Datenblatt-pdf.com


HIF3BA-xxx Schematic ( PDF Datasheet ) - Hirose Electric

Teilenummer HIF3BA-xxx
Beschreibung (HIF3B Series) Ribbon Cable Connectot Compliant
Hersteller Hirose Electric
Logo Hirose Electric Logo 




Gesamt 15 Seiten
HIF3BA-xxx Datasheet, Funktion
Ribbon Cable connector Compliant with MIL Standard
HIF3B Series
sFeatures
1. Product Compliant with MIL Standard
HIF3B series has been developed as a product compliant with MIL
standard, and used for wide applications.
2. UL Approval Product
HIF3B series connectors are UL approved.
3. Mechanism to Prevent Mis-insertion
This connector is equipped with the mechanism to prevent Mis-
insertion as follows.
1 The system provides the convex area to insert the guide-key on the
pin header side, and to guide it in combination with the socket
convex area (MIL standard).
2 The system embeds and guides the polarizing key in the socket holes.
4. Applicable Cable AWG#28
The applicable cable is UL2651 AWG#28 flat cable (7 cores./
0.127mm, jacket dia. 0.9±0.1mm).
sProduct Specifications
Rating
Rated Current : 1A
Operating Temperature Range : 55~+85ç (Note 1) Storage Temperature Range : 10~+60ç (Note 2)
Rated Voltage : 200V AC Operating Moisture Range : 40~80%
Storage Humidity Range : 40~70% (Note 2)
Item Specification
Condition
1. Insulation Resistance 1000Mø min.
Measured at 500V DC
2. Withstand voltage
Neither short or breakdown
650V AC rms for 1 minute
3. Contact Resistance 15mø max.
Measured at 0.1A
4. Vibration
Electrical discontinuity, 1µS max.
10~55Hz and single amplitude 0.75mm in 3 directions for 2 hours
5. Moisture Resistance Insulation resistance: 1000Mø min.
6. Temperature Cycle No defect such as crack or split occurs
Exposed to temperature 40±2ç and humidity 90~95% for 96 hours
(-65ç: 30 minutes 15~35ç: 5 minutes max.
125ç: 30 minutes 15~35ç: 5 minutes max.) 5 cycles
7. Operating Life
Contact resistance: 15mø max.
500 cycles
8. Resistance to Soldering heat No resin area fusion to degrade performance
Automatic soldering: 260ç for 10 seconds
Manual soldering: Soldering iron temperature: 300ç for 3 seconds
Note 1: Temperature rise is included when energized.
Note 2: This storage indicates a long-term storage state for the unused product before the board mounted.
The operating temperature and moisture ranges are applied to the non-energized state after the connector has been installed
to the board.
mNote 3: The above standards represent this series. Individual formal agreement should be based on the "Delivery Specification".
.cosMaterial
uPart
t4Insulator
sheeSocket Contact
www.dataPin header contact
D
DA
Material
PBT
Beryllium copper
Copper alloy
Brass
Finish
Black
Connection area
Gold plating
Connection area
Gold plating
Connection area
Gold plating
Connection area
Solder plating
Selective gold plating
Remarks
UL94V-0
–––––––
–––––––
B15






HIF3BA-xxx Datasheet, Funktion
sFour Wall Angle Dip
BPCB Footprints
sn=number of contacts
Note 1, Note 2: The number of polarizing slot and key installed positions
changes according to products. Refer to the list as shown below.
Note 3: The spacer moves to the right according to the number of
contacts.
Note 4: The 10, 50, 60 and 64 contact connectors contain two types of
polarizing slots.
Use products, referring to (Note 1) (Note 2).
Unit:mm
Product No.
HRS No. Number of Contacts A B C D E F
Polarizing Slot Polarizing Key Install
(Note 1)
(Note 2)
5 HIF3BA-10PA-2.54DS CL610-0091-2
10
32.0
17.5
10.16
28.14
MAX51.1
21.8
27.9
None
One on right side
HIF3BD-10PA-2.54DS CL610-0171-0
10
32.0
17.5
10.16
28.14
MAX51.1
21.8
27.9
None
5 HIF3BA-14PA-2.54DS CL610-0092-5
14
37.1
22.6
15.24
33.24
MAX56.2
26.9
33.0
One on right side
5 HIF3BA-16PA-2.54DS CL610-0093-8
16
39.6
25.1
17.78
35.74
MAX58.7
29.5
35.5
5 HIF3BA-20PA-2.54DS CL610-0094-0
5 HIF3BA-26PA-2.54DS CL610-0095-3
20
26
44.7
30.2
22.86
40.84
MAX63.8
34.5
40.6
52.3
37.8
30.48
48.44
MAX71.4
42.2
48.3
One at center
5 HIF3BA-30PA-2.54DS CL610-0096-6
30
57.4
42.9
35.56
53.54
MAX76.5
47.2
53.3
5 HIF3BA-34PA-2.54DS CL610-0097-9
34
62.5
48.0
40.64
58.64
MAX81.6
52.3
58.4
5 HIF3BA-40PA-2.54DS CL610-0098-1
5 HIF3BA-50PA-2.54DS CL610-0099-4
40
50
70.1
55.6
48.26
66.24
MAX89.2
59.9
66.0
82.8
68.3
60.96
78.94
MAX101.9
72.6
78.7
One on right and left sides, resp.
One on right and
left sides, resp.
5 HIF3BB-50PA-2.54DS CL610-0131-5
50
82.8
68.3
60.96
78.94
MAX101.9
72.6
78.7
One at center
5 HIF3BA-60PA-2.54DS CL610-0100-1
60
95.5
81.0
73.66
91.64
MAX114.6
85.3
91.4
One on right and left sides, resp.
5 HIF3BB-60PA-2.54DS CL610-0132-8
60
95.5
81.0
73.66
91.64
MAX114.6
85.3
91.4
One at center
5 HIF3BA-64PA-2.54DS CL610-0101-4
64
100.6
86.1
78.74
96.74
MAX119.7
90.4
96.5
One on right and left sides, resp.
5 HIF3BB-64PA-2.54DS CL610-0133-0
64
100.6
86.1
78.74
96.74
MAX119.7
90.4
96.5
One at center
The products marked with 5 comply with MIL standard.
B20

