DataSheet.es    


PDF 5962-87679 Data sheet ( Hoja de datos )

Número de pieza 5962-87679
Descripción NPN-OUTPUT DC-INPUT OPTOCOUPLER
Fabricantes Micropac Industries 
Logotipo Micropac Industries Logotipo



Hay una vista previa y un enlace de descarga de 5962-87679 (archivo pdf) en la parte inferior de esta página.


Total 17 Páginas

No Preview Available ! 5962-87679 Hoja de datos, Descripción, Manual

REVISIONS
LTR
DESCRIPTION
DATE (YR-MO-DA)
APPROVED
A Added device types 02 and 03. Made changes to 1.3 and 1.4. Made
technical changes to table I. Made changes to figures 1 and 2.
Updated drawing to reflect MIL-H-38534 processing.
B Added vendor CAGE 31757. Editorial changes throughout.
C Added vendor to 5962-87679032X and added footnote 2 to the 5962-
87679012X vendor specified to incorrect military part number.
Editorial changes throughout.
D Changes in accordance with NOR 5962-R264-92.
E Add case outlines T, U, X, and Y. Rewrite entire document.
F Added device type 04 with cage 50434. Added case outline F to
paragraph 1.2.3. Redrew entire document.
G Changes in accordance with NOR 5962-R162-96.
H Added class K devices. Redrew entire document. -sld
J Paragraph 1.2.2, correct generic numbers for device types 01 and 05.
Table I, Input to output insulation leakage current test (II/O), conditions
column, change; relative humidity = 45 percent to relative humidity
65 percent. Editorial changes throughout.
90-11-19
91-09-17
92-05-14
92-07-27
93-08-02
96-02-29
96-06-24
98-04-09
04-10-21
Monica Poelking
Monica Poelking
Gregory Lude
Alan Barone
K. A. Cottongim
K. A. Cottongim
Kendall A. Cottongim
K. A. Cottnogim
Raymond Monnin
THE ORIGINAL FIRST PAGE OF THIS DRAWING HAS BEEN REPLACED.
REV
SHEET
REV
J
SHEET
15
REV STATUS
OF SHEETS
PMIC N/A
STANDARD
MICROCIRCUIT
DRAWING
REV
JJJJJJJJJJJJJ J
SHEET
1 2 3 4 5 6 7 8 9 10 11 12 13 14
PREPARED BY
Donald Osborne
CHECKED BY
Steve L. Duncan
DEFENSE SUPPLY CENTER COLUMBUS
POST OFFICE BOX 3990
COLUMBUS, OHIO 43218-3990
http://www.dscc.dla.mil
APPROVED BY
THIS DRAWING IS
AVAILABLE
mFOR USE BY ALL
oDEPARTMENTS
.cAND AGENCIES OF THE
uDEPARTMENT OF DEFENSE
eet4AMSC N/A
Monica Poelking
DRAWING APPROVAL DATE
88-06-03
REVISION LEVEL
J
tashDSCC FORM 2233
www.daAPR 97
MICROCIRCUIT, HYBRID, LINEAR, DUAL
AND QUAD CHANNEL, OPTICALLY
COUPLED ISOLATOR
SIZE
A
SHEET
CAGE CODE
67268
5962-87679
1 OF 15
5962-E016-05

1 page




5962-87679 pdf
3.3 Electrical performance characteristics. Unless otherwise specified herein, the electrical performance characteristics are
as specified in table I and shall apply over the full specified operating temperature range.
3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical
tests for each subgroup are defined in table I.
3.5 Marking of device(s). Marking of device(s) shall be in accordance with MIL-PRF-38534. The device shall be marked with
the PIN listed in 1.2 herein. In addition, the manufacturer's vendor similar PIN may also be marked.
3.6 Data. In addition to the general performance requirements of MIL-PRF-38534, the manufacturer of the device described
herein shall maintain the electrical test data (variables format) from the initial quality conformance inspection group A lot sample,
for each device type listed herein. Also, the data should include a summary of all parameters manually tested, and for those
which, if any, are guaranteed. This data shall be maintained under document revision level control by the manufacturer and be
made available to the preparing activity (DSCC-VA) upon request.
3.7 Certificate of compliance. A certificate of compliance shall be required from a manufacturer in order to supply to this
drawing. The certificate of compliance (original copy) submitted to DSCC-VA shall affirm that the manufacturer's product meets
the performance requirements of MIL-PRF-38534 and herein.
3.8 Certificate of conformance. A certificate of conformance as required in MIL-PRF-38534 shall be provided with each lot of
microcircuits delivered to this drawing.
4. VERIFICATION
4.1 Sampling and inspection. Sampling and inspection procedures shall be in accordance with MIL-PRF-38534 or as
modified in the device manufacturer's Quality Management (QM) plan. The modification in the QM plan shall not affect the form,
fit, or function as described herein.
4.2 Screening. Screening shall be in accordance with MIL-PRF-38534. The following additional criteria shall apply:
a. Burn-in test, method 1015 of MIL-STD-883.
(1) Test condition A, B, C, or D. The test circuit shall be maintained by the manufacturer under document revision level
control and shall be made available to either DSCC-VA or the acquiring activity upon request. Also, the test circuit
shall specify the inputs, outputs, biases, and power dissipation, as applicable, in accordance with the intent specified
in method 1015 of MIL-STD-883.
(2) TA as specified in accordance with table I of method 1015 of MIL-STD-883.
b. Interim and final electrical test parameters shall be as specified in table II herein, except interim electrical parameter
tests prior to burn-in are optional at the discretion of the manufacturer.
STANDARD
MICROCIRCUIT DRAWING
DEFENSE SUPPLY CENTER COLUMBUS
COLUMBUS, OHIO 43218-3990
DSCC FORM 2234
APR 97
SIZE
A
REVISION LEVEL
J
5962-87679
SHEET
5

5 Page





5962-87679 arduino
Device types 01 and 05.
(Each channel)
NOTE: All input pulses are supplied by generators having the following characteristics: ZO = 50; tr = 5 ns.
FIGURE 3. Switching test circuit and waveforms.
STANDARD
MICROCIRCUIT DRAWING
DEFENSE SUPPLY CENTER COLUMBUS
COLUMBUS, OHIO 43218-3990
DSCC FORM 2234
APR 97
SIZE
A
REVISION LEVEL
J
5962-87679
SHEET
11

11 Page







PáginasTotal 17 Páginas
PDF Descargar[ Datasheet 5962-87679.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
5962-87679Hermetically Sealed / Transistor Output Optocouplers for Analog and Digital ApplicationsHewlett-Packard
Hewlett-Packard
5962-87679NPN-OUTPUT DC-INPUT OPTOCOUPLERMicropac Industries
Micropac Industries

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar