ST6210L Schematic ( PDF Datasheet ) - ST Microelectronics

Teilenummer	ST6210L
Beschreibung	(ST6208L - ST6220L) LOW VOLTAGE 8-BIT ROM MCUs WITH A/D CONVERTER AND 20 PINS
Hersteller	ST Microelectronics
Logo
Gesamt 10 Seiten ST6208L/09L R ST6210L/20L LOW VOLTAGE 8-BIT ROM MCUs WITH A/D CONVERTER AND 20 PINS s 2.4 to 3.9V Supply Operating Range s 4 MHz Maximum Clock Frequency s 0 to +70°C Operating Temperature Range s Run, Wait and Stop Modes s 5 Interrupt Vectors s Look-up Table capability in Program Memory s Data Storage in Program Memory: User selectable size s Data RAM: 64bytes s 12 I/O pins, fully programmable as: – Input with pull-up resistor – Input without pull-up resistor – Input with interrupt generation – Open-drain or push-pull output – Analog Input (except ST6208L) s 4 I/O lines can sink up to 12mA to drive LEDs s 8-bit Timer/ Counter with 7-bit programmable prescaler s Digital Watchdog s 8-bit A/D Converter with 8 analog inputs s On-chip Clock oscillator can be driven by Quartz Crystal Ceramic resonator or RC network s Power-on Reset s One external Non-Maskable Interrupt s ST626x-EMU2 Emulation and Development System (connects to an MS-DOS PC via an RS232 serial line) PDIP20 PSO20 (See end of Datasheet for Ordering Information) DEVICE SUMMARY DEVICE ST62T08L ST62T09L ST62T10L ST62T20L ROM (Bytes) 1036 1036 1836 3884 I/O Pins 12 12 12 12 Analog inp uts - 4 8 8 November 1997 Rev. 1.0 1/10 1 ST6208L/09L ST6210L/20L 2.2 RECOMMENDED OPERATING CONDITIONS Symbol Parameter Test Conditions Min. Value Typ. Max. Unit TA Operating Temperature 1 Suffix Version 0 70 °C VDD fOSC IINJ+ IINJ- Operating Supply Voltage Oscillator Frequency2) Pin Injection Current (positive) Pin Injection Current (negative) fOSC = 2MHz fOSC = 4MHz VDD = 2.4V VDD = 3.0V VDD = 2.4 to 3.9V VDD = 2.4 to 3.9V 2.4 3 0 0 3.9 3.9 V 2.0 4.0 MHz +5 mA -5 mA Notes: 1. Care must be taken in case of negative current injection, where adapted impedance must be respected on analog sources to not affect the A/D conversion. For a -1mA injection, a maximum 10 KΩ is recommended. 2.An oscillator frequency above 1MHz is recommended for reliable A/D results Figure 3. Maximum Operating FREQUENCY (Fmax) Versus SUPPLY VOLTAGE (VDD) Maximum FREQU ENCY (MHz) 4.0 FUNCTION ALITY IS NOT 3.5 GUARANTEED IN THIS AREA 3.0 2.5 2.0 1.5 1 0.5 2.1 2.4 2.7 3.0 3.3 3.6 3.9 SUPPLY VOLTAGE (VDD) The shaded area is outside the recommended operating range; device functionality is not guaranteed under these conditions. 6/10 1 6 Page
Seiten	Gesamt 10 Seiten
PDF Download	[ ST6210L Schematic.PDF ]

Link teilen

Besondere Datenblatt

Teilenummer	Beschreibung	Hersteller
ST6210C	(ST6208C - ST6220C) 8-BIT MCUs WITH A/D CONVERTER	ST Microelectronics
ST6210C	(ST62P08C - ST62P20C) 8-BIT MCU	ST Microelectronics
ST6210L	(ST6208L - ST6220L) LOW VOLTAGE 8-BIT ROM MCUs WITH A/D CONVERTER AND 20 PINS	ST Microelectronics

Teilenummer	Beschreibung	Hersteller
CD40175BC	Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.	Fairchild Semiconductor
KTD1146	EPITAXIAL PLANAR NPN TRANSISTOR.	KEC