6 Page









HIF3BA-xxx pdf, datenblatt
sTwo Stage Staking Right Angle Dip
Note 1, Note 2: The number of polarizing slot and key installed positions changes according to products. Refer
to the list as shown below.
Note 3: The spacer moves to the right according to the number of contacts.
Note 4: The 10, 50, 60 and 64 contact connectors consists of two types.
Use products, confirming (Note 1) (Note 2).
Note 5: The mark * ndicates the number of contacts.
Note 6: The locator is located optionally.
Unit:mm
Product No.
HRS No. Number of Contacts A B C D E F
Polarizing Slot Polarizing Key Install
(Note 1)
(Note 2)
5 HIF3BA-10PA-2.54WB CL610-1502-0
10
32.0
17.5
10.16
28.14
MAX51.1
21.8
27.9
None
One on right side
HIF3BD-10PA-2.54WB CL610-1503-3
10
32.0
17.5
10.16
28.14
MAX51.1
21.8
27.9
None
5 HIF3BA-16PA-2.54WB CL610-1505-9
16
39.6
25.1
17.78
35.74
MAX58.7
29.5
35.5
5 HIF3BA-20PA-2.54WB CL610-1506-1
20
44.7
30.2
22.86
40.84
MAX63.8
34.5
40.6
5 HIF3BA-26PA-2.54WB CL610-1507-4
26
52.3
37.8
30.48
48.44
MAX71.4
42.2
48.3
One at center
5 HIF3BA-30PA-2.54WB CL610-1508-7
30
57.4
42.9
35.56
53.54
MAX76.5
47.2
53.3
5 HIF3BA-34PA-2.54WB CL610-1509-0
34
62.5
48.0
40.64
58.64
MAX81.6
52.3
58.4
5 HIF3BA-40PA-2.54WB CL610-1510-9
5 HIF3BA-50PA-2.54WB CL610-1511-1
40
50
70.1
55.6
48.26
66.24
MAX89.2
59.9
66.0
82.8
68.3
60.96
78.94
MAX101.9
72.6
78.7
One on right and left sides, resp.
One on right and
left sides, resp.
5 HIF3BB-50PA-2.54WB CL610-1512-4
50
82.8
68.3
60.96
78.94
MAX101.9
72.6
78.7
One at center
5 HIF3BA-60PA-2.54WB CL610-1513-7
60
95.5
81.0
73.66
91.64
MAX114.6
85.3
91.4
One on right and left sides, resp.
5 HIF3BB-60PA-2.54WB CL610-1514-0
60
95.5
81.0
73.66
91.64
MAX114.6
85.3
91.4
One at center
5 HIF3BA-64PA-2.54WB CL610-1515-2
64
100.6
86.1
78.74
96.74
MAX119.7
90.4
96.5
One on right and left sides, resp.
5 HIF3BB-64PA-2.54WB CL610-1516-5
64
100.6
86.1
78.74
96.74
MAX119.7
90.4
96.5
One at center
The products marked with 5 comply with MIL standard.
B26

12 Page





SeitenGesamt 15 Seiten
PDF Download[ HIF3BA-xxx Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
HIF3BA-xxx(HIF3B Series) Ribbon Cable Connectot CompliantHirose Electric
Hirose Electric

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche