|
|
Teilenummer | RI-60 |
|
Beschreibung | Ultra-miniature dry-reed switch germetically sealed in a gas-dilled glass envelope | |
Hersteller | ETC | |
Logo | ||
Gesamt 2 Seiten RI-60 Series
RI-60 SERIES
Ultra-miniature dry-reed switch hermetically sealed in a gas-filled
glass envelope. Single-pole, single-throw (SPST) type, having
normally open contacts, and containing two magnetically actuated
reeds.
The switch is of the double-ended type and may be actuated by an
electromagnet, a permanent magnet or a combination of both.
The device is intended for use in relays, sensors, pulse counters or
similar devices.
RI-60 SERIES FEATURES
u Ideal for ATE switching
u Contact layers: Gold, sputtered ruthenium
u Superior glass-to-metal seal and blade alignment
u Excellent life expectancy and reliability
Dimensions in inches (mm)
GENERAL DATA FOR ALL MODELS RI-60
No-load conditions (operating frequency: 100 Hz)
AT-Customization / Preformed Leads
Besides the standard models, customized products can
also be supplied offering the following options:
! Operate and release ranges to customer specification
! Cropped and/or preformed leads
COILS
All characteristics are measured using the Philips stan-
dard coil. For definitions of the Philips Standard Coil and
the standard MIL Coil, refer to “Application Notes” in
the Reed Switch Technical & Application Information
Section of this catalog.
Life expectancy: min.109 operations with a failure rate of
less than 2 x10-10 with a confidence level of 90%.
End of life criteria:
Contact resistance > 1Ω after 2 ms
Release time > 2ms (latching or contact sticking).
Loaded conditions (resistive load: 5 V; 100 mA;
operating frequency: 125 Hz)
Life expectancy: min. 2 x 107operations with a failure
rate of less than 10-8 with a confidence level of 90%.
Relationship between Philips Standard Coil and the
Standard MIL Coil
Operate value of standard MIL Coil = 0.83 x operate
value of Philips Sandard Coil + 0.30 AT.
Release value of standard MIL Coil = 0.83 x release
value of Philips Standard Coil + 0.18 AT.
End of life criteria:
Contact resistance > 1Ω after 2.5 ms
Release time > 1 ms (latching or contact sticking).
Loaded conditions (resistive load: 20 V; 500 mA;
operating frequency: 125 Hz)
LIFE EXPECTANCY AND RELIABILITY
The life expectancy data given below are valid for a coil
energized at 1.25 times the published maximum operate
value for each type in the RI-60 series.
Life expectancy: min. 2 x 107 operations with a failure
rate of < 10-8 with a confidence level of 90%.
54 Catch Us on the Web! www.cotorelay.com E-Mail us: [email protected]
| ||
Seiten | Gesamt 2 Seiten | |
PDF Download | [ RI-60 Schematic.PDF ] |
Teilenummer | Beschreibung | Hersteller |
RI-60 | Ultra-miniature dry-reed switch germetically sealed in a gas-dilled glass envelope | ETC |
Teilenummer | Beschreibung | Hersteller |
CD40175BC | Hex D-Type Flip-Flop / Quad D-Type Flip-Flop. |
Fairchild Semiconductor |
KTD1146 | EPITAXIAL PLANAR NPN TRANSISTOR. |
KEC |
www.Datenblatt-PDF.com | 2020 | Kontakt | Suche |