UGN3133 Schematic ( PDF Datasheet ) - Allegro MicroSystems

Teilenummer	UGN3133
Beschreibung	(UGN3132 / UGN3133) ULTRA-SENSITIVE BIPOLAR HALL-EFFECT SWITCHES
Hersteller	Allegro MicroSystems
Logo
Gesamt 8 Seiten V CC 12 3 3132 AND 3133 ULTRA-SENSITIVE BIPOLAR HALL-EFFECT SWITCHES These Hall-effect switches are designed for magnetic actuation using a bipolar magnetic field, i.e., a north-south alternating field. They combine extreme magnetic sensitivity with excellent stability over varying temperature and supply voltage. The high sensitivity permits their use with multi-pole ring magnets over relatively large distances. Each device includes a voltage regulator, quadratic Hall voltage generator, temperature stability circuit, signal amplifier, Schmitt trigger, and open-collector output on a single silicon chip. The on-board regula- tor permits operation with supply voltages of 4.5 to 24 V. The switch output can sink up to 25 mA. With suitable output pull up, they can be used directly with bipolar or MOS logic circuits. The three package styles available provide a magnetically optimized package for most applications. Suffix ‘LT’ is a miniature SOT-89/TO- 243AA transistor package for surface-mount applications; suffixes ‘U’, and ‘UA’ feature wire leads for through-hole mounting. Prefix ‘UGN’ devices are rated for continuous operation over the temperature range of -20°C to +85°C, prefix ‘UGS’ devices over an extended range of -40°C to +125°C, and prefix ‘UGL’ devices over the range of -40°C to +150°C. Dwg. PH-003A Pinning is shown viewed from branded side. ABSOLUTE MAXIMUM RATINGS Supply Voltage, VCC . . . . . . . . . . . . . 25 V Reverse Battery Voltage, VRCC . . . . -35 V Magnetic Flux Density, B . . . . Unlimited Output OFF Voltage, VOUT . . . . . . . . 25 V Continuous Output Current, IOUT . 25 mA Operating Temperature Range, TA Prefix UGL . . . . . . . -40°C to +150°C Prefix UGN . . . . . . . . -20°C to +85°C Prefix UGS . . . . . . . -40°C to +125°C Storage Temperature Range, TS . . . . . . . . . . . . . . . -65°C to +150°C FEATURES I 4.5 V to 24 V Operation I Reverse Battery Protection I Superior Temperature Stability I Superior Supply Voltage Stability I Activate with Multi-Pole Ring Magnets I Solid-State Reliability I Small Size I Constant Output Amplitude I Resistant to Physical Stress Always order by complete part number including prefix and suffix, e.g., UGN3132LT . 3132 AND 3133 BIPOLAR HALL-EFFECT SWITCHES PACKAGE DESIGNATOR ‘U’ Dimensions in Inches (controlling dimensions) Dimensions in Millimeters (for reference only) 0.183 0.178 0.063 0.059 4.65 4.52 1.60 1.50 0.181 0.176 0.086 1 2 3 MAX 0.600 0.560 SEE NOTE 0.0189 0.0142 45° 0.018 0.0173 0.0138 4.60 4.47 2.18 1 2 3 MAX 15.24 14.23 SEE NOTE 0.48 0.36 45° 0.46 0.44 0.35 0.050 0.100 Dwg. MH-003E in 1.27 2.54 Devices in the ‘U’ package are NOT RECOMMENDED FOR NEW DESIGN Dwg. MH-003E mm NOTES: 1. Tolerances on package height and width represent allowable mold offsets. Dimensions given are measured at the widest point (parting line). 2. Exact body and lead configuration at vendor’s option within limits shown. 3. Height does not include mold gate flash. 4. Recommended minimum PWB hole diameter to clear transition area is 0.035" (0.89 mm). 5. Where no tolerance is specified, dimension is nominal. 115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000 6 Page
Seiten	Gesamt 8 Seiten
PDF Download	[ UGN3133 Schematic.PDF ]

Link teilen

Besondere Datenblatt

Teilenummer	Beschreibung	Hersteller
UGN3130	(UGN3113/3120/3130/3140) Analog & Mixed-Signal Processing / Hall-Effect Switches	Allegro Micro Systems
UGN3130	(UGN3113 - UGN3130) Hall-Effect Switch	Allegro Microsystems
UGN3132	(UGN3132 / UGN3133) ULTRA-SENSITIVE BIPOLAR HALL-EFFECT SWITCHES	Allegro MicroSystems
UGN3133	(UGN3132 / UGN3133) ULTRA-SENSITIVE BIPOLAR HALL-EFFECT SWITCHES	Allegro MicroSystems

Teilenummer	Beschreibung	Hersteller
CD40175BC	Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.	Fairchild Semiconductor
KTD1146	EPITAXIAL PLANAR NPN TRANSISTOR.	KEC