|
|
Número de pieza | SPI-236-17 | |
Descripción | Ultraminiature photointerrupter (single-transistor type) | |
Fabricantes | Sanyo Semicon Device | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de SPI-236-17 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! Ordering number : EN6025
SPI-236-17
GaAs Infrared LED
SPI-236-17
Ultraminiature photointerrupter
(single-transistor type)
Features
• GaAs Infrared LED plus Single Phototransistor
• Photo-Interrupter
• Contact type
• Compact type : H3.25 ! L5.0 ! W4.5mm
• Application : For the general public welfare
Absolute Maximum Ratings at Ta=25°C, 65%RH (as per JIS C 7032 )
Parameter
Symbol
Forward Current *1
IF
Input LED
Reverse Voltage
Power Dissipation
VR
PD
Output
Phototransistor
Collector-Emitter Voltage
Emitter-Collector Voltage
Collector Curren
VCEO
VECO
IC
Power Dissipation
Operating Temperature
PC
Topr
Storage Temperature
Tstg
Soldering Temperature *2
Tsol
*1 See forward current derating
*2 Soldering conditions : time : max. 3sec; clearance : min. 1mm from lower stay
Rating
50
5
70
20
5
20
70
--20 to +80
--30 to +85
260
Unit
mA
V
mW
V
V
mA
mW
°C
°C
°C
Electro-Optical Characteristics at Ta=25°C, 65%RH
Input
Output
Parameter
Forward Voltage
Reverse Current
Dark Current
Collector Output Current
Symbol
VF
IR
ICEO
IC
Coupled
Collector Emitter
Saturation Voltage
VCE(sat)
Rise Time
tr
Fall Time
tf
*1 Measurement Circuit of Collector Current
Condition
IF=10mA
VR=5V
IF=0mA, VCE=10V
IF=10mA,VCE=5V*1
IF=10mA, IC=50µA
VCC=5V, RL=100Ω
IC=1mA
*2 Table of Classification of Collector Output
Class
A
B
C
Ic (µA) 880 to 460 635 to 330 460 to 240
IF=10mA
Min. Typ. Max.
1.0 1.15 1.4
-- -- 10
-- 10 200
240 500 880
-- -- 0.5
-- 5 --
-- 5 --
VCE=5V
Ic
A
Unit
V
µA
nA
µA
V
µs
µs
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
72199 GI, (MI) No.6025 1/6
1 page SPI-236-17
Package dimensions and Pin connection
As stated in the sttached paper. (No.6025 4/6)
Soldering conditions
(1) Temperature : Max. 260°C
(2) Time
: Max. 3 sec
(3) Clearance : Min. 1mm from stay (include PCB thickness)
PRECAUTIONS
(1) Bending a lead should avoid. However, when bending is necessary, take care the next items.
q Bending a lead must be done before soldering.
w Bending a lead must be done in the states of fixing leads and no stress for the regin part. Because it is possible that
stress for the regin part cause troubles such as gold wire breaking and so on.
e A lead must be bend under the stay.
r Do not bend the same position of leads more than twice.
(2) The hole pitch of a circuit board must fit to the lead pitch.
(3) Two stays coupling LED and Ph. Tr should be isolated from any PCB pattern or any lead.
(4) Take core the following when soldering.
q Do not heat a product under any stress (a twist and so on) to leads.
w Do not heat a product in the states of operating force to the regin part.
(5) Use the flux which contain no chlorine, have no corrosion and do not need washing.
(6) Be careful that flux or other chemicals do not attach to the luminous surface and passive surface.
No.6025 5/6
5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet SPI-236-17.PDF ] |
Número de pieza | Descripción | Fabricantes |
SPI-236-17 | Ultraminiature photointerrupter (single-transistor type) | Sanyo Semicon Device |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |