|
|
Teilenummer | AD310 |
|
Beschreibung | MRC Decoder | |
Hersteller | ETC | |
Logo | ||
Gesamt 1 Seiten Installing MRC AD310 decoder in MRC F7A locomotive
1. Remove the body from the F7A locomotive.
2. Remove black plastic clips from the F7A printed circuit board (PCB)
3. Remove all wires from the PCB except for the red and black wires from the
wheels (trucks). Leave them in their original locations.
4. All color wires on the decoder have a corresponding matching color on the
F7A except the yellow decoder wire (there is no yellow wire on the F7A)
5. Match the wire colors from the F7A and decoder and attach them to corre-
sponding pads on the PCB using the plastic caps or by soldering. The yellow
wire from the decoder will be by itself.
6. Attach the decoder wires neatly and replace the body shell on the locomotive
carefully as not to crimp or tear wires from the decoder.
WHITE
YELLOW
WHITE
ORANGE
BLUE
FRONT
LIGHT
BLUE
WHITE
YELLOW
BLUE GRAY
BLACK
RED
AD310
TO BLACK
TO RED
GRAY TO MOTOR
ORANGE TO MOTOR
| ||
Seiten | Gesamt 1 Seiten | |
PDF Download | [ AD310 Schematic.PDF ] |
Teilenummer | Beschreibung | Hersteller |
AD310 | MRC Decoder | ETC |
AD310-25 | GaAs IC 4-Bit Digital Attenuator | Skyworks Solutions |
Teilenummer | Beschreibung | Hersteller |
CD40175BC | Hex D-Type Flip-Flop / Quad D-Type Flip-Flop. |
Fairchild Semiconductor |
KTD1146 | EPITAXIAL PLANAR NPN TRANSISTOR. |
KEC |
www.Datenblatt-PDF.com | 2020 | Kontakt | Suche |