finger
s PART NUMBERS
Interface Controller Chips:
Part Number
Type
N010-0559-V022 7-Wire, RS232
NC41120-0015
7-Wire, USB
N010-0550-T621 10.4" Pen/Finger (light touch type)
N010-0550-T511 9.5"
Pen/Finger
N010-0550-T341 8.4"
Pen/Finger






FID-550 Datasheet, Funktion
FID-550 SERIES
s 9.0 CONNECTION AND MOUNTING
The details below indicate the recommended mounting structure for panel and enclosure. The enclosure
support to fix the touch panel must be over 1.0mm I width and must be outside the view (Transparent area).
Also ensure that the enclosure does not cause miss input by touching the view area.
The following diagram shows that the enclosure edge must be between the View area and the guaranteed
active area. Ensure space is allocated for the diodes, and we recommend that the material to fix the panel
and enclosure is elastic. Special design would be required to stop water ingress. The corners of the touch
panel are conductive so do not touch any metal parts after mounting.
Location
Detect
Top View (Picture, with conductive
side down)
1. Right/ Upper Glass
2. Right/ Upper Glass
3. Each side Glass
4. Left/ Lower Glass
5. Each side Glass
6. Left/ Lower Glass
7. All Film
0.7 3.35
Stiffener Board
Conductive Face
FPC-type cable
Laminate Film
Contact Section View
Bottom View (Drawing, with conductive side up)
(Mating connector type FCI or equivalent SFW15R-1ST: for FPC)
Transparent Area
Anit-input Area
Input Area
Shock absorber to protect
the panel (eg rubber)
0.8 mm min.
Upper Case
Cut-out / avoidance of
550 surface mount diodes
0.3 to 0.1 mm
Input Panel
Wiring Area
View Area
LCD
Circuit Board
Shock absorber
for protection
Connector
6

6 Page







SeitenGesamt 7 Seiten
PDF Download[ FID-550 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
FID-550Resistive Touch Panel SpecificationFujitsu Media Devices
Fujitsu Media Devices

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche