Datenblatt-pdf.com


MOC3010 Schematic ( PDF Datasheet ) - Motorola Semiconductors

Teilenummer MOC3010
Beschreibung (MOC3010 - MOC3012) 6-Pin DIP Random-Phase Optoisolators Triac Driver Output
Hersteller Motorola Semiconductors
Logo Motorola Semiconductors Logo 




Gesamt 6 Seiten
MOC3010 Datasheet, Funktion
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
GlobalOptoisolator
6-Pin DIP Random-Phase
Optoisolators Triac Driver Output
(250 Volts Peak)
The MOC3010 Series consists of gallium arsenide infrared emitting diodes,
optically coupled to silicon bilateral switch and are designed for applications
requiring isolated triac triggering, low–current isolated ac switching, high
electrical isolation (to 7500 Vac peak), high detector standoff voltage, small
size, and low cost.
To order devices that are tested and marked per VDE 0884 requirements, the
suffix ”V” must be included at end of part number. VDE 0884 is a test option.
Recommended for 115 Vac(rms) Applications:
Solenoid/Valve Controls
Lamp Ballasts
Interfacing Microprocessors to 115 Vac Peripherals
Motor Controls
Static ac Power Switch
Solid State Relays
Incandescent Lamp Dimmers
MAXIMUM RATINGS (TA = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
INFRARED EMITTING DIODE
Reverse Voltage
Forward Current — Continuous
Total Power Dissipation @ TA = 25°C
Negligible Power in Transistor
Derate above 25°C
VR 3 Volts
IF 60 mA
PD 100 mW
1.33 mW/°C
OUTPUT DRIVER
Off–State Output Terminal Voltage
Peak Repetitive Surge Current
(PW = 1 ms, 120 pps)
VDRM
ITSM
250
1
Volts
A
Total Power Dissipation @ TA = 25°C
Derate above 25°C
PD 300 mW
4 mW/°C
TOTAL DEVICE
Isolation Surge Voltage(1)
(Peak ac Voltage, 60 Hz, 1 Second Duration)
VISO
7500
Vac(pk)
Total Power Dissipation @ TA = 25°C
Derate above 25°C
PD 330 mW
4.4 mW/°C
Junction Temperature Range
TJ – 40 to +100 °C
Ambient Operating Temperature Range(2)
TA – 40 to +85 °C
Storage Temperature Range(2)
Tstg – 40 to +150
°C
Soldering Temperature (10 s)
TL 260 °C
1. Isolation surge voltage, VISO, is an internal device dielectric breakdown rating.
1. For this test, Pins 1 and 2 are common, and Pins 4, 5 and 6 are common.
2. Refer to Quality and Reliability Section in Opto Data Book for information on test conditions.
Preferred devices are Motorola recommended choices for future use and best overall value.
GlobalOptoisolator is a trademark of Motorola, Inc.
(Replaces MOC3009/D)
©MMoottoorroolal,aInOc.p1t9o9e5lectronics Device Data
Order this document
by MOC3010/D
MOC3010
[IFT = 15 mA Max]
MOC3011
[IFT = 10 mA Max]
MOC3012*
[IFT = 5 mA Max]
*Motorola Preferred Device
STYLE 6 PLASTIC
61
STANDARD THRU HOLE
CASE 730A–04
COUPLER SCHEMATIC
16
25
34
1. ANODE
2. CATHODE
3. NC
4. MAIN TERMINAL
5. SUBSTRATE
DO NOT CONNECT
6. MAIN TERMINAL
1






MOC3010 Datasheet, Funktion
MOC3010 MOC3011 MOC3012
–A–
64
–B–
13
F 4 PL
–T–
SEATING
PLANE
E 6 PL
N
C
L
GK
D 6 PL
0.13 (0.005) M T A M
BM
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION L TO CENTER OF LEAD WHEN
FORMED PARALLEL.
INCHES
MILLIMETERS
DIM MIN MAX MIN MAX
A 0.320 0.350 8.13 8.89
B 0.240 0.260 6.10 6.60
C 0.115 0.200 2.93 5.08
D 0.016 0.020 0.41 0.50
E 0.040 0.070 1.02 1.77
F 0.010 0.014 0.25 0.36
G 0.100 BSC
2.54 BSC
J 0.008 0.012 0.21 0.30
K 0.100 0.150 2.54 3.81
L 0.400 0.425 10.16 10.80
J N 0.015 0.040 0.38 1.02
*Consult factory for leadform
option availability
CASE 730D–05
ISSUE D
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit,
and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different
applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does
not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in
systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of
the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such
unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless
against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part.
Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.
How to reach us:
USA / EUROPE: Motorola Literature Distribution;
P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447
JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, Toshikatsu Otsuki,
6F Seibu–Butsuryu–Center, 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–3521–8315
MFAX: [email protected] – TOUCHTONE (602) 244–6609 HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
INTERNET: http://Design–NET.com
51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298
6
*MOC3010/D*Motorola OptoelectronicsMDOeCvi3c0e10D/Data

6 Page







SeitenGesamt 6 Seiten
PDF Download[ MOC3010 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
MOC3010Optocouplers/Optoisolators (Rev. A)Texas Instruments
Texas Instruments
MOC3010(MOC3009 - MOC3012) NON-ZERO-CROSSING TRIACSQT Optoelectronics
QT Optoelectronics
MOC3010(MOC3010 - MOC3012) 6-Pin DIP Random-Phase Optoisolators Triac Driver OutputMotorola Semiconductors
Motorola Semiconductors
MOC3010(MOC3009X - MOC3012X) OPTICALLY COUPLED BILATERAL SWITCH NON-ZERO CROSSING TRIACISOCOM COMPONENTS
ISOCOM COMPONENTS
MOC3010M(MOC3010M - MOC3023M) 6-PIN DIP RANDOM-PHASE OPTOISOLATORS TRIAC DRIVER OUTPUT (250/400 VOLT PEAK)Fairchild Semiconductor
Fairchild Semiconductor

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche