|
|
PDF SS-779E-1 Data sheet ( Hoja de datos )
| Número de pieza | SS-779E-1 | |
| Descripción | DC Tachometer Generators | |
| Fabricantes | Servo-TEK | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SS-779E-1 (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
|
No Preview Available !
SERVO-TEK ®
SERVO-TEK PRODUCTS COMPANY, INC.
DC Tachometer Generators
www.servotek.com
RC-700 rev. 2
1 page  
SERVO-TEK ®
1086 Goffle Road • Hawthorne, NJ 07506 • [email protected]
Phone (973) 427-3100 • Fax (973) 427-4249 • www.servotek.com
Low Ripple Units (F-Series, H-Series and J-Series)
1 to 30 volts/1000 RPM
CS-7514F-51C and SA-7356F-1
F-Series (1-8 volts/1000 RPM)
Servo-Tek low ripple DC tachometer generators
satisfy the need for a cost effective, very
low ripple tachometer. In addition to being the
first economical low ripple units of their type, the
F-Series tachometers incorporate all the desirable
features of the standard units such as temperature
compensation, long brush life, excellent linearity,
and small dimensions.
The ripple voltage does not exceed 1.5% RMS
and 3.5% peak to peak at any speed in excess of
40 RPM on any F-Series, H-Series or J-Series DC
tachometer generator.
SB-7483H-1
H-Series (5-16 volts/1000 RPM)
The H-Series DC tachometer generators are low
ripple units possessing all the same traits as the
F-Series, but with the B-length armature. This
means a slightly higher output voltage.
J-Series (16-30 volts/1000 RPM)
The J-Series DC tachometer generators are low
ripple units possessing all the same traits as the
F-Series, but with the D-length armature. These
generators are ideal for applications where high
output voltages with low ripple signals are required.
Other shaft sizes and mounting configurations are
available.
F-Series, H-Series and J-Series Specifications
Model Number
Weight
Mounting (Approx.)
Inertia
(Approx.)
oz-in-sec2
V/1000 RPM
RPM
(max)
Armature Armature
Shaft
Resistance Inductance Outline Mounting Size
(dynamic) (henrys) Dimensions Dimensions (in.)
SA-7356F-1 Face 3.0 oz 1.14 x 10-4 7.0v ± 3% 12,000 500Ω 0.38h Fig. 10 Fig. 1 .120
SA-7388F-1 Face 3.0 oz 1.32 x 10-4 7.0v ± 3% 12,000 500Ω 0.38h Fig. 10 Fig. 1 .187
CS-7514F-51C Flange 3.0 oz 1.32 x 10-4 3.0v ± 3% 12,000 130Ω 0.061h Fig. 11 Fig. 3 .250
SB-7483H-1 Flange 4.0 oz 1.96 x 10-4 16.0v ± 3% 8,000 800Ω 0.72h Fig. 11 Fig. 2 .187
SU-780J-1 Flange 8.5 oz 4.54 x 10-4 30v ± 1% 5,000 1050Ω 1.00h Fig. 10 Fig. 5 .187
Maximum Driving Torque for F-Series, H-Series and J-Series is 0.25 oz-in at 25ºC
Most units listed above are normally in stock
5 Page | ||
| Páginas | Total 8 Páginas | |
| PDF Descargar | [ Datasheet SS-779E-1.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SS-779E-1 | DC Tachometer Generators | Servo-TEK |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |