|
|
PDF CN8223 Data sheet ( Hoja de datos )
| Número de pieza | CN8223 | |
| Descripción | ATM Transmitter/Receiver with UTOPIA Interface | |
| Fabricantes | Conexant Systems | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de CN8223 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
CN8223
ATM Transmitter/Receiver with UTOPIA Interface
The CN8223 ATM Transmitter/Receiver with UTOPIA Level 1 interface provides a
single-access ATM service termination for User-to-Network (UNI) and
Network-to-Network Interfacing (NNI) in conformance with ATM Forum UNI and NNI
Specification 94/0317; Bellcore Specifications TR-TSV-000772, TR-TSV-000773,
TR-NWT-000253, and T1S1/92-185; ITU Recommendations I.432, G.707, G.751,
G.832, and Q.921; and ETSI prETS 300 213 and 300 214. Both Customer Premise
Equipment (CPE) and switching system interface functions are provided. The CN8223
provides DS1, E1, DS3, E3, E4, STS-1, and STS-3c (and STM-1) ATM cell alignment
functions. The system interface is via a parallel FIFO port or UTOPIA interface. In
addition, the CN8223 terminates the operations and maintenance flows F1, F2, and F3.
The CN8223 provides four FIFO port interfaces and one UTOPIA interface. Each
receiver port can be programmed with a particular Virtual Channel Identifier/Virtual
Path Identifier (VCI/VPI) address for message routing. VCI/VPI pages can also be
selected via masking registers.
The microprocessor can set control registers for insertion of selected header fields
by the transmitter on an individual port basis. The microprocessor can also control
insertion of all overhead and can insert errors in selected fields for test equipment
applications.
Functional Block Diagram
8
Data
Bus 8
Port
Control
UTOPIA
or FIFO
Interface
Microprocessor Microprocessor
Address
Data
Line Overhead
Cell
FIFO
8
7 8 16
4-Port
FIFO
Interface
Microprocessor
Interface
52 Control Registers
28 Status Registors
HDLC
Data
Link
8
Cell
Generation
TX
Rate
Control
8
Cell
Alignment
Header
Filter
Cell
Validation
HEC or
8 PLCP
8
Framers 1
DS3
E3 (G.751)
E3 (G.832)
STS-1
E4 (G.832)
ATM
UNI
STS-3c 1
STM-1
TAXI
8
ATM Layer
Physical Framing
Distinguishing Features
• Integrates 7 line framers with ATM
layer processing according to ATM
Forum UNI and NNI Specifications
• UTOPIA Level 1 interface
• Internal framers for DS3, E3 (G.751,
G.832), E4 (G.832), STS-1, STS-3c,
STM-1
• PLCP and G.804 HEC cell alignment
for all data rates from 1.544 Mbps to
155 Mbps
• Direct interface to TAXITM or external
T1/E1 framers
• ATM and SMDS cell modes
• 4 FIFO ports with header screening,
formatting, and transmit priority
controls
• Idle cells generated and screened
• Statistics counts latched on
one-second intervals
• Error detection and insertion
• Option insertion or generation of all
line and cell overhead
• Serial or parallel line interface
• Available evaluation module
reference design and software
• Supports Automatic Protection
Switching (APS)
Applications
• WAN equipment
• ATM switches
• Test equipment
• ATM routers and hub
Data Sheet
100046C
March 8, 2000
1 page  
CN8223
ATM Transmitter/Receiver with UTOPIA Interface
Table of Contents
2.7 FIFO Port/UTOPIA Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-37
2.7.1 FIFO Interface Inputs and Outputs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-37
2.7.2 Transmit Port Priority Mechanism. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-40
2.7.3 Transmit Rate Shaping Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-41
2.7.4 Receive Port Addressing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-41
2.7.4.1 Header Screening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-42
2.7.4.2 Output Screening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-42
2.7.5 UTOPIA Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-43
2.8 FEAC Channel and HDLC Data Link Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-44
2.8.1 FEAC Channel Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-44
2.8.2 FEAC Channel Receiver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-45
2.8.3 HDLC Data Link Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-45
2.8.3.1 Sending a Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-46
2.8.3.2 Aborting a Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-47
2.8.3.3 Transmitter Interrupts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-47
2.8.3.4 Transmitter Control Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-48
2.8.4 HDLC Data Link Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-48
2.8.4.1 Receiver Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-49
2.8.4.2 Receiver Interrupts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-50
2.8.5 Receiver Response Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-51
3.0 Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
3.1 Registers Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
3.2 Control Register Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
3.3 Configuration Control Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
0x00—CONFIG_1 (Configuration Control Register 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
0x01—CONFIG_2 (Configuration Control Register 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7
0x02—CONFIG_3 (Configuration Control Register 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9
0x29—CONFIG_4 (Configuration Control Register 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10
0x31—CONFIG_5 (Configuration Control Register 5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11
0x2B—UTOPIA_1 (Utopia Port Control Register 1). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12
0x2C—UTOPIA_2 (Utopia Port Control Register 2). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13
3.4 Transmit Control Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14
0x03—TXFEAC_ERRPAT (Transmit FEAC/Error Pattern Register) . . . . . . . . . . . . . . . . . . . . . . . . . 3-14
0x60—DL_CTRL_STAT (HDLC Data Link Control and Status Register) . . . . . . . . . . . . . . . . . . . . . 3-15
0x04–0x07—CELL_GEN_x (Cell Generation Control Registers) . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-16
0x08—TX_RATE_23 (Transmit Rate Control Register) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-17
0x09—TX_RATE_01 (Transmit Rate Control Register) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-17
0x0A—TX_IDLE_12 (Transmit Idle Header Register) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-17
0x0B—TX_IDLE_34 (Transmit Idle Header Register) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-17
0x2A—IDLE_PAY (Transmit Idle Cell Payload Register) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-18
0x0C–0x13—TX_HDRx_12, TX_HDRx_34 (Transmit Header Registers) . . . . . . . . . . . . . . . . . . . . 3-18
100046C
Conexant
v
5 Page 
1
1.0 Product Description
The CN8223 ATM Physical Interface (PHY) device is a transmitter/receiver
which converts several types of frames to ATM cells and vice versa. The device
contains framers for DS3, E3, E4, STS-1, STS-3c, and STM-1. This chapter
provides an overview of the CN8223, describing its primary features and
applications. A block diagram and a logic diagram are included.
1.1 Block Diagram
Figure 1-1 is a detailed block diagram of the CN8223. The host system transmits
octet-wide data to the CN8223 via the UTOPIA or FIFO ports. This data is
assembled into ATM cells by the PHY and formatted for serial line transmission
by the CN8223’s line framers. In the receive direction, serial network data is
framed into octets by either internal or external line framers and passed to the
ATM cell processing block. Octet data is then aligned into ATM cells, checked,
and sent through the UTOPIA or FIFO ports to the host system.
The line framer block connects to external interfaces for line reception and
transmission. The line framer has interfaces for seven data rates and provisions
for external serial or parallel framers. Also included are overhead interfaces, data
links, and event counters.
The HEC/PLCP ATM cell alignment block accepts octet data from the line
framer block. It generates cells for transmission and validates received cells.
Included are HEC/PLCP generators and detectors, data scramblers, and counters.
The FIFO Port/UTOPIA interface communicates with the next layer of ATM
processing, usually residing in the host system. It directs received cell traffic to
four ports, controls transmit priority and rate, and has counters for events and
errors.
100046C
Conexant
1-1
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet CN8223.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| CN8223 | ATM Transmitter/Receiver with UTOPIA Interface | Conexant Systems |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |